audio TOYOTA AVENSIS 2003 Service User Guide

670SC±03
67±16
±
AUDIO & VISUAL SYSTEM AMPLIFIER ANTENNA ASSY (SEDAN MODELS)
AVENSIS REPAIR MANUAL (RM1018E)
AMPLIFIER ANTENNA ASSY (SEDAN MODELS)
REPLACEMENT
1.DISCONNECT BATTERY NEGATIVE TERMINAL (See page 60±1)
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.2 (See page 71±11)
3. REMOVE INSTRUMENT PANEL REGISTER ASSY CTR (W/ NAVIGATION SYSTEM) (See page 67±6)
4.REMOVE SHIFT LEVER KNOB SUB±ASSY (M/T TRANSAXLE) (See page 41±11)
5.REMOVE CONSOLE PANEL SUB±ASSY UPPER (See page 71±11)
6.REMOVE RADIO RECEIVER ASSEMBLY W/BRACKET (See page 67±5)
7.REMOVE CONSOLE BOX ASSY RR (See page 71±11)
8.REMOVE HEATER TO REGISTER DUCT NO.2 (See page 71±11)
9.REMOVE FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT72±16)
10.REMOVE FRONT DOOR SCUFF PLATE RH (See page 76±36)
11.REMOVE REAR DOOR SCUFF PLATE RH (See page 76±36)
12.REMOVE COWL SIDE TRIM BOARD RH (See page 76±36)
13.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
14.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
15.REMOVE REAR SEAT CUSHION ASSEMBLY (See page 72±32)
16.REMOVE REAR SEATBACK ASSY (See page 40/60 FOLDING 72±27, UNITED FIXED 72±32)
17.REMOVE ROOF SIDE GARNISH INNER RH (See page 76±36)
18. REMOVE FLOOR CARPET ASSY FRONT
http://vnx.su

I35246Clamps
w/ Navigation:
w/ Navigation:
±
AUDIO & VISUAL SYSTEM AMPLIFIER ANTENNA ASSY (SEDAN MODELS)
67±17
AVENSIS REPAIR MANUAL (RM1018E)
19. REMOVE AMPLIFIER ANTENNA ASSY
(a) Disconnect the connectors.
(b) w/ Navigation:
Remove the 2 bolts, nut and screw.
w/o Navigation:
Remove the 2 bolts and nut.
(c) w/ Navigation:
Remove the 11 clamps and amplifier antenna assy.
w/o Navigation:
Remove the 10 clamps and amplifier antenna assy.
http://vnx.su

67±18
±
AUDIO & VISUAL SYSTEMAMPLIFIER ANTENNA ASSY(SEDAN MODELS)
AVENSIS REPAIR MANUAL (RM1018E)
20.INSTALL AMPLIFIER ANTENNA ASSY
(a)Install the 2 bolts. Torque: 7.0 N
m (71 kgf
cm, 62 in.
lbf)
(b)w/ Navigation: Install the nut and screw.
w/o Navigation:
Install the nut.
(c)w/ Navigation: Install the 11 clamps and the amplifier antenna assy.
w/o Navigation:
Install the 10 clamps and the amplifier antenna assy.
(d)Connect the connectors.
21.REMOVE REAR SEAT CUSHION ASSEMBLY (See page 72±32)
22.REMOVE REAR SEATBACK ASSY (See page 40/60 FOLDING 72±27, UNITED FIXED 72±32)
23.REMOVE FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT 72±16)
http://vnx.su

