charging TOYOTA AVENSIS 2003 Service Repair Manual

022L4±02
02±36
±
PREPARATION AUTOMATIC TRANSMISSION / TRANS
AVENSIS REPAIR MANUAL (RM1018E)
AUTOMATIC TRANSMISSION / TRANS
PREPARATION
SST
07110±58060Air Conditioner Service Tool SetTRANSMISSION CONTROL CABLE
ASSY
(07117±58060)Refrigerant Drain Service ValveTRANSMISSION CONTROL CABLE
ASSY
(07117±58070)T±JointTRANSMISSION CONTROL CABLE
ASSY
(07117±58080)Quick Disconnect AdapterTRANSMISSION CONTROL CABLE
ASSY
(07117±58090)Quick Disconnect AdapterTRANSMISSION CONTROL CABLE
ASSY
(07117±78050)Refrigerant Charging GaugeTRANSMISSION CONTROL CABLE
ASSY
(07117±88060)Refrigerant Charging HoseTRANSMISSION CONTROL CABLE
ASSY
(07117±88070)Refrigerant Charging HoseTRANSMISSION CONTROL CABLE
ASSY
(07117±88080)Refrigerant Charging HoseTRANSMISSION CONTROL CABLE
ASSY
09023±12700Union Nut Wrench 17mmAUTOMATIC TRANSAXLE
ASSY(U241E)
AUTOMATIC TRANSAXLE
ASSY(U341E)
09308±00010Oil Seal PullerFRONT DIFFERENTIAL OIL
SEAL(U241E)
FRONT DIFFERENTIAL OIL
SEAL(U341E)
09316±60011Transmission & Transfer Bearing
ReplacerFRONT DIFFERENTIAL OIL
SEAL(U241E)
http://vnx.su

02±48
±
PREPARATION HEATER & AIR CONDITIONER
AVENSIS REPAIR MANUAL (RM1018E)
(07117±58080)Quick Disconnect AdapterREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
(07117±58090)Quick Disconnect AdapterREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
(07117±78050)Refrigerant Charging GaugeREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
http://vnx.su

±
PREPARATION HEATER & AIR CONDITIONER
02±49
AVENSIS REPAIR MANUAL (RM1018E)
(07117±88060)Refrigerant Charging HoseREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
(07117±88070)Refrigerant Charging HoseREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
(07117±88080)Refrigerant Charging HoseREFRIGERANT
AIR CONDITIONING RADIATOR
ASSY
W/RECEIVER CONDENSER ASSY
W/PULLEY COMPRESSOR
ASSY(1AZ±FE)
W/PULLEY COMPRESSOR
ASSY(1AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(1CD±FTV)
W/PULLEY COMPRESSOR
ASSY(1ZZ±FE)
W/PULLEY COMPRESSOR
ASSY(2AZ±FSE)
W/PULLEY COMPRESSOR
ASSY(3ZZ±FE)
07117±48130Vacuum Pump (220 V)W/RECEIVER CONDENSER ASSY
07117±48140Vacuum Pump (240 V)W/RECEIVER CONDENSER ASSY
09870±00015A/C Quick Joint Puller No.1AIR CONDITIONING RADIATOR
ASSY
http://vnx.su

022J9±01
02±24
±
PREPARATION STARTING & CHARGING
AVENSIS REPAIR MANUAL (RM1018E)
STARTING & CHARGING
PREPARATION
SST
09249±63010Torque Wrench AdaptorGENERATOR
ASSY(1AZ±FE/1AZ±FSE)
Recomended Tools
09082±00040TOYOTA Electrical TesterSTARTING SYSTEM(1AZ±FE)
STARTING SYSTEM(1AZ±FSE)
STARTING SYSTEM
(1ZZ±FE/3ZZ±FE)
(09083±00150)Test Lead SetSTARTING SYSTEM(1AZ±FE)
STARTING SYSTEM(1AZ±FSE)
STARTING SYSTEM
(1ZZ±FE/3ZZ±FE)
09216±00021Belt Tension GaugeGENERATOR ASSY(1CD±FTV)
Equipment
Slide calipers
Ammeter(A)
Ohmmeter
Radiator cap tester
Torque wrench
Service Wire Harness
http://vnx.su

031FQ±01
±
SERVICE SPECIFICATIONS INTAKE
03±11
AVENSIS REPAIR MANUAL (RM1018E)
INTAKE
SERVICE DATA
1AZ±FSE:
Vacuum switching valve assy No. 1
Resistance at 20
C (68
F)
33 to 39

