ignition TOYOTA CAMRY 2018 Owners Manual (in English)

Steering wheel controls
2
OVERVIEWInstrument panel
Tilt and telescopic steering lock release lever
Ignition switch
1
Headlight/turn signal/fog light controls
Automatic High Beam (AHB) switch VSC OFF switch
Bird’s Eye View Camera ON/OFF switch
1,2Trunk opener switch
Fuel tank door release switch
Odometer/trip meter
Instrument panel light control switch
‘STOP/START/ENGINE’ button
1
Hood release leverDynamic Radar Cruise
Control (DRCC) or Cruise
control switch
Dynamic Radar Cruise Control
(DRCC) vehicle-to-vehicle distance
button
Lane Departure Alert with Steering
Assist (LDA w/SA) switch
Steering wheel
audio controls
2
Telephone switch
Audio remote control
switches
2
Paddle shift switches1
Windshield wiper and washer controls
Meters/Multi-Information Display (MID)
Meter control switches
Voice command switch2
Parking brake1

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
9
Automatic transmission
* The “POWER” switch/ignition switch must be “ON” and the br\
ake pedal
depressed to shift from Park.
Shift the shift lever to “S” position from “D” position.
+  6QTIJGU QVTIBOESFMFBTF

-  %PXOTIJGU QVMMBOESFMFBTF

Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position.
N
Park*
Reverse
Neutral
Drive

22
Color Head-up display (HUD) (if equipped)
The head-up display can display the current vehicle speed and ECO drivin\
g
indicator in front of the driver. Also, it can display various types of \
information to
assist the driver.
Select “
” and then “wJOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
UPBDDFTT
Head-up display settings. And push “
,” to enter selection.
Refer to the Owner’s Manual for more details.
Driving assist system status/
navigation system-linked display area
Power outlets-12V DC
The “POWER” switch/ignition switch must be set at “ACCESSORY”\
or “ON” position
for use.
Front console Center console (USB ports) (if equipped)
FEATURES & OPERATIONS
Shift position/speed limit display area
ECO driving indicator/Tachometer
Information display area Vehicle speed display

32
TOYOTA SAFETY SENSE™
CHANGING THE PCS ALERT TIMING
FarMiddle
(default) Near

1SFTTi” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select from the MID and then press “”. The
setting screen is displayed.

1SFTTi
” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “\
” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition O\
n.
The system can be disabled/enabled and the alert timing of the system ca\
n be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an
alert and then automatic braking if needed.In certain conditions, the PCS system included with the TSS-P package ma\
y also
help to detect a pedestrian in front of your vehicle. With Toyota Safety\
Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave ra\
dar to
help detect a pedestrian in front of your vehicle in certain conditions.\
The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and\
motion of
the detected pedestrian. However, a pedestrian may not be detected depen\
ding
on the conditions, including the surrounding brightness and the motion, \
posture,
size, and angle of the potential detected pedestrian, preventing the sys\
tem from
operating or engaging. Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION

34
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LDA FUNCTIONS
LDA function display
Steering assist indicatorLDA indicatorLane
(2)
(1)
-BOF%FQBSUVSF"MFSU -%"
JOEJDBUPSTJMMVNJOBUJPOTIPXTUIFTZTUFNPQFSBUJPO
status.

35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The LDA function EJTQMBZTXIFOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
JTTXJUDIFE
to the driving assist system information screen.

5IFTZTUFNEJTQMBZTXIJUFTPMJEMJOFTBOEBXIJUF-%"JOEJDBUPSXIFOWJTJCMFMBOF
markers on the road are detected and system is operating. Both the LDA i\
ndicator
and a side line flashes yellow to alert the driver when the vehicle devi\
ates from its
lane.

5IF-%"JOEJDBUPSJTHSFFOXIFOTUFFSJOHBTTJTUGVODUJPOJTPQFSBUJOH

5IFTZTUFNEJTQMBZTPVUMJOFTPOUIF-%"JOEJDBUPSXIFOMBOFNBSLFSTPOUIFSPBE
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met aga\
in,
operation of the function is automatically restored. For example, LDA ma\
y not
function on the side(s) where white/yellow lines are not detectable.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
"%+645*/(5)&-%""-&354&/4*5*7*5:
DISABLING THE STEERING ASSIST FUNCTION
5IFESJWFSDBOBEKVTUUIFTFOTJUJWJUZPGUIF-%" XBSOJOH
GVODUJPOGSPNUIF
.VMUJ*OGPSNBUJPO%JTQMBZ .*%
DVTUPNJ[BUJPOTDSFFO
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.

1SFTTi
” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.

1SFTTi
” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
-%"'6/$5*0/4 $0/5*/6&%

36
TOYOTA SAFETY SENSE™
7&)*$-&48":8"3/*/(4:45&. 484
'6/$5*0/
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

1SFTTi” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.

1SFTTi
” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
"%+645*/(48":"-&354&/4*5*7*5:
DISABLING SWS