steering wheel TOYOTA CAMRY 2000 Service User Guide

88CHASSISÐSTEERING
2. Energy Absorbing Mechanism
Construction
The energy absorbing mechanism of the steering
column consists of a lower bracket, breakaway
bracket, and energy absorbing plate.
The breakaway bracket is attached to the instrument
panel reinforcement vial the capsule and energy
absorbing plate.
The steering column and the steering gear box are
connected with an elastic intermediate shaft.
Operation
The collision is transmitted to the steering wheel, and the lower bracket and the breakaway breacket will become
detached from each other, thus moving the entire unit forward. At the same time, the energy absorbingt plate becomes
deformed to absorb the energy of the impact.

Energy Absorbing Plate

111 BODY ELECTRICALÐACCESSORIES
 SRS AIRBAG
1. General
The SRS (Supplemental Restraint System) airbag is designed to help lessening the shock to the driver and front
passenger as a supplement to the seat belt. In a collision, the aribag sensor detects the shock and if the front±to±rear
shock is greater than a specified value, the airbags stored in the steering wheel pad for the driver and above the glove
box for the front passenger inflate instantly to help reducing the likelihood of the driver's or front passenger's head
and chest directly hitting the steering wheel or instrument panel.
As in the '96 Avalon, a 1±sensor type airbag system is used, in chich the detection of deceleration during a collision
is accomplished by the airbag sensor enclosed in the airbag snesor assembly.
The airbag system is controlled by the airbag sensor assembly. It has a self±diagnosis function. When it detects a
system malfunction, it lights up the SRS warning light on the combination meter to alert the driver.
The basic construction and operation are the same as in teh '96 Avalon. However, 2 types of the inflator for front
passenger have been adopted in the new Camry: TRW made and Morton made. Also, the construction of airbag sensor
assembly has been changed.

System Diagram
The activation processes of the SRS airbag is as illustrated below.

120APPENDIX
MAJOR TECHNICAL SPECIFICATIONS
Item AreaU.S.A..
.Body Type4±Door SedanVehicle GradeCELEXLEModel CodeSXV20L±CEMDKASXV20L±CEPDKASXV20L±A(C)EPNKASXV20L±A(C)EPGKALength mm (in.)4785(188.4)uuu
OverallWidth mm (in.)1780(70.1)uuuOverallHeight* mm (in.)1415 (55.7)uuuWheel Base mm (in.)2670(105.1)uuu
TreadFront mm (in.)1545 (60.8)uuuTreadRear mm (in.)1520 (59.8)uuu
Effective Head RoomFront mm (in.)1105 (43.5)uuuEffective Head RoomRear mm (in.)902 (35.5)uuu
sEffective Leg RoomFront mm (in.)980 (38.6)uuu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uuu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uuu
icle WShoulder RoomRear mm (in.)1425 (56.1)uuu
VehicOverhangFront mm (in.)970 (38.2)uuu
s & VeOverhangRear mm (in.)1140 (44.9)uuu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)uuu
mensioAngle of Approach degrees175uuu
DimeAngle of Departure degrees175uuu
ajor DFront kg (lb)820 (1808)840 (11852)860 (1896)*1, 865 (1970)*2865 (1907)*1, 870 (1918)*2
MajoCurb WeightRear kg (lb)530 (1168)u530 (1168)*1, 535 (1179)*2
530 (1168)*1, 535 (1179)*2
MCurb WeightTotal kg (lb)1350 (2976)1370 (3020)1390 (3064)*1, 1400 (3086)*2
1395 (3075)*1, 1405 (3097)*2
Front kg (lb)980 (2161)uuuGross Vehicle WeightRear kg (lb)870 (1918)uuuGross Vehicle WeightTotal kg (lb)1850 (4079)uuuFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuuMax. Speed km/h (mph)180 (112)uuuMax. Cruising Speed km/h (mph)ÐÐÐÐ
Acceleration0 to 100 km/h sec.ÐÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐÐ
mance1st Gear km/h (mph)52 (32)69 (43)uu
rform
a
Max Permissible Speed2nd Gear km/h (mph)93 (58)125 (78)uuPerfoMax. Permissible Speed3rd Gear km/h (mph)147 (91)ÐÐÐP4the Gear km/h (mph)ÐÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)uuuTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)uuuEngine Type5S±FEuuuValve Mechanism16±Valve, DOHCuuuBore x Stroke mm (in.)87.0x91.0(3.43x3.58)uuu
eDisplacement cm3 (cu. in..)2164 (132.0)uuu
ngineCompression Ratio9.5 : 1uuuEngCarburetor TypeSFIuuuResearch Octane No. RON91uuuMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200),97/5200(130@5200)*3uuuMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400,197/4400(145@44003uuu
alBattery Capacity (5HR) Voltage & Amp. hr.12±52, 12±48*4uuu
ginectric a lGenerator Output Watts960uuuEnginElectrStarter Output kW1.4uuuClutch TypeDry, Single PlateÐÐÐTransmission TypeS51A140Euu
uIn First3.5382.810uuIn Second1.9601.549uu
Transmission Gear RatioIn Third1.2501.000uuTransmission Gear RatioIn Fourth0.9450.706uuIn Fifth0.731ÐÐÐIn Reverse3.1532.296uuCounter Gear RatioÐ0.945uuDifferential Gear Ratio (Final)3.944uuu
ssisBrake TypeFrontVentilated Discuuu
ChassiBrake TypeRearL.T. DrumuuuChParking Brake TypeDrumuuuBrake Booster Type and Style in.Tandem 8º + 9ºuTandem 8.5º + 8.5º*1,
8º
+
9º*2uProportioning Valve TypeDual±P Valveuuu
Suspension TypeFrontMacPherson StrutuuuSuspension TypeRearMacPherson Strutuuu
Stabilizer BarFrontSTDuuuStabilizer BarRearSTDuuuSteering Gear TypeRack & PinionuuuSteering Gear Ratio (Overall)17.4 : 1uuuPower Steering TypeIntegral Typeuuu
* : Unladen Vehicle, *1 : Produced by TCM, *2 : Produced by TMM, *3 : California Specification Model, *4
: Without Cold Area Specification Model

