brake TOYOTA AVENSIS 2003 Service User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2003, Model line: AVENSIS, Model: TOYOTA AVENSIS 2003Pages: 2234, PDF Size: 56.95 MB
Page 49 of 2234

APPENDIX
Vehicle GradeBody Type
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Item Area
Model Code
Overall Length mm (in.)
Width mm (in.)
Height mm (in.)
Wheel Base mm (in.)
Tread Front mm (in.)
Rear mm (in.)
Room Front mm (in.)
Rear mm (in.)
Overhang
Curb Weight
Gross Vehicle Weight Front kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (Imp.gal.)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Speed
Min. Turning Radius 0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km
/h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Tire m (ft.)
Body m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type or Injection Pump Type (Diesel)Research Octane No. or Cetane No. (Diesel)
Max. Output (EEC) kW / rpm
Max. Torque (EEC) N
.m / rpm
Battery Capacity (5HR) Voltage & Amp. hr.
Alternator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering Type In First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimension & Vehicle Weights
Performance
Engine
Engine
Chassis Electric
EUROPE
5-Door Wagon
MID ELEGANT
Length mm (in.)
Width mm (in.)
Height mm (in.) ENTRY
AP-18
AZT250R-AWPGHW AZT250L-AWPGHW CDT250R-AWMNYW CDT250L-AWMNYW
4700 (185.0) 4700 (185.0)4700 (185.0)4700 (185.0)
1760 (69.3) 1760 (69.3)1760 (69.3)1760 (69.3)
1525 (60.0) 1525 (60.0)1525 (60.0)1525 (60.0)
2700 (106.3) 2700 (106.3)2700 (106.3)2700 (106.3)
1506 (59.3) 1506 (59.3)1506 (59.3)1506 (59.3)
1510 (59.4) 1510 (59.4)1510 (59.4)1510 (59.4)
2090 (82.3) 2090 (82.3)2090 (82.3)2090 (82.3)
1485 (58.5) 1485 (58.5)1485 (58.5)1485 (58.5)
1210 (47.6), 1160 (45.7)*
11210 (47.6), 1160 (45.7)*11210 (47.6), 1160 (45.7)*11210 (47.6), 1160 (45.7)*1
910 (35.8) 910 (35.8)910 (35.8)910 (35.8)
1095 (43.1) 1095 (43.1)1095 (43.1)1095 (43.1)
135 (5.3), 155 (6.1)*
2135 (5.3), 155 (6.1)*2135 (5.3), 155 (6.1)*2135 (5.3), 155 (6.1)*2
13.1 , 14.5 *213.1, 14.5 *213.1, 14.5 *213.1, 14.5 *2
18, 19.2 *218, 19.2 *218, 19.2 *218, 19.2 *2
800 - 825 (1764 - 1819) 800 - 825 (1764 - 1819) 850 - 900 (1874 - 1984) 850 - 900 (1874 - 1984)
585 - 595 (1290 - 1312) 585 - 595 (1290 - 1312) 580 - 590 (1279 - 1301) 580 - 590 (1279 - 1301)
1385 - 1420 (3054 - 3131) 1385 - 1420 (3054 - 3131) 1430 - 1490 (3153 - 3285) 1430 - 1490 (3153 - 3285) 915 (2017) 915 (2017)985 (2172)985 (2172)
980 (2161) 980 (2161)985 (2172)985 (2172)
1895 (4178) 1895 (4178)1970 (4344)1970 (4344)
60 (15.9, 13.2) 60 (15.9, 13.2)60 (15.9, 13.2)60 (15.9, 13.2)
0.520 (18.4) 0.520 (18.4)0.520 (18.4)0.520 (18.4)
190 (118) 190 (118)190 (118)190 (118)
ÐÐÐÐ
11.3 11.311.411.4
17.7 17.717.817.8
63 (39) 63 (39)45 (27)45 (27)
114 (71) 114 (71) 84 (52)84 (52)
177 (110) 177 (110) 128 (79)128 (79)
Ð Ð176 (109) 176 (109)
5.6 (18.4) 5.6 (18.4)5.6 (18.4)5.6 (18.4)
5.995 (19.7) 5.995 (19.7)5.995 (19.7)5.995 (19.7)
1AZ-FSE 1AZ-FSE1CD-FTV 1CD-FTV
16-Valve, DOHC 16-Valve, DOHC16-Valve, DOHC16-Valve, DOHC
86.0 x 86.0 (3.39 x 3.39) 86.0 x 86.0 (3.39 x 3.39) 82.2 x 94.0 (3.24 x 3.70) 82.2 x 94.0 (3.24 x 3.70)
1998 (121.9) 1998 (121.9)1995 (121.7)1995 (121.7)
11.0 11.017.8 17.8
EFI EFICommon-Rail Type Common-Rail Type
95 or higher 95 or higher48 or higher48 or higher
108 / 5700 108 / 5700 85 / 360085 / 3600
196 / 4000 196 / 4000280 / 2000 - 2200 280 / 2000 - 2200
12 - 48 12 - 4812 - 6012 - 60
1200 120012001200
1.6 1.62.02.0
Ð ÐDry, Single Plate Dry, Single Plate
U241E*
4U241E*4E357 E357
3.943 3.9433.5383.538
2.197 2.1971.9131.913
1.413 1.4131.2581.258
1.020 1.0200.9180.918
Ð Ð0.690 0.690
3.145 3.1453.5833.583
ÐÐÐÐ
2.923 2.9233.6843.684
Ventilated Disc Ventilated DiscVentilated DiscVentilated Disc
Solid Disc Solid DiscSolid DiscSolid Disc
Drum DrumDrumDrum
Tandem 8º + 9º Tandem 8º + 9ºTandem 8º + 9ºTandem 8º + 9º
ÐÐÐÐ
MacPherson Strut. MacPherson Strut.MacPherson Strut.MacPherson Strut.
Double Wishbone Double WishboneDouble WishboneDouble Wishbone
STD STDSTDSTD
STD STDSTDSTD
Rack and Pinion Rack and PinionRack and PinionRack and Pinion
16.1 16.116.116.1
Integral Type Integral TypeIntegral TypeIntegral Type
*
1: With Sun Roof *4: Snow Mord Type
*2: Rough Road Pack
*3: Option
http://vnx.su
Page 83 of 2234

