reset TOYOTA CAMRY HYBRID 2011 XV50 / 9.G Quick Reference Guide

45
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
OVERVIEW
Indicator symbols Instrument cluster
Engine coolant temperature
Service indicator and reminder
Fuel economy meter
Gear shift position indicator
Speedometer
Fuel gauge
Odometer/trip meter/instrument panel light control and trip meter
reset button
Multiinformation display
Driving ready light
Charging system warning1
Brake system warning1
Front passenger occupant classification or front passenger AIR BAG
ON/OFF indicator
1If indicator does not turn off within a few seconds of starting engine, there may
be a malfunction. Have vehicle inspected by your Toyota dealer.
2If this light flashes, refer to “Cruise control,” Section 24, 2011 Owner’s Manual.
Antilock Brake System warning1
Headlight low/high beam indicator
Turn signal indicator
Slip indicator
1
Cruise control indicator2
Low Tire Pressure Warning1
Theft deterrent/Engine immobilizer system indicator
Open door warning
Airbag SRS warning1
Master warning
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Driving ready light
Malfunction/Check Engine indicator
1
Low fuel level warning
Electric power steering system warning1
Brake system warning light1
For details, refer to “Indicators and warning lights,” Section 22, 2011
Owner’s Manual
.
Cruise control SET indicator
2
Front fog light indicator
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 4

45
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
OVERVIEW
Indicator symbols Instrument cluster
Engine coolant temperature
Service indicator and reminder
Fuel economy meter
Gear shift position indicator
Speedometer
Fuel gauge
Odometer/trip meter/instrument panel light control and trip meter
reset button
Multiinformation display
Driving ready light
Charging system warning1
Brake system warning1
Front passenger occupant classification or front passenger AIR BAG
ON/OFF indicator
1If indicator does not turn off within a few seconds of starting engine, there may
be a malfunction. Have vehicle inspected by your Toyota dealer.
2If this light flashes, refer to “Cruise control,” Section 24, 2011 Owner’s Manual.
Antilock Brake System warning1
Headlight low/high beam indicator
Turn signal indicator
Slip indicator
1
Cruise control indicator2
Low Tire Pressure Warning1
Theft deterrent/Engine immobilizer system indicator
Open door warning
Airbag SRS warning1
Master warning
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Driving ready light
Malfunction/Check Engine indicator
1
Low fuel level warning
Electric power steering system warning1
Brake system warning light1
For details, refer to “Indicators and warning lights,” Section 22, 2011
Owner’s Manual
.
Cruise control SET indicator
2
Front fog light indicator
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 4

9
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
8
Hood release
Pull up latch and raise hood
Pull
Fuel tank door release and cap
Push*
Engine oil filler cap
Engine oil level dipstickWindshield washer fluid tank
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance.
Please refer to the “Warranty Maintenance Guide.”
Engine maintenance
Light controlInstrument panel
Brightness
control
+
Store
Turn
OVERVIEW
(1)
(3)
(5)(2)
(4)
NOTE:Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
NOTE: This is also the
trip meter reset button.
*It may take up to 10 seconds after
pushing button for the door to open
if the internal tank pressure is high.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 8

9
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
8
Hood release
Pull up latch and raise hood
Pull
Fuel tank door release and cap
Push*
Engine oil filler cap
Engine oil level dipstickWindshield washer fluid tank
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance.
Please refer to the “Warranty Maintenance Guide.”
Engine maintenance
Light controlInstrument panel
Brightness
control
+
Store
Turn
OVERVIEW
(1)
(3)
(5)(2)
(4)
NOTE:Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
NOTE: This is also the
trip meter reset button.
*It may take up to 10 seconds after
pushing button for the door to open
if the internal tank pressure is high.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 8

18
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Steering wheel switches
Audio controlA/C control
“MODE”Push to turn audio ON and select an audio mode. Push and hold to turn
the audio system OFF.
“”Use to search within the selected audio medium (radio, CD, iPod, etc.).
vv
Volume controlTemperature
selector
Auto A/C
ON
A/C OFF
Audio
CD PLAYER
To scan tracks on a disc Push and hold “SCAN.” Push again to hold
selection.
CD changer (Type 2 only)
Toload one disc
Push “LOAD” and insert one disc.
To load multiple discs Push and hold “LOAD” until you hear a beep.
Insert one disc. Shutter will close and then reopen for next disc.
To select a file (MP3/WMA only) Turn “TUNE.
FILE” or “TUNE.
SCROLL.”
Toselect a folder (MP3/WMA only) Push either side of “FOLDER.”
Type 2
Eject CD
Push to turn
ON/OFFPush to adjust
tone & balance
Seek station/
CD track select
Station/CD
track scanMode
Preset buttons functions in other
modes indicated above number
Load CD(s)
Push to skip
up/down folder
View CD text
Type 1
RADIO
To preset stations Tune in the desired station and hold down a preset
button until you hear a beep. Push desired preset button to select.
To scan stations Push and hold “SCAN” to scan preset stations. Push again
to hold selection.
By inserting a mini plug into the AUX or USB/AUX audio jack, you can
listen to music from a portable audio device through the vehicle’s speaker
system while in AUX or USB/AUX mode.
AUX or USB/AUX audio jack
19
Wire pass through
Eject CD
Push to turn
ON/OFFPush to adjust
tone & balance
Seek station/
CD track select
Mode
Preset buttons functions in other
modes indicated above number
Push to skip
up/down folder
View CD text
Mute/pause Station/CD
track scan
USB/AUX audio jack
(if equipped)
AUX audio jack
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 18