122APPENDIX
Item AreaCanadaBody Type4±Door SedanVehicle GradeLECELEModel CodeSXV20L±CEPNKKMCV20L±CEPDKKMCV20L±CEPNKKLength mm (in.)4785 (188.4)uu
OverallWidth mm (in.)1780 (70.1)uuOverallHeight* mm (in.)1415 (55.7)1420 (55.9)uWheel Base mm (in.)2670 (105.1)uu
TreadFront mm (in.)1545 (60.8)uuTreadRear mm (in.)1520 (59.8)uu
Effective Head RoomFront mm (in.)1105 (43.5)uuEffective Head RoomRear mm (in.)902 (35.5)uu
sEffective Leg RoomFront mm (in.)980 (38.6)uu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uu
icle WShoulder RoomRear mm (in.)1425 (56.1)uu
VehicOverhangFront mm (in.)970 (38.2)uu
s & VeOverhangRear mm (in.)1140 (44.9)uu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)148 (5.8)u
mensioAngle of Approach degrees175uu
DimeAngle of Departure degrees175uu
ajor DFront kg (lb)865 (1907)890 (1962)920 (2028)MajoCurb WeightRear kg (lb)535 (1179)540 (1191)uMCurb WeightTotal kg (lb)1400 (3086)1430 (3153)1460 (3219)Front kg (lb)980 (2161)1035 (2282)uGross Vehicle WeightRear kg (lb)870 (1918)875 (1929)uGross Vehicle WeightTotal kg (lb)1850 (4079)1910 (4211)uFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuMax. Speed km/h (mph)180 (112)210 (130)uMax. Cruising Speed km/h (mph)ÐÐu
Acceleration0 to 100 km/h sec.ÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐ
mance1st Gear km/h (mph)69 (43)70 (43)u
rform
a
Max Permissible Speed2nd Gear km/h (mph)125 (78)127 (79)uPerfoMax. Permissible Speed3rd Gear km/h (mph)ÐÐÐP4th Gear km/h (mph)ÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)11.9 (39.0)uTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)11.4 (37.4)uEngine Type5S±FE1MZ±FEuValve Mechanism16±Valve, DOHC24±Valve, DOHCuBore x Stroke mm (in.)87.0x91.0 (3.43x3.58)87.5x83.0 (3.44x3.27)u
eDisplacement cm3 (cu. in..)2164 (132.0)2995 (182.7)u
ngineCompression Ratio9.5 : 110.5:1uEngCarburetor TypeSFIuuResearch Octane No. RON9191 or higheruMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200)145/5200 (194@5200)uMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400)283/4400 (209@4400)u
alBattery Capacity (5HR) Voltage & Amp. hr.12±52uu
ginectric a lGenerator Output Watts960uuEnginElectrStarter Output kW1.4uuClutch TypeÐÐÐTransmission TypeA140EA541EuIn First2.810uuIn Second1.549uu
Transmission Gear RatioIn Third1.000uuTransmission Gear RatioIn Fourth0.7060.375uIn FifthÐÐÐIn Reverse2.296uuCounter Gear Ratio0.945uuDifferential Gear Ratio (Final)3.9443.933u
ssisBrake TypeFrontVentilated Discuu
ChassiBrake TypeRearL.T. DrumSolid DiscuChParking Brake TypeDrumuuBrake Booster Type and Style in.Tandem 8º + 9ºuuProportioning Valve TypeDual±P Valveuu
Suspension TypeFrontMacPherson StrutuuSuspension TypeRearMacPherson Strutuu
Stabilizer BarFrontSTDuuStabilizer BarRearSTDuuSteering Gear TypeRack & PinionuuSteering Gear Ratio (Overall)17.4 : 1uuPower Steering TypeIntegral Typeuu
* : Unladen Vehicle

