ECO mode TOYOTA C-HR 2018 1.G Quick Reference Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2018, Model line: C-HR, Model: TOYOTA C-HR 2018 1.GPages: 48, PDF Size: 1.77 MB
Page 7 of 48
5
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Master warning2
Low fuel level warning
Cruise control indicator/
Cruise control SET indicator
Turn signal indicator
Tire Pressure Warning2
Vehicle Stability Control
(VSC) OFF indicator2
Malfunction/Check Engine
indicator
Electric power steering
system warning
Low engine oil pressure
warning
High engine coolant
temperature warning
Smart key system1
ECO mode indicator
Eco Driving Indicator
SPORT mode indicator
Parking brake indicator
Driver/front passenger seat
belt reminder indicator
SRS airbag warning2
1 If equipped. 2 If indicator does not turn off within a few seconds of starting engine, there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
Headlight low/
high beam indicators
Pre-Collision System (PCS)
warning light2
Rear passenger seat belt reminder
indicator
Lane Departure Alert (LDA) indicator
Slip indicator indicator2
Security indicator
Low outside temperature indicator
Dynamic Radar Cruise Control
(DRCC) indicator
Rear Cross Traffic Alert (RCTA)
1
Page 12 of 48
10
Continuously variable transmission
CHANGING GEAR STEPS IN THE M POSITION
7-SPEED SEQUENTIAL SHIFTMATIC MODE
1 8 I F O T I J G U J O H U I F M F W F S C F U X F F O 1 1 B S L
B O E % % S J W F
N B L F T V S F U I B U U I F W F I J D M F
is completely stopped. 8 I J M F F O H J O F T X J U D I J T J O U I F i 0 / w Q P T J U J P O X J U I P V U 4 N B S U , F Z
P S i * ( / * 5 * 0 / 0 / w
N P E F X J U I 4 N B S U , F Z
E F Q S F T T C S B L F B O E Q V T I T I J G U M F W F S C V U U P O U P T I J G U J O U P H F B S
Shift the shift lever to “M” position from “D” position.
+: Upshifting
-: Downshifting
Downshifting increases power going uphill, or provides engine braking downhill. For
best fuel economy during normal driving conditions, always drive with the shift lever
in the “D” position.
Refer to the Owner’s Manual for more details.
Park1
Reverse
Neutral
Drive
“M” position*
P
R
N
D
M
* For more information about
changing gears in the “M”
position, refer to your Owner’s
Manual.
FEATURES & OPERATIONS
Tilt & telescopic steering wheel
NOTE: Do not attempt to adjust while the vehicle is in motion. Lock release leverAngle
Length
Hold wheel, push lever down, set
angle and length, and return lever.
+
-
Page 17 of 48
15
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Multi-Information Display (MID)
Steering wheel switchesMulti-Information Display (MID)
Previous screen
Enter/set
Select
Use the the steering wheel meter control switches to operate the MID.
Use the the steering wheel meter control switches to operate the MID. See
above.
Drive modes
1 S F T T T U F F S J O H X I F F M T X J U D I F T i” to find and select in the MID.
1 S F T T T U F F S J O H X I F F M T X J U D I F T “
” switches and select “Drive Mode” in the MID.
4 F M F D U B E S J W J O H N P E F
“NORMAL” - for city driving.
“SPORT” - for roads with many curves needing improved driving response.
“ECO” - for improved fuel economy and energy saving controlled air/heating.
5 I F i 4 1 0 3 5 w B O E i & $ 0 w J O E J D B U P S T E J T Q M B Z J O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
Note: Operation of the LDA system and setting adjustments continues in the same
condition regardless of Ignition cycle until changed by the driver or the system is reset.
Drive information - displays various drive data.
Settings display - change meter display and operation settings of some
vehicle functions.
Warning message display - Displays warning messages and measures
to take when malfunctions are detected.
Driving assist system information
E J T Q M B Z T P Q F S B U J P O B M T U B U V T G P S - B O F % F Q B S U V S F " M F S U - % "
B O E % Z O B N J D
3 B E B S $ S V J T F $ P O U S P M % 3 $ $
X J U I G V M M T Q F F E S B O H F
Page 18 of 48
16
FEATURES & OPERATIONS
Seat heaters (if equipped)
Air conditioning/heating
Driver seatFront
passenger seat
High
Medium
Low
AUTOMATIC AIR CONDITIONING
Dual temperature control ECO mode switch
1
Air conditioning Temperature display
Recirculate cabin air
Climate
control OFF Outside rearview mirror*/
Rear defoggerFan speed
Windshield
airflow/defogger
Automatic climate control ON
Adjusting the temperature setting will
cause the airflow vents, air intake and
fan to adjust automatically.Airflow vent
In “
” or “” mode, use outside
air (“” indicator OFF) to reduce
window fogging.
Adjusters
UP: Increase temperature/change mode.
DOWN: Decrease temperature/change mode
* Defoggers automatically turn off after a period of time.
1 Air conditioning feature that helps lower fuel consumption by controlling and prioritizing functions like
reducing fan speed, etc.
t 4 N B S U , F Z T Z T U F N
F O H J O F T X J U D I N V T U C F J O i * ( / * 5 * 0 / 0 / w N P E F
Page 23 of 48
21
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
AUDIO: INSTALLING THE AHA®1 APPLICATION
AUDIO: AHA®1
AUDIO: SWITCHING TO AHA®1 MODE
Aha®1 offers more than 100,000 stations of audio
content from Internet music, news, audiobooks,
personalized restaurant recommendations,
weather and hotel searches, Facebook
® and
Twitter® newsfeeds and much more.