D25081
Spring Type Clamp
Clamp Track
D20025
CG
DLC3
TS
D30964
±
INTRODUCTION REPAIR INSTRUCTION
01±17
AVENSIS REPAIR MANUAL (RM1018E)
6. HANDLING OF HOSE CLAMPS
(a) Before removing the hose, check the depth of the insert-
ing portion and the clamp position to restore it surely.
(b) Change a deformed or dented clamp for a new one.
(c) In case of reusing a hose, attach the clamp on the clamp track portion of the hose.
(d) For a spring type clamp, adjust it by adding force to the
arrow mark direction after the installation.
7. FOR VEHICLES EQUIPPED WITH MOBILE COMMU- NICATION SYSTEMS
(a) Install the antenna as far away from the ECU and sensors of the vehicle electronic systems as possible.
(b) Install an antenna feeder at least 20 cm (7.87 in.) away from the ECU and sensors of the vehicle electronic sys-
tems. For details of the ECU and sensors locations, refer
to the section on applicable components.
(c) Prevent the antenna feeder from getting entangled with the other wiring, and keep the antenna feeder separate
from other wiring as much as possible.
(d) Check that the antenna and feeder are correctly adjusted.
(e) Do not install any high±powered mobile communication system.
8. FOR VEHICLES EQUIPPED WITH TRACTION CONTROL (TRC) SYSTEM
(a) NOTICES WHEN USING 2±WHEEL DRUM TESTER
(1) When using a 2±wheel drum tester such as a speedometer tester, a combination tester ofspeedometer and brake, chassis dynamometer or else, always turn the TRC system off via the
TRC OFF switch before measurement.
NOTICE:
TRC system OFF condition can be confirmed by the indication, ºTRC OFF\
º, of the warning light in
the combination meter.
9. FOR VEHICLES EQUIPPED WITH VEHICLE SKIDCONTROL (VSC) SYSTEM
(a) NOTICES WHEN USING DRUM TESTER
(1) When using a drum tester, be sure to start the en-gine with the ignition OFF, and connect SST to the
terminals TS and CG of the DLC3 before measure-
ment in order to prohibit the VSC operation.
SST 09843±18040
http://vnx.su
Page 85 of 2234

010B5±11
D25082
Rubber Attachment
D27697
: SUPPORT POSITION, PAN
TOGRAPH JACK POSITION
: CENTER OF VEHICLE GRAVITY
(unload condition)
: JACK POSITION
±
INTRODUCTION REPAIR INSTRUCTION
01±19
AVENSIS REPAIR MANUAL (RM1018E)
VEHICLE LIFT AND SUPPORT LOCATIONS
1. NOTICE ABOUT VEHICLE CONDITION WHEN JACKING UP
(a) As a rule, the vehicle must be unloaded when jacking up. Never jack up o\
r lift up the vehicle loaded
with things of heavy weight.
(b) When removing any parts of heavy weight like the engine and transmission, the center of gravity of the vehicle moves. Place a balance weight so as to keep it from rolling,\
or hold the jacking support
location using the mission jack.
2. NOTICE FOR USING 4 POST LIFT
(a) Follow the instruction manual for a safety operation.
(b) Do not damage tires or wheels with a free wheel beam.
(c) Using a wheel stopper, fix the vehicle.
3. NOTICE FOR USING JACK AND SAFETY STAND
(a) Work in the flat place using a wheel stopper at all times.
(b) Use a safety stand with a rubber attachment, as shownin the illustration.
(c) Support the specified location with a jack and safety stand accurately.
(d) When jacking up the front wheels, release the parking
brake and place wheel stoppers only behind the rear
wheels. When jacking up the rear wheels, place wheel
stoppers only in front of the front wheels.
(e) Do not work or leave the vehicle supported only by a jack. Be sure to support the vehicle with a safety stand.
(f) When jacking up only the front wheels or only the rear wheels, place wheel stoppers to both sides of the wheels that contact ground.
(g) When jacking down the vehicle with its front wheels jacked up, release t\
he parking brake and place wheel stoppers only in front of the rear wheels. When jacking down the v\
ehicle with its rear wheels
jacked up, place wheel stoppers only behind the front wheels.
http://vnx.su
Page 87 of 2234

