height TOYOTA CAMRY 2000 Service Owner's Guide

'99camry U
56
ÐBuilt±in child restraint
The built±in child restraint system mainly
consists of a child seat integrated in the
rear seat and 5±point seat belts. Refer to
the illustration to become familiar with the
parts of the system. This child restraint
system conforms to U.S. Motor Vehicle
Safety Standard No.213 and Canada Motor
Vehicle Safety Standard No.213.4.
1. Shoulder belts
2. Head restraint lock release button
3. Storage bag (for the head restraint and
upper pad)
4. Head restraint and upper pad
(for the rear seat)
5. Maximum shoulder height indicator
label
6. Removable pad
7. Seat belt buckle
8. Seat belt release strap (black)
9. Seat belt adjustment strap (gray tab)
10. Child seat cushion
11. Seat belt buckle release button
12. Seat belt tabs
13. Owner 's manual supplement
14. Shoulder belt clip

'99camry U
57
This child restraint is designed for use
only by children who weigh between 10
and 30 kg (22.1 and 66.1 pounds), and
whose height is between 85 and 127 cm
(33.5 and 50.0 inches).
The child should be at least one year
old and must be capable of sitting up-
right alone and whose shoulder height
is at or below the maximum shoulder
height indicator.
It is important to use a rear±facing
child restraint until the child is about
a year old. A rear±facing restraint gives
the child's head, neck and body the
support they would need in a crash.
See ºÐChild restraint systemº for more
information.
If your child's shoulders are above the
indicator position, do not use the built±
in child restraint. Your child should use
the vehicle's seat belts.
According to accident statistics, children
are safer when properly restrained in the
rear seat than in the front seat.CAUTION
Make sure the child is securely re-
strained with the built±in child re-
straint. WARNING! Failure to follow
the manufacturer 's instructions on the
use of this child restraint system can
result in your child striking the ve-
hicle's interior during a sudden stop
or crash. Snugly adjust the belts pro-
vided with this child restraint around
your child.
When using the built±in child re-
straint, observe the following:

Use the belts for only one child at
a time. Do not use the belts for two
or more children.

Be careful not to damage the belt
webbing or hardware. Take care that
they do not get caught or pinched
in the seatback.

Inspect the belt system periodically.
Check for cuts, fraying, and loose
parts. Damaged parts should be re-
placed. Do not disassemble or
modify the child restraint belt sys-
tem.

Keep the belts clean and dry. If
they need cleaning, use a mild soap
solution or lukewarm water. Never
use bleach, dye, or abrasive clean-
ersÐthey may severely weaken the
belts.

Replace the built±in child restraint
assembly if it has been used in a
severe impact. The entire assembly
should be replaced even if damage
is not obvious.

Do not use a separate child re-
straint system over the opened
built±in child restraint.

When the built±in child restraint is
in use, do not use the adult lap and
shoulder belt instead of the built±in
child restraint seat belt as it can
cause severe injury to the child in
a sudden stop or crash.

'99camry U
59
4. Compress the shoulder belt clip to
separate the right and left shoulder
belts.5. Pull down the seatback part of the
removable pad. Make sure the child's
shoulders are at or below the maxi-
mum shoulder height indicator label.
The removable pad is attached by fasten-
er tapes.
CAUTION
If your child's shoulders are above
the maximum shoulder height indica-
tor label, do not use the built±in child
restraint. Your child should use the
adult lap and shoulder belt.
6. Press the removable pad against the
fastener tapes and install the pad to
the seatback. Make sure the belts go
through the slots in the pad.
CAUTION
If you have removed the removable
pad for cleaning etc., do not use the
built±in child restraint without the
pad.

'99camry U
224
CAUTION

Do not drive with the snow tires
incorrectly inflated.

Never drive over 120 km/h (75 mph)
with any type of snow tires.
TIRE CHAIN SELECTION
Use the tire chains of correct size and
type.
Use SAE Class ºSº type radial tire chains
except radial cable chains or V±bar type
chains.
Regulations regarding the use of tire
chains vary according to location or
type of road, so always check them
before installing chains.
CHAIN INSTALLATION
Install the chains on the front tires as
tightly as possible. Do not use tire
chains on the rear tires. Retighten
chains after driving 0.5Ð1.0 km
(1/4Ð1/2 mile).
When installing chains on your tires, care-
fully follow the instructions of the chain
manufacturer.If wheel covers are used, they will be
scratched by the chain band,so remove
the covers before putting on the chains.
CAUTION

Do not exceed 50 km/h (30 mph) or
the chain manufacturer 's recom-
mended speed limit, whichever is
lower.

