flashing TOYOTA AVENSIS 2003 Service Repair Manual

B59092
Wire Harness SideDoor Control Receiver
73±16
±
THEFT DETERRENT & DOOR LOCK WIRELESS DOOR LOCK CONTROL SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
(g) Check the hazard warning lamps flashing function (answer±back). (1) When the LOCK switch is pressed, check that the hazard warning lamps flash once, simulta-neously with the locking of all the doors.
(2) When the UNLOCK switch is pressed once, check that the hazard warning lamps \
flash twice si- multaneously with the unlocking of all the doors.
(3) When the luggage door (back door) unlock switch is pressed once, check tha\
t the hazard warn- ing lamps flash twice simultaneously with the unlocking of the luggage door\
(back door).
2. CHECK DOOR CONTROL RECEIVER
(a) Disconnect the receiver connector.
(b) Check the voltage and resistance between the terminalsof the wire harness side connector and the body ground.
Standard:
Tester ConnectionConditionSpecified Condition
5 (+B) ± Body groundConstant10 to 14 V
1 (GROUND) ± Body groundConstantBelow 1

If the result is not as specified, there may be a malfunction on the wire \
harness side.
(c) Reconnect the connector and check the voltage between the terminal and b\
ody ground.
Standard:
Tester ConnectionConditionSpecified Condition
2 (RDA) ± Body groundNo key in ignition key cylinder, all doors closed
and each transmitter switch OFF ONBelow 1 V Approx. 6 to 7 V Below 1 V
If the result is not as specified, the receiver may have a malfunction.
http://vnx.su