Airbag Sensor Assembly Steering Wheel PadFront Passenger Airbag Assembly Spiral Cable
HANDLING PRECAUTIONS ON RELATED COMPONENTS
1. SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Locations of SRS Components
Servicing vehicle with a Supplemental Restraint System (referred to as the SRS in the remainder of this
manual) installed.
When handling SRS components (removal, installation or inspection, etc.), always follow the directions
given in the repair manual for the relevant model year to prevent the occurrence of accidents and airbag
malfunction.
Also take the following precautions when repairing the body:

Work must be started after 90 seconds or longer from the time the ignition switch is set to the LOCK
position and the negative (±) terminal cable is disconnected from the battery.
(The airbag system is equipped with a back±up power source so that if work is started within 90 sec-
onds of disconnecting the negative (±) terminal cable of the battery, the airbag may be deployed.)
When the negative (±) terminal cable is disconnected from the battery, memory of the clock and audio
systems will be cancelled. So before starting work, make a record of the contents memorized by each
memory system. Then when work is finished, reset the clock and audio systems as before.
When the vehicle has tilt and telescopic steering, power seat, outside rear view mirror and power shoul-
der belt anchorage, which are all equipped with memory function, it is not possible to make a record of
the memory contents. So when the operation is finished, it will be necessary to explain this fact to the
customer, and request the customer to adjust the features and reset the memory.

When using electric welding, first disconnect the SRS connector (yellow color and 2 pins) under the
steering column near the combination switch connector on the glove compartment finish plate and
lower the front scuff plate before starting work.
INTRODUCTIONIN-6

Component to be alignedSection of repair manual
for relevant model year
Front Wheels
Suspension and Axle (SA) section
Rear Wheels
Suspension and Axle (SA) section

Before repairing the body, remove the SRS parts if, during repair, shocks are likely to be applied to
the sensors due to vibrations of the body or direct tapping with tools or other parts.

Do not expose the SRS parts directly to hot air or flames
NOTICE:
1) The maximum ambient temperature tolerance is 120
°C (248°F) for the front airbag sensor,
105
°C (221°F) for the center airbag sensor assembly and 93°C (200°F) for the steering wheel
pad, and front passenger airbag assembly. If it is possible that the ambient temperature may
reach or exceed the temperature limit, remove the sensors and the steering wheel pad from the
vehicle or protect them with a hot insulation material before staring work.
2) Prior to welding, remove adjacent, SRS parts form tire vehicle or protect them with fire±proof
covers.