Drive carefully avoiding bumps,
holes, and sharp turns, which may
cause the vehicle to bounce.

Avoid sharp turns or locked±wheel
braking, as use of chains may ad-
versely affect vehicle handling.
Replacing wheels
WHEN TO REPLACE YOUR WHEELS
If you have wheel damage such as
bending, cracks or heavy corrosion, the
wheel should be replaced.
If you fail to replace damaged wheels, the
tire may slip off the wheel or they may
cause loss of handling control.
WHEEL SELECTION
When replacing wheels, care should be
taken to ensure that the wheels are re-
placed by ones with the same load ca-
pacity, diameter, rim width, and offset.
This must be observed on compact spare
tires, too.
Correct replacement wheels are available
at your Toyota dealer.
A wheel of a different size or type may
adversely affect handling, wheel and bear-
ing life, brake cooling, speedometer/odom-
eter calibration, stopping ability, headlight
aim, bumper height, vehicle ground clear-
ance, and tire or snow chain clearance to
the body and chassis.

'99camry U
164
You may hear a sound in the engine
compartment for a few seconds when the
engine is started or just after the vehicle
is started. This means that the anti±lock
brake system is in the self check mode,
and does not indicate a malfunction.
Effective way to press the ºABSº brake
pedal:
When the anti±lock brake system func-
tion is in action, you may feel the brake
pedal pulsating and hear a noise. In this
situation, to let the anti±lock brake sys-
tem work for you, just hold the brake
pedal down more firmly. Do not pump
the brake in a panic stop. Pumping the
brake pedal makes the stopping distance
longer.
The brake pedal pulsation caused by the
anti±lock brake system may indicate haz-
ardous road surface conditions. Although
the anti±lock brake system assists in pro-
viding vehicle control, it is still important
to drive with all due care, because the
anti±lock brake system cannot overcome
the laws of physics that act on your ve-
hicle:

Braking capability is dependent on tire
friction with the road surface.

Even though the anti±lock brake sys-
tem is operating, a driver cannot main-
tain full control on certain slippery road
surfaces, when cornering at high
speeds, or in violent maneuvers.

Avoid high speeds on wet roads. The
anti±lock brake system cannot elimi-
nate the risk of hydroplaning and loss
of tire friction.
Always maintain a safe distance from the
vehicle in front of you. Compared with
vehicles not fitted with an anti±lock brake
system, your vehicle may require a longer
stopping distance in the following cases:

Driving on rough, gravel or snow±cov-
ered roads.

Driving with tire chains installed.

Driving on roads where the road sur-
face is pitted or has other differences
in surface height.
ºABSº warning light
The light comes on when the ignition key
is turned to the ºONº position. After a few
seconds, the light will go off.
If either of the following conditions occurs,
this indicates a malfunction somewhere in
the parts monitored by the warning light
system. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light does not come on as de-
scribed above, or remains on.

The light comes on while driving.

'99camry U
169
Part 3
STARTING AND
DRIVING

Before starting the engine

How to start the engine

Tips for driving in various
conditions

Winter driving tips

Tr ailer towing

How to save fuel and make
your vehicle last longer, too
Before starting the engine
1. Check the area around the vehicle be-
fore entering it.
2. Adjust seat position, seatback angle,
head restraint height and steering
wheel angle.
3. Adjust inside and outside rear view
mirrors.
4. Lock all doors.
5. Fasten seat belts.1. Apply the parking brake firmly.
2. Turn off unnecessary lights and acces-
sories.
3.Manual transmission: Press the clutch
pedal to the floor and shift the trans-
mission into neutral. Hold the clutch
pedal to the floor until the engine is
started. A starter safety device will pre-
vent the starter from operating if the
clutch pedal is not fully depressed.
Automatic transmission: Put the se-
lector lever in ºPº. If you need to re-
start the engine while the vehicle is
moving, put the selector lever in ºNº.
A starter safety device will prevent the
starter from operating if the selector
lever is in any drive position.
4.Automatic transmission only: De-
press the brake pedal and hold it to
the floor until driving off.
How to start the engineÐ
(a) Before cranking