1CD±FTV:
Turbocharging pressure
Standard pressure
15 to 45 kPa (0.15 to 0.46 kgf/cm2, 2.2 to 6.5 psi)
Turbo pressure sensor
Voltage 3 (VC) ± 1 (E2)
Voltage drop apply vacuum 13.3 kPa (100 mmHg, 3.94 in.Hg)
apply vacuum 26.7 kPa (200 mmHg, 7.87 in.Hg)
apply vacuum 40.0 kPa (300 mmHg, 11.81 in.Hg)
apply vacuum 57.3 kPa (400 mmHg, 15.75 in.Hg)
apply vacuum 66.7 kPa (500 mmHg, 19.96 in.Hg)
Voltage up applied vacuum 19.6 kPa (0.20 kgf/cm2, 2.84 psi) applied vacuum 39.2 kPa (0.40 kgf/cm2, 5.69psi)
applied vacuum 58.8 kPa (0.60 kgf/cm2, 8.53psi)
applied vacuum 78.5 kPa (0.80 kgf/cm2, 11.4psi)
applied vacuum 98.0 kPa (1.00 kgf/cm2, 14.2psi)
4.5 to 5.5 V
0.1 to 0.3 V
0.3 to 0.5 V
0.5 to 0.7 V
0. 7 to 0.9 V
0. 9 to 1.0 V
0.1 to 0.4 V
0.4 to 0.7 V
0.7 to 1.0 V
1.0 to 1.3 V
1.3 to 1.6 V
http://vnx.su

031E6±01
03±32
±
SERVICE SPECIFICATIONS STARTING & CHARGING
AVENSIS REPAIR MANUAL (RM1018E)
STARTING & CHARGING
SERVICE DATA
1ZZ±FE/3ZZ±FE:
Starter assy Rated voltage and output power
Specified current
12 V 1.3 kW
85 A or less at 11.5 V
Starter relay
Specified condition 1 ± 2 3 ± 5
Continuity
No continuity
Battery
Voltage at 20
C (68
F)
12.5 to 12.9 V
Voltage regulator Regulating voltage
Standard amperage12.9 to 14.9 V
10 A or less
1AZ±FE:
Starter assy Rated voltage and output power
Specified current
12 V 1.3 kW
85 A or less at 11.5 V
Starter relay
Specified condition 1 ± 2 3 ± 5
Continuity
No continuity
Battery
Voltage at 20
C (68
F)
12.5 to 12.9 V
Voltage regulator Regulating voltage
Standard amperage12.9 to 14.9 V
10 A or less
1AZ±FSE:
Starter (1.3 kW type) Rated voltage and output power
No±load characteristics Current
12 V 1.3 kW
85 A or less at 11.5 V
Starter (1.6 kW type)
Rated voltage and output power
No±load characteristics Current
12 V 1.6 kW
75 A or less at 11.5 V
Starter relay
Specified condition 1 ± 2 3 ± 5
Continuity
No continuity
Battery
Voltage at 20
C (68
F)
12.5 to 12.9 V
Voltage regulator Regulating voltage
Standard amperage12.9 to 14.9 V
10 A or less
1CD±FTV:
Starter assy Rated voltage and output power
Specified current
12 V 2.0 kW
190 A or less at 11.5 V
Starter relay
Specified condition 1 ± 2 3 ± 5
Continuity
No continuity
Battery
Except maintenance±free battery Standard specific gravity
Voltage at 20
C (68
F)
1.25 to 1.29 at 20
C (68
F)
12.5 to 12.9 V
Voltage regulator Regulating voltage
Standard amperage13.2 to 14.8 V
10 A or less
Glow plugs
Resistance at 20
C (68
F)
Approx. 0.72

Glow plug relay
Specified condition 1 ± 2
3 ± 4
No continuity
Continuity
http://vnx.su

031E7±03
±
SERVICE SPECIFICATIONS STARTING & CHARGING
03±33
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
1ZZ±FE/3ZZ±FE:
Part TightenedN
mkgf
cmft
lbf
Starter assy x Transaxle housing3737828
Starter wire x Starter assy9.81007
Generator assy x Transverse engine engine mounting bracket2525518
Generator assy x Cylinder block sub±assy5455140
Generator wire x Generator assy9.81007
Lead wire of field coil x Terminal C5.96052 in.
lbf
1AZ±FE/1AZ±FSE:
Part TightenedN
mkgf
cmft
lbf
Wire harness clamp bracket x Starter assy8.48674 in.
lbf
Starter assy x Cylinder block sub±assy3738028
Starter wire x Starter assy9.81007
Battery carrier x Body131319
Battery clamp sub±assy x Body5.05144 in.
lbf
Battery clamp sub±assy x Battery clamp bolt3.63631 in.
lbf
Terminal x Battery5.45548 in.
lbf
Wire harness clamp bracket x Generator assy8.48674 in.
lbf
Generator assy x Cylinder block sub±assy Bolt A
Bolt B52
21530
21438
16
Generator wire x Generator assy9.81007
Lead wire of field coil x Terminal C5.96052 in.
lbf
1CD±FTV:
Part TightenedN
mkgf
cmft
lbf
Starter x Transaxle Bolt
Terminal 3037
9.8377
10027
7.2
Generator assy x Engine M8
M10
Alternator wire Wire harness31
47
9.8
5.0320
475
100
5123
347
44 in.
lbf
Glow plug assy x Cylinder head Glow plug
Nut12.32.2125229
19 in.
lbf
Engine cover No. 1 x Cylinder head cover sub±assy8.08271 in.
lbf
Engine cover No. 1 x Intake manifold8.08271 in.
lbf
Front wheel RH1031,05076
http://vnx.su