If the vehicle is damaged, visually inspect for damage to the steering wheel pad using the inspection
procedures described in section RS of the repair manual for the relevant model year.

When removing or handling the steering wheel pad, and front passenger airbag assembly keep the
pad upper surface facing upward. Also, lock the lock lever of the twin lock type connector at the rear
of the pad and take care not to damage the connector.
(Storing the pad or front passenger airbag assembly with its metallic surface up may lead to a seri-
ous accident if the airbag inflates for some reason.)

Store the steering wheel pad and the front passenger airbag assembly where the ambient tempera-
ture remains below 93°C (200°F), without high humidity and away from electrical noise.

Be careful not to let painting materials contact the SRS parts.

Information labels are attached to the periphery of the SRS components. Follow the NOTICES.

Store the airbag assembly where the ambient temperature remains below 93°C (200°F), without
high humidity and away from electrical noise.
2. BRAKE SYSTEM
The brake system is one of the most important safety components. Always follow the directions and
notes given in section BR of the repair manual for the relevant model year when handling brake sys-
tem parts.
NOTICE: When repairing the brake master cylinder or TRAC system, bleed the air out of the TRAC
system.
3. DRIVE TRAIN AND CHASSIS
The drive train and chassis are components that can have great effects on the running performance
and vibration resistance of the vehicle. After installing components in the sections listed in the table
below, perform alignments to ensure correct mounting angles and dimensions. Particularly accurate
repair of the body must also be done to ensure correct alignment.
HINT: Correct procedures and special tools are required for alignment. Always follow the directions
given in the repair manual for the relevant model year during alignment and section DI of this manual.
INTRODUCTIONIN-7

ABS Antilock Brake System
A/C Air Conditioner
assy assembly
ECT Electronic Controlled Transmission
ECU Electronic Control Unit
e.g. Exempli Gratia (for Example)
Ex. Except
FWD Front Wheel Drive Vehicles
4WD Four Wheel Drive Vehicles
in. inch
LH Left±hand
LHD Left±hand Drive
MIG Metal Inert Gas
M/Y Model Year
PPS Progressive Power Steering
RH Right±hand
RHD Right±hand Drive
SRS Supplemental Restraint System
w/ with
w/o without
ABBREVIATIONS USED IN THIS MANUAL
For convenience, the following abbreviations are used in this
manual.
INTRODUCTIONIN-20

CAMRY ± MODEL CODE
SXV20 : With 5S-FE Engine
MCV20 : With 1MZ-FE Engine
D: CE
N: LE
G: XLE M : 5-Speed Manual, Floor
P : 4-Speed Automatic, Floor
E : 4-Door Sedan A : Camry (Produced by TMC*
1)
C : Camry (Produced by TMMK*2)
STEERING WHEEL POSITION
MCV20 L ± C E P G K A
1234567
1BASIC MODEL CODE5
7GEARSHIFT TYPE
ENGINE SPECIFICATION
K : DOHC and SFI MODEL NAME
2
3L : Left-Hand Drive
BODY TYPE4
6GRADE
8DESTINATION
A : U.S.A.
K : Canada
8
4
MODEL CODE
*1: TMC (Toyota Motor Corporation)
*
2: TMMK (Toyota Motor Manufacturing Kentucky, Inc.)

APPENDIX ± CAMRY
ItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Speed
Turning Diameter
(Outside Front)0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
U.S.A.
CE
LE 4-Door Sedan
XLE
148

CAMRY
SXV20L-CEMDKA SXV20L-CEPDKA SXV20L-A(C)EPNKA SXV20L-A(C)EPGKA
4785 (188.4)



1780 (70.1)



1415 (55.7)



2670 (105.1)



1545 (60.8)



1520 (59.8)



980 (38.6), 950 (37.4)*
1



940 (37.0), 914 (36.0)*1



1102 (43.4)



901 (35.5)



1427 (56.2)



1425 (56.1)



970 (38.2)



1140 (44.9)



130 (5.1)



16



16



810 (1786) 835 (1841) 865 (1907)*
2, 870 (1918)*3

550 (1213) 545 (1202) 535 (1179)*2, 545 (1202)*3540 (1191)*2, 550 (1213)*3
1360 (2999) 1380 (3043) 1400 (3086)*2, 1415 (3120)*31405 (3098)*2, 1420 (3131)*3
995 (2195)