'99camry U
239
Part 8
SPECIFICATIONS

Dimensions and weight

Engine

Fuel

Service specifications

Ti r es

Fuses
Dimensions and weight
P205/65R15 tire P195/70R14 tire
Overall length mm (in.) 4783 (188.3) 4783 (188.3)
Overall width mm (in.) 1780 (70.1) 1780 (70.1)
Overall height mm (in.) 1416 (55.7)
*
2670 (105.1)1419 (55.9)
*
2670 (105.1) Wheelbase mm (in.)
Front tread mm (in.) 1547 (61.0) 1547 (61.0)
Rear tread mm (in.) 1520 (59.8) 1520 (59.8)
*: Unladen vehicle Vehicle capacity weight
(occupants + luggage) kg (lb)410 (900) 410 (900)

APPENDIX ± TERCEL
CE2-Door Body Type
1st Gear km / h (mph) Angle of Approach degrees
Angle of Departure degrees
ItemArea
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Curb Weight
Gross Vehicle Weight
RatingFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal.)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Max. Permissible
Speed
Turning Diameter
(Outside Front)2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
U.S.A.
0 to 100 km / h sec.
0 to 400 m sec. Acceleration
Counter Gear Ratio4-Door
11 6
MAJOR TECHNICAL SPECIFICATIONS

TERCEL
EL53L-ADMRKA EL53L-ADHRKA EL53L-AEMRKA EL53L-AEPRKA
4130 (162.6)



1660 (65.4)



1375 (54.1)



2380 (93.7)



1400 (55.1)



1395 (54.9)



979 (38.5)



926 (36.5)



1046 (41.2)



801 (31.5)



1315 (51.8)
1316 (51.8)

1311 (51.6)
1300 (51.2)

810 (31.9)



940 (37.0)



125 (4.9)



19



17



562 (1240) 590 (1300) 565 (1245) 612 (1350)
365 (805) 358 (790) 374 (825)

927 (2045) 948 (2090) 940 (2070) 986 (2175)
ÐÐÐÐ
ÐÐÐÐ
1360 (3000) 1380 (3045) 1377 (3035) 1424 (3140)
45 (11.9, 9.9)



0.263 (9.3)



180 (112) 170 (106) 180 (112) 170 (106)
150 (93) 140 (87) 150 (93) 140 (87)
ÐÐÐÐ
ÐÐÐÐ
46 (28) 55 (34) 46 (28) 53 (33)
85 (53) 100 (62) 85 (53) 96 (60)
132 (82) Ð 132 (82) 165 (103)
ÐÐÐÐ
10.2 (33.5)



10.0 (32.8)



5E-FE


16-Valve, DOHC


74.0 x 87.0 (2.91 x 3.43)



1497 (91.3)



9.4 : 1



SFI



91



69@5400 (93@5400)



136@4400 (100@4400)



12-40, 12-32*
1, 12-48*212-40, 48*212-40, 32*1, 48*212-40, 48*2
720, 840*1840 720, 840*1840
0.8, 1.0*2



Dry, Single Plate Ð Dry, Single Plate Ð
C151 A132L C151 A242L
3.545 2.810 3.545 3.643
1.904 1.549 1.904 2.008
1.233 1.000 1.233 1.296
0.885 Ð 0.885 0.892
0.725 Ð 0.725 Ð
3.250 2.296 3.250 2.977
Ð 0.945 Ð Ð
3.722

2.821
Ventilated Disc



L.T. Drum



Drum



Single, 8º



Dual-P Valve



MacPherson Strut



Torsion Beam



STD



STD



Rack and Pinion



21.8, 17.5*
1



Integral Type*1



*
1: Unladen Vehicle *1: Option
*2: Set Option with Cold Area Spec. *3: With P175 / 65R14 or P185 / 60R14 Tire

APPENDIX ± PASEO
2-Door Coupe
Ð Body TypeItemArea
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degress
Angle of Departure degress
Curb Weight
Gross Vehicle Weight
RatingFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal.)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Turning Diameter
(Outside Front)0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
U.S.A.
ÐCanada
11 8

PASEO
EL54L-DCMSKA EL54L-DCPSKA EL54L-DCMSKK EL54L-DCPSKK
4155 (163.6)



1660 (65.4)



1296 (51.0)