010B9±11
±
INTRODUCTION TERMS
01±37
AVENSIS REPAIR MANUAL (RM1018E)
TERMS
ABBREVIATIONS USED IN THIS MANUAL
AbbreviationsMeaning
ABSAnti±Lock Brake System
A/CAir Conditioner
ACAlternating Current
ACCAccessory
ACISAcoustic Control Induction System
ACSDAutomatic Cold Start Device
A.D.D.Automatic Disconnecting Differential
A/FAir±Fuel Ratio
AHCActive Height Control Suspension
ALRAutomatic Locking Retractor
ALTAlternator
AMPAmplifier
ANTAntenna
Approx.Approximately
ASSYAssembly
A/T, ATMAutomatic Transmission (Transaxle)
AT FAutomatic Transmission Fluid
AUTOAutomatic
AUXAuxiliary
AV GAverage
AV SAdaptive Variable Suspension
B+Battery Voltage
BABrake Assist
BACSBoost Altitude Compensation System
BATBattery
BDCBottom Dead Center
B/LBi±Level
B/SBore±Stroke Ratio
BTDCBefore Top Dead Center
BVSVBimetallic Vacuum Switching Valve
CANController Area Network
CBCircuit Breaker
CCoCatalytic Converter For Oxidation
CDCompact Disc
CFCornering Force
CGCenter Of Gravity
CHChannel
CKDComplete Knock Down
COMB.Combination
CPECoupe
CPSCombustion Pressure Sensor
CPUCentral Processing Unit
CRSChild Restraint System
CTRCenter
C/VCheck Valve
CVControl Valve
CWCurb Weight
DCDirect Current
http://vnx.su
Page 88 of 2234

01±38
±
INTRODUCTION TERMS
AVENSIS REPAIR MANUAL (RM1018E) Abbreviations Meaning
DEFDefogger
DFLDeflector
DIFF.Differential
DIFF. LOCKDifferential Lock
D/INJDirect Injection
DLCData Link Connector
DLIDistributorless Ignition
DOHCDouble Overhead Camshaft
DPDash Pot
DSDead Soak
DSPDigital Signal Processor
DTCDiagnostic Trouble Code
DVDDigital Versatile Disc
EBDElectric Brake Force Distribution
ECAMEngine Control And Measurement System
ECDElectronic Controlled Diesel
ECDYEddy Current Dynamometer
ECTElectronic Control Transmission
ECUElectronic Control Unit
EDElectro±Deposited Coating
EDUElectronic Driving Unit
EDICElectric Diesel Injection Control
EFIElectronic Fuel Injection
E/GEngine
EGRExhaust Gas Recirculation
EGR±VMEGR±Vacuum Modulator
ELREmergency Locking Retractor
EMPSElectric Motor Power Steering
ENGEngine
ESAElectronic Spark Advance
ETCS±iElectronic Throttle Control System±intelligent
EVAPEvaporative Emission Control
EVPEvaporator
E±VRVElectric Vacuum Regulating Valve
EXExhaust
FEFuel Economy
FFFront±Engine Front±Wheel±Drive
F/GFuel Gauge
FIPGFormed In Place Gasket
FLFusible Link
F/PFuel Pump
FPUFuel Pressure Up
FrFront
F/WFlywheel
FW/DFlywheel Damper
FWDFront±Wheel±Drive
GASGasoline
GNDGround
GPSGlobal Positioning System
HACHigh Altitude Compensator
H/BHatchback
http://vnx.su
Page 90 of 2234