110UX±01
Fuel Tube Connector
A50710
A60083
Fuel Pipe
Clamp No.1
AA
B12941
±
FUELFUEL SYSTEM(1AZ±FE)
11±19
AVENSIS REPAIR MANUAL (RM1018E)
ON±VEHICLE INSPECTION
1.CHECK FUEL PRESSURE
(a)Discharge the pressure in the fuel system and take pre-
cautions for possible fuel spillage.(See page 11±15)
(b) Check that the battery voltage is above 12 V.
(c) Disconnect the negative (±) battery cable.
(d) Pull out the connecter from a new fuel tube.
HINT:
Part No. 23901±0H040
(e) Remove the fuel pipe clamp No.1 from the fuel tube con- nector.
(f) Disconnect the fuel tube connector from the fuel pipe while pinching part A with fingers as shown in the illustra-
tion.
CAUTION:

Do not disconnect the fuel tube connector (quick
type) until after you have discharged the fuel system
pressure and taken appropriate steps to prevent fuel
spillage.

There may be remained pressure in the fuel lines after
discharging the pressure.
Take precautions to prevent fuel from spraying on
you or your clothing or inside the engine compart-
ment.
http://vnx.su

110UW±01
A75341
Fuel
Pump
Connector
B00679
Vinyl or Plastic Bag
±
FUELFUEL SYSTEM(1AZ±FE)
11±15
AVENSIS REPAIR MANUAL (RM1018E)
FUEL SYSTEM(1AZ±FE)
PRECAUTION
1.PRECAUTION
(a)Before working on fuel system, disconnect negative (±) battery cable.
(b)Do not smoke or work near fire when handling the fuel system.
(c)Keep gasoline away from rubber or leather parts.
2.DISCHARGE FUEL SYSTEM PRESSURE
CAUTION:

Do not disconnect any part of the fuel system until
you have discharged the fuel system pressure.

Even after discharging the fuel pressure, place a
shop rag over fittings as you separate them to reduce
risk of fuel spray on yourself or in the engine compart-
ment.
(a)Disconnect the fuel pump connector.
(b)Start the engine. After the engine has stopped, turn the ignition switch OFF.
(c)Disconnect the negative (±) battery cable.
(d)Connect the fuel pump connector.
3.FUEL SYSTEM
(a)When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe these proce-
dures.
(1)Discharge the pressure in the fuel system. (See step 2)
(2)Disconnect the fuel pump tube. (See page 11±93)
(3) Drain the fuel that remained inside the fuel pump
tube.
(4) Cover the disconnected fuel pump tubes with a vinyl or a plastic bag to prevent damage and dirt.
(5) Place a tray under the vehicle or point of disconnec- tion to catch any fuel that may spill.
http://vnx.su

110UU±01
Fuel Tube Connector
A50710
A60083
Fuel Pipe
Clamp No.1
AA
B12941
±
FUELFUEL SYSTEM(1ZZ±FE/3ZZ±FE)
11±5
AVENSIS REPAIR MANUAL (RM1018E)
ON±VEHICLE INSPECTION
1.CHECK FUEL PRESSURE
(a)Discharge the pressure in the fuel system and take pre-
cautions for possible fuel spillage. (See page 11±1)
(b) Check that the battery voltage is above 12 V.
(c) Disconnect the negative (±) battery cable.
(d) Pull out the connecter from a new fuel tube.
HINT:
Part No. 23901±0D030
(e) Disconnect the fuel tube clamp from the fuel tube connec- tor.
(f) Disconnect the fuel tube connector from the fuel pipe while pinching part A with fingers as shown in the illustra-
tion.
CAUTION:

Do not disconnect the fuel tube connector (quick
type) until after you have discharged the fuel system
pressure and taken appropriate steps to prevent fuel
spillage.

There may be remained pressure in the fuel lines after
discharging the pressure.
Take precautions to prevent fuel from spraying on
you or your clothing or inside the engine compart-
ment.
http://vnx.su