warning TOYOTA CAMRY 2018 Owners Manual (in English)

4
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2018 Owner’s
Manual.
Anti-lock Brake System warning1
Airbag SRS warning1
OVERVIEWInstrument cluster
Automatic High Beam (AHB)
indicator1
Blind Spot Monitor (BSM)
indicator3
AIRBAG ON/OFF indicator Type A1
AIRBAG ON/OFF indicator Type B1
1
If indicator does not turn off within a few seconds of starting the engi\
ne, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 Light flashes to indicate a malfunction.
Indicator symbols
Tachometer Tachometer
Outside temperature
Outside temperature Speedometer
Speedometer
Odometer/trip meter
Odometer/trip meter
Shift position
Shift position Fuel gauge
Fuel gauge
Multi-information display
Multi-information display
Engine coolant temperature display
Engine coolant temperature display Instrument panel light control
Instrument panel light control
Service indicators and reminders
4.2-inch display
7-inch display

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
5
Brake system warning1
Malfunction/
Check Engine indicator1
Driver seat belt reminder and front
passenger seat belt reminder (alarm
will sound if speed is over 12 mph)
Low Tire Pressure Warning1
Low fuel level warning
Theft deterrent/ Engine Immobilizer
system indicator
Fuel tank door position
Cruise control
indicators2
Master warning1
Headlight low/high
beam indicators
Turn signal indicator
Pre-Collision System (PCS)
warning light1,2
Lane Departure Alert (LDA) indicator
Slip indicator1
Vehicle Stability Control OFF
indicator1
Eco driving indicator1
Parking brake indicator2
Electric power steering warning1
Intelligent Clearance Sonar (ICS)
OFF indicator1,2,3
Rear passenger seat belt reminder
indicator Type A
Rear passenger seat belt reminder
indicator Type B
Brake hold operated indicator1,2,3
Brake hold standby indicator1,3
BSM w/Rear Cross Traffic Alert
(RCTA) Indicator3
BSM outside rear view mirror
indicators3
Intuitive Parking Assist (IPA)
indicator3
Sport mode driving indicator3
ECO mode indicator1,3
Low outside temperature indicator
3 If equipped.

31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
%JTQMBZ .*%
UPVSHFUIFESJWFSUPUBLFFWBTJWFBDUJPO
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)

36
TOYOTA SAFETY SENSE™
7&)*$-&48":8"3/*/(4:45&. 484
'6/$5*0/
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

1SFTTi” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.

1SFTTi
” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select the setting function and then press “.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
"%+645*/(48":"-&354&/4*5*7*5:
DISABLING SWS

38
TOYOTA SAFETY SENSE™
"%+645*/(%*45"/$&
To change the vehicle-to-
vehicle distance

Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of a preceding v\
ehicle
VQUPBQQSPYJNBUFMZGU N
BIFBE
EFUFSNJOFTUIFDVSSFOUWFIJDMFUPWFIJDMF
following distance and operates to maintain a suitable following distanc\
e from the
vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)

 Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.

 Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
OFDFTTBSZ
UIFTZTUFNBQQMJFTUIFCSBLFT UIFTUPQMJHIUTXJMMDPNFPOBUUIJT
UJNF
5IFTZTUFNXJMMSFTQPOEUPDIBOHFTJOUIFTQFFEPGUIFWFIJDMFBIFBE
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long d\
ownhill
slopes.
LONG
(default setting)MIDDLE SHORT
Preceding
vehicle mark

42
SAFETY & EMERGENCY FEATURESSafety Connect
® (if equipped)
Tire Pressure Monitoring (warning) System (TPMS)
Safety Connect® is a subscription-based telematics service that uses Global
1PTJUJPOJOH4ZTUFN (14
EBUBBOEFNCFEEFEDFMMVMBSUFDIOPMPHZUPQSPWJEFTBGFUZ
and security features to subscribers. Safety Connect
® is supported by Toyota’s
designated response center, which operates 24 hours per day, 7 days per \
week.
4FSWJDFTGPSTVCTDSJCFSTJODMVEF"VUPNBUJDDPMMJTJPOOPUJGJDBUJPO
4UPMFOWFIJDMF
location, Emergency assistance button and Enhanced roadside assistance
Contact your dealer for more information about Safety Connect
®.
If the Tire Pressure Warning indicator “” illuminates without blinking, adjust tire
pressures to factory-specified levels.* The light will turn off after a \
few minutes. The
warning light may come on due to temperature changes or changes in tire \
pressure
from natural air leakage.
If the tire pressure indicator flashes for more than 60 seconds and then\
remains on,
take the vehicle to your local Toyota dealer.
5HIHUWRWKH2ZQHU