01±40
±
INTRODUCTION TERMS
AVENSIS REPAIR MANUAL (RM1018E) Abbreviations Meaning
OEMOriginal Equipment Manufacturing
OHCOverhead Camshaft
OHVOverhead Valve
OPTOption
ORVROn±board Refilling Vapor Recovery
O/SOversize
P & BVProportioning And Bypass Valve
PCSPower Control System
PCVPositive Crankcase Ventilation
PKBParking Brake
PPSProgressive Power Steering
PTCPositive Temperature Coefficient
PSPower Steering
PTOPower Take±Off
P/WPower Window
R & PRack And Pinion
RAMRandom Access Memory
R/BRelay Block
RBSRecirculating Ball Type Steering
R/FReinforcement
RFSRigid Front Suspension
RHRight±Hand
RHDRight±Hand Drive
RLYRelay
ROMRead Only Memory
RrRear
RRSRigid Rear Suspension
RWDRear±Wheel Drive
SDNSedan
SENSensor
SICSStarting Injection Control System
SOCState Of Charge
SOHCSingle Overhead Camshaft
SPECSpecification
SPISingle Point Injection
SRSSupplemental Restraint System
SSMSpecial Service Materials
SSTSpecial Service Tools
STDStandard
STJCold±Start Fuel Injection
SWSwitch
SYSSystem
T/ATransaxle
TACHTachometer
TBIThrottle Body Electronic Fuel Injection
TCTurbocharger
TCCSTOYOTA Computer±Controlled System
TCVTiming Control Valve
TDCTop Dead Center
TEMP.Temperature
TEMSTOYOTA Electronic Modulated Suspension
http://vnx.su
Page 100 of 2234

022KS±01
±
PREPARATION BRAKE
02±33
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE
PREPARATION
SST
09023±00100Union Nut Wrench 10 mmBRAKE FLUID
BRAKE MASTER CYLINDER
SUB±ASSY
FRONT BRAKE
REAR BRAKE
BRAKE BOOSTER ASSY(LHD)
BRAKE BOOSTER ASSY(RHD)
BRAKE ACTUATOR ASSY(W/ VSC)
BRAKE ACTUATOR ASSY(W/O VSC)
09023±38400Union Nut Wrench 14mmBRAKE FLUID
BRAKE MASTER CYLINDER
SUB±ASSY
FRONT BRAKE
REAR BRAKE
BRAKE BOOSTER ASSY(LHD)
BRAKE BOOSTER ASSY(RHD)
BRAKE ACTUATOR ASSY(W/ VSC)
09214±76011Crankshaft Pulley ReplacerSKID CONTROL SENSOR
09520±00031Rear Axle Shaft PullerSKID CONTROL SENSOR
(09520±00040)ShockerSKID CONTROL SENSOR
09521±00020Drive Shaft Boot Clamping ToolSKID CONTROL SENSOR
09550±60010Differential Side Bearing
ReplacerFRONT BRAKE
(09710±06051)ReplacerREAR BRAKE
09950±00020Bearing RemoverSKID CONTROL SENSOR
Recomended Tools
09042±00010Torx Socket T30STEERING SENSOR
http://vnx.su
Page 101 of 2234

02±34
±
PREPARATION BRAKE
AVENSIS REPAIR MANUAL (RM1018E)
Equipment
Micrometer
Dial indicator w/ magnetic base
Brake drum gauge
Slide calipers
Torque wrench
Lubricant
ItemCapacityClassification
Brake fluid±SAE J1704 or FMVSS No. 116 DOT4
http://vnx.su
Page 102 of 2234

022KZ±01
±
PREPARATION CLUTCH
02±43
AVENSIS REPAIR MANUAL (RM1018E)
CLUTCH
PREPARATION
SST
09023±00100Union Nut Wrench 10 mmCLUTCH ACCUMULATOR
ASSY(1CD±FTV)
CLUTCH RELEASE CYLINDER
ASSY(MTM)
CLUTCH MASTER CYLINDER
ASSY(MTM)
09301±00220Clutch Guide ToolCLUTCH UNIT(MTM)
09333±00013Universal Joint Bearing Remover
& ReplacerCLUTCH UNIT(MTM)
Recomended Tools
09040±00011Hexagon Wrench SetCLUTCH PEDAL SUB±ASSY(MTM)
Equipment
Torque wrench
Vernier calipers
Dial indicator with magnetic base
Vernier calipers
Lubricant
ItemCapacityClassification
Brake fluid±SAE J1704 or FMVSS No.116 DOT 4
http://vnx.su
Page 143 of 2234

022JT±01
±
PREPARATION PARKING BRAKE
02±35
AVENSIS REPAIR MANUAL (RM1018E)
PARKING BRAKE
PREPARATION
SST
09718±00010Shoe Hold Down Spring DriverPARKING BRAKE ASSY
PARKING BRAKE CABLE ASSY NO.3
Recomended Tools
09070±20010Moulding RemoverPARKING BRAKE CABLE ASSY NO.1
PARKING BRAKE LEVER SUB±ASSY
Equipment
Torque wrench
Slide calipers
http://vnx.su