flat tire TOYOTA AVALON 2009 XX30 / 3.G Quick Reference Guide

24
SAFETY AND EMERGENCY FEATURES
System reset initiali zation
1. Push and hold “ SET” button
until the indicator blinks
three times.
2. Wait a few minutes to allow
initialization to complete.
Seat belt comfort guide
Rear seat outside position guides provide added comfort for children who
have outgrown child restraints.
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to “ON” and press and hold the
“ SET” button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner
’s Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local To y o t a dealer.
Note :The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently

, setting the tire pressures to factory
specifications should turn off the light.
Tire Pressure Monitoring (warning)
System
412714M2_r1.qxd 7/23/08 5:13 PM Page 24