parking brake TOYOTA AVENSIS 2011 Service Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2011, Model line: AVENSIS, Model: TOYOTA AVENSIS 2011Pages: 772, PDF Size: 34.43 MB
Page 648 of 772

648
5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
If you have a flat tire (vehicles with a spare tire for sedan)
Remove the flat tire and replace it with the spare provided.
Before jacking up the vehicle
Stop the vehicle on a hard, flat surface.
Set the parking brake.
Shift the shift lever to “P” (Multidrive or automatic transmis-
sion) or “R” (manual transmission).
Stop the engine.
Turn on the emergency flashers. (P. 604)
Location of the spare tire, jack and tools
Vehicles with a compact spare tire
Parking brake
release tool
Towing eyeletWheel nut wrench
Spare tire
Jack
Jack handle
Page 649 of 772

5
649 5-2. Steps to take in an emergency
When trouble arises
AVENSIS_EE (OM20B44E)
Vehicles with a standard spare tire
Parking brake
release toolTowing eyelet
Wheel nut wrench
Spare tire
Jack
Jack
handle
Page 660 of 772

660 5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
CAUTION
Speed limit when using the compact spare tire
Do not drive at speeds in excess of 80 km/h (50 mph) when a compact spare
tire is installed on the vehicle.
The compact spare tire is not designed for driving at high speeds. Failing to
observe this precaution may lead to an accident.
When the spare tire is installed
The vehicle speed may not be correctly detected, and the following systems
may not operate correctly:
ABS & brake assist
VSC
TRC
Navigation system (if equipped)
Toyota parking assist-sensor (if equipped)
Dynamic radar cruise control (if equipped)
Cruise control (if equipped)
PCS (if equipped)
LKA (if equipped)
AFS (if equipped)
Page 662 of 772

662
5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
If you have a flat tire (vehicles with a spare tire for wagon)
Remove the flat tire and replace it with the spare provided.
Before jacking up the vehicle
Stop the vehicle on a hard, flat surface.
Set the parking brake.
Shift the shift lever to “P” (Multidrive or automatic transmis-
sion) or “R” (manual transmission).
Stop the engine.
Turn on the emergency flashers. (P. 604)
Location of the spare tire, jack and tools
Vehicles with a compact spare tire
Spare tire
Jack handle
Rear auxiliary
box
Jack
Wheel nut
wrench
Parking brake
release tool
To w i n g
eyelet
Page 663 of 772

5
663 5-2. Steps to take in an emergency
When trouble arises
AVENSIS_EE (OM20B44E)
Vehicles with a standard spare tire
Spare tireJack handle
Rear auxiliary
boxJack
Wheel nut
wrench
Parking brake
release tool
Towing eyelet
Page 674 of 772

674 5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
CAUTION
Speed limit when using the compact spare tire
Do not drive at speeds in excess of 80 km/h (50 mph) when a compact spare
tire is installed on the vehicle.
The compact spare tire is not designed for driving at high speeds. Failing to
observe this precaution may lead to an accident.
When the spare tire is installed
The vehicle speed may not be correctly detected, and the following systems
may not operate correctly:
ABS & brake assist
VSC
TRC
Navigation system (if equipped)
Toyota parking assist-sensor (if equipped)
Dynamic radar cruise control (if equipped)
Cruise control (if equipped)
PCS (if equipped)
LKA (if equipped)
AFS (if equipped)
Page 676 of 772

676
5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
If you have a flat tire (vehicles without a spare tire)
Your vehicle is equipped with an emergency tire puncture repair kit.
A puncture caused by a nail or screw passing through the tire tread
can be repaired temporarily with the emergency tire puncture repair
kit.
Before repairing the vehicle
Stop the vehicle in a safe place on a hard, flat surface.
Set the parking brake.
Shift the lever to “P” (Multidrive or automatic transmission) or
“N” (manual transmission).
Stop the engine.
Turn on the emergency flashers. (P. 604)
Location of the emergency tire puncture repair kit, jack and
tools
Sedan
*: Use of the jack. (if equipped) (P. 652)
Jack*
Emergency tire
puncture repair kit
Jack
handle
*
Wheel nut
wrench
Parking brake
release tool
To w i n g
eyelet
Page 677 of 772

5
677 5-2. Steps to take in an emergency
When trouble arises
AVENSIS_EE (OM20B44E)
Wagon
*: Use of the jack. (if equipped) (P. 666)
Contents
Jack handle*
Emergency
tire puncture
repair kit
Wheel nut
wrenchTowing eyelet
Parking brake
release tool
Jack*
Rear auxiliary
box
Sealant
Injection
hose
Va l v e
core tool
Va l v e c o r e
(spare)
CompressorStickers
Page 691 of 772

5
691 5-2. Steps to take in an emergency
When trouble arises
AVENSIS_EE (OM20B44E)
Emergency start function (Multidrive or automatic transmission
vehicles with smart entry & start system)
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the “ENGINE START STOP”
switch is functioning normally.
Set the parking brake.
Put the shift lever in “P”.
Set the “ENGINE START STOP” switch to ACCESSORY
mode.
Push and hold the “ENGINE START STOP” switch about 15
seconds while depressing the brake pedal firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by any authorized
Toyota dealer or repairer, or another duty qualified and equipped pro-
fessional.
STEP1
STEP2
STEP3
STEP4
Page 692 of 772

692
5-2. Steps to take in an emergency
AVENSIS_EE (OM20B44E)
If the shift lever cannot be shifted from “P”
For vehicles with Multidrive or automatic transmission: If the shift
lever cannot be shifted with your foot on the brake, there may be a
problem with the shift lock system (a system to prevent accidental
operation of the shift lever). Have the vehicle inspected by any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional, immediately.
The following steps may be used as an emergency measure to
ensure that the shift lever can be shifted.
Set the parking brake.
Vehicles with smart entry & start system: Turn the “ENGINE
START STOP” switch to ACCESSORY mode.
Vehicles without smart entry & start system: Turn the
engine switch to the “ACC” position.
Depress the brake pedal.
Press the “SHIFT LOCK” but-
ton.
The shift lever can be shifted
while the button is pressed.
STEP1
STEP2
STEP3
STEP4