reset TOYOTA CAMRY 2007 XV40 / 8.G Owner's Guide

’07Camry_U (L/O 0608)
237
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
When using the knob:
“Push the talk switch and say a new
name.” is heard.
1. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.To set speed dial
1. Push the talk switch and say “Set
Speed dial”, or turn the “AUDIO CTRL”
knob until “Speed Dial” is displayed
and push the knob.
“Set speed dial. Push the talk switch and
say a name.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.When using a voice command:
“XXXX To register this as a speed dial
entry, push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Push the preset button to assign to
XXXX” is heard.
2. Push and hold the desired preset but-
ton.
“preset... is now assigned. Returning to
the phone book.” is heard.
When using the knob:
“Push the preset button to assign to
XXXX” is heard.
Push and hold the desired preset button.
“preset... is now assigned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

’07Camry_U (L/O 0608)
240
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Dial
Turn the “AUDIO CTRL” knob until the
number that you want to dial is displayed
and push the knob. After that, do the one
of the following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to delete is
displayed and push the knob.
2. Push the talk switch and say “Delete”,
or turn the “AUDIO CTRL” knob until
“Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say con-
firm. Otherwise, say go back” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard.Store
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.
2. Push the talk switch and say “Store”,
or turn the “AUDIO CTRL” knob until
“Store” is displayed and push the knob.
“Store. Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 231.
The system may not function in the follow-
ing cases:
If there is no incoming history.
If the phone book is locked.
INFORMATION
Up to five incoming calls can be
stored in the system.
When five incoming calls are stored
in memory, the oldest incoming call
is deleted to make room in memory
for new calls.
If the cellular phone is not registered, this
system cannot be used. See page 221 for
registering a cellular phone. Make sure
that “BT” is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 237 for setting the preset
buttons.
Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off−hook switch to turn the
hands−free system on.
—Making a phone call

’07Camry_U (L/O 0608)
241
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
To speed dial
1. Push the preset button where the de-
sired number is set. The name or tele-
phone number is displayed.
2. Push the off−hook switch to dial.
To dial by Name
1. Push the talk switch and say “Dial by
name”.
“Dial by name. Please push the talk
switch and say the stored name, or say
list names.” is heard and “Dial by Name”
is displayed.
2. Push the talk switch and say “XXXX”,
or turn the “AUDIO CTRL” knob until
the phone name that you want to dial
is displayed and push the knob.When using a voice command:
“XXXX Push the off−hook switch to dial.
Otherwise, push the talk switch and say
dial, or go back.” is heard. After that, do
the one of the following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
If there is no number registered in the
preset button.
If the system does not recognize the
voice command.
INFORMATION
The phone numbers registered in
the phone book can be retrieved.
The system does not recognize that
the voice tag is not registered in
the registered cellular phone. For
details about voice tags, see “To
add entry” on page 231.
A shortcut to “Dial by name” is
available. Push the talk switch and
say “Dial XXX (name you want to
dial)”.

’07Camry_U (L/O 0608)
266
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
To reset the hour: Push the “H” button.
To reset the minutes: Push the “M” button.
The ignition switch must be set at ACC
or ON position.
If the electrical power source has been
disconnected from the clock, the time dis-
play will automatically be set to 1:00 (one
o’clock).
When the instrument panel lights are
turned on, the brightness of the time indi-
cator will be reduced.The direction is indicated on the inside
rear view mirror.
If the ignition switch was turned off with
the system on, the system will automati-
cally turn back on when the ignition switch
is turned on.
Push the “AUTO” switch for longer than 3
seconds to turn the compass system on
and off.
The compass indicates the direction
that the vehicle is heading. In the
above case, it shows that the vehicle is
heading north.Displays
Directions
N
NE
E
SE
S
SW
W
NWNorth
Northeast
East
Southeast
South
Southwest
West
Northwest
The compass may not show the correct
direction in the following conditions:
The vehicle is stopped immediately af-
ter turning.
The compass does not adjust while the
vehicle is stopped.
The ignition switch is turned off imme-
diately after turning.
The vehicle is on an inclined surface.
The vehicle is in a place where the
earth’s magnetic field is subject to in-
terference by artificial magnetic fields
(underground parking, under a steel
tower, between buildings, roof parking,
near a crossing, near a large vehicle,
etc.).
Clock Compass