670SD±02
±
AUDIO & VISUAL SYSTEM AMPLIFIER ANTENNA ASSY (WAGON MODELS)
67±19
AVENSIS REPAIR MANUAL (RM1018E)
AMPLIFIER ANTENNA ASSY (WAGON MODELS)
REPLACEMENT
1.DISCONNECT BATTERY NEGATIVE TERMINAL (See page 60±1)
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.2 (See page 71±11)
3. REMOVE INSTRUMENT PANEL REGISTER ASSY CTR (W/ NAVIGATION SYSTEM)
(See page 67±6)
4.REMOVE SHIFT LEVER KNOB SUB±ASSY (M/T TRANSAXLE) (See page 41±11)
5.REMOVE CONSOLE PANEL SUB±ASSY UPPER (See page 71±11)
6.REMOVE RADIO RECEIVER ASSEMBLY W/BRACKET (See page 67±5)
7.REMOVE CONSOLE BOX ASSY RR (See page 71±11)
8.REMOVE HEATER TO REGISTER DUCT NO.2 (See page 71±11)
9.REMOVE FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT 72±16)
10.REMOVE FRONT DOOR SCUFF PLATE RH (See page 76±36)
11.REMOVE REAR DOOR SCUFF PLATE RH (See page 76±36)
12.REMOVE COWL SIDE TRIM BOARD RH (See page 76±36)
13.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
14.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
15. REMOVE REAR SEAT CUSHION ASSEMBLY
(See page 40/60 FOLDING FLIP±UP CUSHION72±21, 40/60 FOLDING 72±27)
16. REMOVE REAR SEATBACK ASSY
(See page 40/60 FOLDING FLIP±UP CUSHION72±21, 40/60 FOLDING 72±27)
17. REMOVE REAR SIDE SEAT BACK ASSY RH (See page 40/60 FOLDING FLIP±UP CUSHION72±21, 40/60 FOLDING 72±27)
18. REMOVE TONNEAU COVER ASSY
19.REMOVE BACK DOOR WEATHERSTRIP (See page 76±54)
20.REMOVE DECK BOARD SUB±ASSY (See page 76±54)
21.REMOVE DECK FLOOR BOX REAR (See page 76±54)
22.REMOVE DECK FLOOR BOX FRONT (See page 76±54)
23.REMOVE DECK FLOOR BOX RH (See page 76±54)
24.REMOVE REAR FLOOR FINISH PLATE (See page 76±54)
25.REMOVE DECK TRIM SIDE BOARD RH (See page 76±54)
26.REMOVE ROOF SIDE GARNISH INNER RH (See page 76±54)
27. REMOVE FLOOR CARPET ASSY FRONT
http://vnx.su

I35215Clamps
w/ Navigation:
67±20
±
AUDIO & VISUAL SYSTEM AMPLIFIER ANTENNA ASSY (WAGON MODELS)
AVENSIS REPAIR MANUAL (RM1018E)
28. REMOVE AMPLIFIER ANTENNA ASSY
(a) Disconnect the connectors.
(b) w/ Navigation: Remove the 3 bolts, nut and screw.
w/o Navigation:
Remove the 3 bolts and nut.
(c) w/ Navigation:
Remove the 15 clamps and the amplifier antenna assy.
w/o Navigation:
Remove the 14 clamps and the amplifier antenna assy.
http://vnx.su

±
AUDIO & VISUAL SYSTEM AMPLIFIER ANTENNA ASSY (WAGON MODELS)
67±21
AVENSIS REPAIR MANUAL (RM1018E)
29. INSTALL AMPLIFIER ANTENNA ASSY
(a) Install the 3 bolts.
Torque: 7.0 N
m (71 kgf
cm, 62 in.
lbf)
(b) w/ Navigation: Install the nut and screw.
w/o Navigation:
Install the nut.
(c) w/ Navigation: Install the 15 clamps and the amplifier antenna assy.
w/o Navigation:
Install the 14 clamps and the amplifier antenna assy.
(d) Connect the connectors.
30. INSTALL REAR SEATBACK ASSY
(See page 40/60 FOLDING FLIP±UP CUSHION72±21, 40/60 FOLDING 72±27)
31.REMOVE FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT 72±16)
http://vnx.su

670SF±01
I35218: Clamp
I36708
±
AUDIO & VISUAL SYSTEMANTENNA CORD SUB±ASSY
67±23
AVENSIS REPAIR MANUAL (RM1018E)
ANTENNA CORD SUB±ASSY
REPLACEMENT
1.REMOVE ROOF HEADLINING ASSY (See page 76±45)
2.REMOVE BACK DOOR TRIM PANEL ASSY UPPER (See page 75±40)
3.REMOVE ANTENNA CORD SUB±ASSY
(a)Disconnect the connectors.
(b)Remove the bolt.
(c)Remove the clamp and draw out the antenna cord sub±assy from the inte\
rior and the back door.
4.INSTALL ANTENNA CORD SUB±ASSY
(a)Press the 4 points of the grommet shown in the illustra-tion, and install the antenna cord sub±assy.
(b)Install the bolt. Torque: 7.0 N
m (71 kgf
cm, 62 in.
lbf)
(c)Connect the connectors.
5.INSTALL ROOF HEADLINING ASSY (See page 76±45)
http://vnx.su