18
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Steering wheel switches
Audio controlA/C control
“MODE”Push to turn audio ON and select an audio mode. Push and hold to turn
the audio system OFF.
“”Use to search within the selected audio medium (radio, CD, iPod, etc.).
vv
Volume controlTemperature
selector
Auto A/C
ON
A/C OFF
Audio
CD PLAYER
To scan tracks on a disc Push and hold “SCAN.” Push again to hold
selection.
CD changer (Type 2 only)
Toload one disc
Push “LOAD” and insert one disc.
To load multiple discs Push and hold “LOAD” until you hear a beep.
Insert one disc. Shutter will close and then reopen for next disc.
To select a file (MP3/WMA only) Turn “TUNE.
FILE” or “TUNE.
SCROLL.”
Toselect a folder (MP3/WMA only) Push either side of “FOLDER.”
Type 2
Eject CD
Push to turn
ON/OFFPush to adjust
tone & balance
Seek station/
CD track select
Station/CD
track scanMode
Preset buttons functions in other
modes indicated above number
Load CD(s)
Push to skip
up/down folder
View CD text
Type 1
RADIO
To preset stations Tune in the desired station and hold down a preset
button until you hear a beep. Push desired preset button to select.
To scan stations Push and hold “SCAN” to scan preset stations. Push again
to hold selection.
By inserting a mini plug into the AUX or USB/AUX audio jack, you can
listen to music from a portable audio device through the vehicle’s speaker
system while in AUX or USB/AUX mode.
AUX or USB/AUX audio jack
19
Wire pass through
Eject CD
Push to turn
ON/OFFPush to adjust
tone & balance
Seek station/
CD track select
Mode
Preset buttons functions in other
modes indicated above number
Push to skip
up/down folder
View CD text
Mute/pause Station/CD
track scan
USB/AUX audio jack
(if equipped)
AUX audio jack
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 18

25
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
24
SAFETY AND EMERGENCY FEATURE
Push up, or
squeeze lock
release to lower
System reset initialization
1.Push and hold “ SET” button
until the indicator blinks three
times.
2. Wait a few minutes to allow
initialization to complete.
Seat beltsShoulder belt anchor
Rear seat outside position guides provide added comfort for children who
have outgrown child restraints.
Child comfort guide
Spare tire & tools
Tool location
Wheel nut wrench Jack handle
Transport eyelet
(if equipped)
Removing the spare tire
(1) Loosen and remove the nut.
(2) Remove the spare tire cover.
(3) Loosen and remove the bolt.
(4) Remove the jack tray.
Jack
Spare tire
TrunkInternal release
Pull up
(1)
(4)
(3)
(2)
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the POWER switch to “ON” mode, and press and hold the
Owner’sManualfor tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently,setting the tire pressures to factory
specifications should turn off the light.
Refer to the Owner’s Manualfor
tire changing and jack
positioning procedures.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 24

25
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
24
SAFETY AND EMERGENCY FEATURE
Push up, or
squeeze lock
release to lower
System reset initialization
1.Push and hold “ SET” button
until the indicator blinks three
times.
2. Wait a few minutes to allow
initialization to complete.
Seat beltsShoulder belt anchor
Rear seat outside position guides provide added comfort for children who
have outgrown child restraints.
Child comfort guide
Spare tire & tools
Tool location
Wheel nut wrench Jack handle
Transport eyelet
(if equipped)
Removing the spare tire
(1) Loosen and remove the nut.
(2) Remove the spare tire cover.
(3) Loosen and remove the bolt.
(4) Remove the jack tray.
Jack
Spare tire
TrunkInternal release
Pull up
(1)
(4)
(3)
(2)
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the POWER switch to “ON” mode, and press and hold the
Owner’sManualfor tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently,setting the tire pressures to factory
specifications should turn off the light.
Refer to the Owner’s Manualfor
tire changing and jack
positioning procedures.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 24