309 2-4. Using other driving systems
2
When driving
AVENSIS_EE (OM20B44E)Rear view monitor guide lines
Guide lines are displayed on the screen.
Guide lines shown differ from those shown on the actual screen.
Vehicle width extension guide line (blue)
These lines indicate the estimated vehicle width extension.
Distance guide line (blue)
This line indicates a position on the ground about 1 m (3 ft.) behind on the
ground of the rear bumper of your vehicle.
Distance guide line (red)
This line indicates a position on the ground about 0.5 m (1.5 ft.) behind on
the ground of the rear bumper of your vehicle.
Vehicle center guide lines (blue)
These lines indicate the estimated vehicle center on the ground.
558
4-3. Do-it-yourself maintenance
AVENSIS_EE (OM20B44E)
Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause loss of
handling control.
Wheel selection
When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and inset
*.
Replacement wheels are available at any authorized Toyota
dealer or repairer, or another duly qualified and equipped profes-
sional.
*: Conventionally referred to as “offset”.
Toyota does not recommend using:
Wheels of different sizes or types
Used wheels
Bent wheels that have been straightened
Aluminum wheel precautions
Use only Toyota wheel nuts and wrenches designed for use
with your aluminum wheels.
When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1600 km (1000 miles).
Be careful not to damage the aluminum wheels when using
tire chains.
Use only Toyota genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.
720
AVENSIS_EE (OM20B44E)
6-1. Specifications
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall lengthSedan 4710 mm (185.4 in.)
Wagon 4780 mm (188.2 in.)
Overall width 1810 mm (71.2 in.)
Overall height*11480 mm (58.2 in.)
Wheelbase 2700 mm (106.3 in.)
Tread
Front1560 mm (61.4 in.)*2
1550 mm (61.0 in.)*3
Rear1550 mm (61.0 in.)*2
1540 mm (60.6 in.)*3
Gross vehicle
mass
1ZR-FAE engine 1950 kg (4298.9 lb.)
2ZR-FAE engine2020 kg (4453.3 lb.)*4
2000 kg (4409.2 lb.)*5
3ZR-FAE engine2050 kg (4519.4 lb.)*4
2020 kg (4453.3 lb.)*5
1AD-FTV engine2100 kg (4629.7 lb.)
2130 kg (4695.8 lb.)*6
2AD-FTV and
2AD-FHV engines2140 kg (4717.8 lb.)
Maximum permis-
sible axle capacityFront1215 kg (2678.6 lb.)*7
1250 kg (2755.7 lb.)*8
Rear1135 kg (2502.2 lb.)*7
1215 kg (2678.6 lb.)*8