1. Download Aha
®1 application onto your smartphone. For an iPhone®, use
iTunes® App Store. For an Android® phone, use Google™ Play.
2. Follow the instructions to set up your Aha
®1 account on your smartphone.
3. Optional: Link your Associated Accounts in the Settings menu to enable certain
personalized stations.
4. Aha
®1 provides content suggestions from a wide range of featured
categories, but you can also add many presets via the smartphone app or the
Aha
®1 X F C T J U F I U U Q B I B S B E J P D P N T U B U J P O
1. Press the “MEDIA” button.
t The audio system displays the current source screen or displays the source
selection screen.
2. On the current source screen, touch the “Source” or press the “MEDIA” button to
display the audio source selection screen.
3. Touch “aha”*.
t It will take time for the “aha” button to be available during the system startup.
t If both iPhone
® and Android® phone are connected, the iPhone® will be
used for Aha® operation. t For more information about Aha
®1, refer to http://www.aharadio.com.
1Aha, Aha Radio and the Aha and Aha Radio logos are either the trademarks or the registered trademarks of Harman International
Industries, Incorporated.
Be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times.
INFORMATION
INFORMATION
Page 24 of 48
22
FEATURES & OPERATIONS
1Android, Google Play, and other marks are trademarks of Google Inc.2iPhone® not included. iPhone and iTunes are registered trademarks of Apple Inc.
Be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times.
In order to use the Aha® audio system, it is necessary to connect an
iPhone® or Android® phone with the Aha® application installed.
CONNECTING AN ANDROID
©1 PHONE
1. Switch to Aha® mode.
2. Touch “Yes”.
3. Connected Android
® device will be
displayed.
s If there are Android
®1 phones in paired device list, touch one to connect it for Phone and
Audio Player.
s The USB/AUX port is located on the instrument panel, or near the shift knob, etc. The
actual design and port position will differ depending on the vehicle. For details, refer to
vehicle “Owner’s Manual”. CONNECTING AN iPHONE
®2
1. Open the cover of the USB/AUX port and
connect an iPhone using an iPhone cable to
the USB port.
2. Open the Aha application on your phone
and select Aha audio source on the head unit
NOTE: In order to use the Bluetooth® audio system for Aha®, it is necessary to pair an
Android® phone and connect it for Phone and Audio Player. To use Aha® you must have
a data plan for your smartphone (minimum 2GB plan recommended), access to a Wi-Fi
network, or data connectivity through a portable hotspot device.
NOTE: iPhones must use the USB cable. To use Aha®
you must have a data plan for your
smartphone (minimum 2GB plan recommended), access to a Wi-Fi network, or data
connectivity through a portable hotspot device.
NOTE: iPhone®2 cables are not provided with your vehicle. Please use the cables that were
provided with your phone.
AUDIO: CONNECTING FOR AHA®
AUDIO: CONNECTING A PHONE
Page 35 of 48
33
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding
vehicle is traveling at a lower speed. This mode is always selected first when the
cruise control button is depressed. Constant speed cruise control mode is also
available. Full-Speed Range DRCC is designed to function at speeds between 0 to
approximately 110 MPH and is intended for highway use.
Full-Speed Range Dynamic Radar Cruise
Control (DRCC)
TURNING SYSTEM ON/OFF
(1)
1 V T I U I F 0 / 0 ' ' C V U U P O P O D F U P U V S O 0 / 5 I F i 3 " % " 3 3 & " % : w B O E i
”
indicator will come on. Push once again to turn it OFF.
Note: If Full-Speed Range DRCC is turned off and you hold the ON-OFF button
for at least 1.5 seconds, the system switches to constant speed control mode
and displays “
”.
5 H I H U W R \ R X U 7 R \ R W D 2 Z Q H U
Page 37 of 48
35
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
SWITCHING TO CONSTANT SPEED CONTROL MODE
If you are already using DRCC “”, push ON-OFF button to turn the system off
first, then push and hold ON-OFF button for at least 1.5 seconds to switch.
Note: When the engine is turned off, it will automatically default to DRCC. To
adjust speed, refer to figures (2) and (3) on page 30.
1.5 seconds
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
O F D F T T B S Z
U I F T Z T U F N B Q Q M J F T U I F C S B L F T U I F T U P Q M J H I U T X J M M D P N F P O B U U I J T
U J N F
5 I F T Z T U F N X J M M S F T Q P O E U P D I B O H F T J O U I F T Q F F E P G U I F W F I J D M F B I F B E
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.
Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Note: When your vehicle is too close to a vehicle ahead, and sufficient
automatic deceleration via the cruise control is not possible, the display will
flash and the buzzer will sound to alert the driver. An example of this would be
if another driver cuts in front of you while you are following a vehicle. Depress
the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
(1) (2) (3)
" % + 6 4 5 * / ( % 3 $ $ % * 4 5 " / $ & $ 0 / 5 * / 6 & %
Page 43 of 48
41
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Floor mat installation
4 . " 3 5 4 5 0 1 5 & $ ) / 0 - 0 ( : 4 4 5
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
t Only use Toyota floor mats designed for your specific model.
t 6 T F P O M Z P O F G M P P S N B U B U B U J N F
V T J O H U I F S F U B J O J O H I P P L T U P L F F Q U I F N B U J O
place.
t * O T U B M M G M P P S N B U T S J H I U T J E F V Q Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Always align the marks