900 (1985)



1895 (4180)



70 (18.5, 15.4)



0.399 (14.1)



180 (112)



ÐÐÐÐ
ÐÐÐÐ
ÐÐÐÐ
52 (32) 69 (43)


93 (58) 125 (78)


147 (91) Ð Ð Ð
ÐÐÐÐ
115 (37.7)



11.0 (36.1)



5S-FE



16-Valve, DOHC



87.0 x 91.0 (3.43 x 3.58)



2164 (132.0)



9.5 : 1



SFI



91



99 / 5200(133@5200),97 / 5200(130@5200)*4


199 / 4400(147@4400),197 / 4400(145@4400)*4



12 ± 55, 12 ± 48*5



960



1.4



Dry, Single Plate Ð Ð Ð
S51 A140E


3.538 2.810


1.960 1.549


1.250 1.000


0.945 0.706


0.731 Ð Ð Ð
3.153 2.296


Ð 0.945


3.944



Ventilated Disc



L.T. Drum



Drum



Tandem 8º + 9º
Tandem 8.5º + 8.5º*
2, 8º + 9º*3

Dual-P Valve



MacPherson Strut



MacPherson Strut



STD



STD



Rack and Pinion



17.4 : 1



Integral Type



*: Unladed Vehicle *
3: Produced by TMMK
*1: With Moor Roof *4: California Specification Model
*2: Produced by TMC *5: Without Cold Area Specification Model

APPENDIX ± CAMRY
ItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Speed
Turning Diameter
(Outside Front)0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
Canada
LE
XLE 4-Door Sedan
CE
150
SXV20L-A(C)PNKK MCV20L-CEPDKK MCV20L-A(C)EPGKK
4785 (188.4)


1780 (70.1)


1415 (55.7) 1420 (55.9)

2670 (105.1)


1545 (60.8)


1520 (59.8)


980 (38.6), 950 (37.4)*
1


940 (37.0), 914 (36.0)*1


1102 (43.4)


901 (35.5)


1427 (56.2)


1425 (56.1)


970 (38.2)


1140 (44.9)


130 (5.1) 135 (5.3)

16


16


865 (1907)*
2, 870 (1918)*3865 (1907) 920 (2028)*2, 925 (2039)*3
535 (1179)*2, 545 (1202)*3550 (1213) 540 (1191)*2, 550 (1213)*3
1400 (3086)*2, 1415 (3120)*31415 (3120) 1460 (3219)*2, 1475 (32.52)*3
995 (2195) 1040 (2290)

900 (1985)


1895 (4180) 1940 (4275)

70 (18.5, 15.4)


0.399 (14.1)


180 (112) 210 (130)

ÐÐ

ÐÐÐ
ÐÐÐ
69 (43) 70 (43)

125 (78) 127 (79)

ÐÐÐ
ÐÐÐ
11.5 (37.7) 11.9 (39.0)

11.0 (36.1) 11.4 (37.4)

5S-FE 1MZ-FE

16-Valve, DOHC 24-Valve, DOHC

87.0 x 91.0 (3.43 x 3.58) 87.5 x 83.0 (3.44 x 3.27)

2164 (132.0) 2995 (182.7)

9.5 : 1 10.5 : 1

SFI


91 91 or higher

99 / 5200 (133@5200) 145 / 5200 (194@5200)

199 / 4400 (147@4400) 283 / 4400 (209@4400)

12 ± 55


960


1.4


ÐÐÐ
A140E A541E

2.810


1.549


1.000


0.706 0.735

ÐÐÐ
2.296


0.945


3.944 3.933

Ventilated Disc


L.T. Drum Solid Disc

Drum


Tandem 8.5º + 8.5º*2, 8º + 9º*3Tandem 8º + 9ºTandem 8.5º + 8.5º*2, 8º + 9º*3
Dual-P Valve


MacPherson Strut


MacPherson Strut


STD


STD


Rack and Pinion


17.4 : 1


Integral Type


*: Unladed Vehicle
*
1: With Moon Roof
*2: Produced by TMC
*3: Produced by TMMK