670SG±02
67±24
±
AUDIO & VISUAL SYSTEM ANTENNA CORD SUB±ASSY NO.3
AVENSIS REPAIR MANUAL (RM1018E)
ANTENNA CORD SUB±ASSY NO.3
REPLACEMENT
1.DISCONNECT BATTERY NEGATIVE TERMINAL (See page 60±1)
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.2 (See page 71±11)
3. REMOVE INSTRUMENT PANEL REGISTER ASSY CTR (W/ NAVIGATION SYSTEM) (See page 67±6)
4.REMOVE SHIFT LEVER KNOB SUB±ASSY (M/T TRANSAXLE) (See page 41±11)
5.REMOVE CONSOLE PANEL SUB±ASSY UPPER (See page 71±11)
6.REMOVE RADIO RECEIVER ASSEMBLY W/BRACKET (See page 67±5)
7.REMOVE CONSOLE BOX ASSY RR (See page 71±11)
8.REMOVE HEATER TO REGISTER DUCT NO.2 (See page 71±11)
9.REMOVE FRONT DOOR SCUFF PLATE RH (See page 76±36)
10.REMOVE REAR DOOR SCUFF PLATE RH (See page 76±36)
11.REMOVE COWL SIDE TRIM BOARD RH (See page 76±36)
12.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
13.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (See page 76±36)
14. REMOVE REAR SEAT CUSHION ASSEMBLY
(See page 40/60 FOLDING FLIP±UP CUSHION 72±21, 40/60 FOLDING 72±27)
15. REMOVE REAR SEATBACK ASSY (See page 40/60 FOLDING FLIP±UP CUSHION 72±21, 40/60 FOLDING 72±27)
16. REMOVE REAR SIDE SEAT BACK ASSY RH (See page 40/60 FOLDING FLIP±UP CUSHION 72±21, 40/60 FOLDING 72±27)
17.REMOVE PACKAGE TRAY TRIM PANEL ASSY (See page 76±45)
18.REMOVE REAR FLOOR FINISH PLATE (See page 76±45)
19.REMOVE DECK TRIM SIDE PANEL ASSY RH (See page 76±45)
20.REMOVE ROOF SIDE GARNISH INNER RH (See page 76±45)
21.REMOVE FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT 72±16)
22. REMOVE FLOOR CARPET ASSY FRONT
http://vnx.su

I35217Clamps
w/ Navigation:
w/ Navigation:
±
AUDIO & VISUAL SYSTEM ANTENNA CORD SUB±ASSY NO.3
67±25
AVENSIS REPAIR MANUAL (RM1018E)
23. REMOVE ANTENNA CORD SUB±ASSY NO.3
(a) Disconnect the connectors.
(b) w/ Navigation:
Remove the bolt, nut and screw.
w/o Navigation:
Remove the bolt and nut.
(c) w/ Navigation:
Remove the 11 clamps and the antenna cord sub±assy No.3.
w/o Navigation:
Remove the 10 clamps and the antenna cord sub±assy No.3.
http://vnx.su

67±26
±
AUDIO & VISUAL SYSTEMANTENNA CORD SUB±ASSY NO.3
AVENSIS REPAIR MANUAL (RM1018E)
24.INSTALL ANTENNA CORD SUB±ASSY NO.3
(a)Install the bolt. Torque: 7.0 N
m (71 kgf
cm, 62 in.
lbf)
(b)w/ Navigation: Install the nut and screw.
w/o Navigation:
Install the nut.
(c)w/ Navigation: Install the 11 clamps and the antenna cord sub±assy No.3.
w/o Navigation:
Install the 10 clamps and the antenna cord sub±assy No.3.
25.INSTALL REAR SEATBACK ASSY
(See page 40/60 FOLDING FLIP±UP CUSHION 72±21, 40/60 FOLDING 72±27)
26.INSTALL FRONT SEAT ASSY RH (See page POWER SEAT 72±11, MANUAL SEAT 72±16)
http://vnx.su