2380 (93.7)



1405 (55.3)



1395 (54.9)



960 (37.8)



812 (32.0)



1044 (41.1)



762 (30.0)



1315 (51.8)



1280 (50.4)



925 (36.4)



845 (33.3)



125 (4.9)



13



21



583 (1285) 628 (1385) 587 (1295) 633 (1395)
352 (775)
354 (780)

935 (2060) 980 (2160) 941 (2075) 987 (2175)
ÐÐÐÐ
ÐÐÐÐ
1284 (2830) 1331 (2935) 1281 (2825) 1331 (2935)
45 (11.9, 9.9)



0.277 (7.5)



180 (112) 175 (109) 180 (112) 175 (109)
145 (90) 140 (87) 145 (90) 140 (87)
11.0 12.0 11.0 12.0
17.8 18.6 17.8 18.6
42 (26) 53 (33) 42 (26) 53 (33)
80 (50) 97 (61) 80 (50) 97 (61)
117 (73) Ð 117 (73) Ð
160 (99) Ð 160 (99) Ð
10.5 (34.4)



10.0 (32.8)



5E-FE



16-Valve, DOHC



74.0 x 87.0 (2.91 x 3.43)



1497 (91.3)



9.4 : 1



SFI



91



69 / 5400 (93@5400)



136 / 4400 (100@4400)



12-40, 48*
1
12-48

720, 840*1840


0.8, 1.0*1
1.0

Dry, Single Ð Dry, Single Ð
C150 A244E C150 A244E
3.545 4.005 3.545 4.005
1.904 2.208 1.904 2.208
1.310 1.425 1.310 1.425
0.969 0.981 0.969 0.981
0.815 Ð 0.815 Ð
3.250 3.272 3.250 3.272
ÐÐÐÐ
3.941 2.821 3.941 2.821
Ventilated Disc



L.T. Drum



Drum



Single, 8º



Dual P-Valve



MacPherson Strut



Torsion Beam



STD



STD



Rack and Pinion



17.5 : 1



Integral Type



*
1: Unladen Vehicle
*1: Option

ItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Speed
Turning Diameter
(Outside Front)0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
U.S.A.
VE
CE 4-Door Sedan
120

COROLLA
ZZE110L-DEMRKA ZZE110L-DEHRKA ZZE110L-DEMDKA ZZE110L-DEPDKA
4420 (174.0)



1695 (66.7)



1385 (54.5)



2465 (97.0)



1460 (57.5)



1450 (57.1)



998 (39.2)



937 (36.9)



1079 (42.5)



810 (31.9)



1341 (52.8)



1326 (52.2)



890 (35.0)



1065 (41.9)



120 (4.7)



16



15



650 (1433) 675 (1488) 650 (1433) 685 (1510)
445 (981) 440 (970) 450 (992)

1095 (2414) 1115 (2458) 1100 (2425) 1135 (2502)
ÐÐÐÐ
ÐÐÐÐ
1595 (3516)



50 (13.2, 11.0)



0.343 (12.1)



180 (111)



165 (102)



ÐÐÐÐ
17.0 18.4 17.0 17.8
54 (34) 70 (43) 54 (34) 65 (40)
91 (57) 126 (78) 91 (57) 118 (73)
132 (82) 180 (112) 132 (82) 180 (112)
180 (112) Ð 180 (112) Ð
10.4 (34.1)



9.8 (32,2)



1ZZ-FE



16-Valve DOHC



79.0 x 91.5 (3.11 x 3.60)



1794 (109.5)



10.0 : 1



SFI



91



89 / 5600 (120@5600)



165 / 4400 (122@4400)



12 ± 48



960



1.2, 1.4*
1



Dry, Single Ð Dry, Signle Ð
C59 A131L C59 A245E
3.166 2.810 3.166 3.643
1.904 1.549 1.904 2.008
1.310 1.000 1.310 1.296
0.885 Ð 0.885 0.892
0.725 Ð 0.725 Ð
3.250 2.296 3.250 2.977
Ð 0.945 Ð Ð
3.722 3.421 3.722 2.655
Ventilated Disc



Leading-Trailing Drum



Drum



Single, 9º



Dual-P Valve



MacPherson Strut



MacPherson Strut



STD



STD



Rack and Pinion



18.1



Integral Type



*: Unladen Vehicle
*
1: Option