flat tire TOYOTA C-HR 2018 1.G Quick Reference Guide

38
SAFETY & EMERGENCY FEATURES
Tire Pressure Monitoring (warning) System (TPMS)
After adjusting tire pressures, or after tires have been rotated or replaced, turn the
ignition switch to “ON” and follow the steps above to reset the TPMS.
Refer to the load label on the door jamb or the Toyota Owner’s Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.

1SFTTTUFFSJOHXIFFMTXJUDIFTi” to find and select “” from the MID.

1SFTTTUFFSJOHXIFFMTXJUDIFTi
” to select “Vehicle Settings” and then press
“
” to display menu.

1SFTTTUFFSJOHXIFFMTXJUDIFTi
” to select “ Setup” and then press “.”
You can press “
” to go back to the menu.
When initialization is complete, a message displays on MID and indicator blinks
three times on the gauge.