ECO mode TOYOTA CAMRY HYBRID 2017 XV50 / 9.G Quick Reference Guide

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
3
Type B Type A
1 If equipped.2 For vehicles with Entune Premium Audio or Entune Audio Plus, refer to th\
e
“Navigation System Owner’s Manual” and “2017 Entune™ Audi\
o Quick
Reference Guide.”
Pre-Collision System (PCS) switch1
Tire Pressure Monitoring (warning) System (TPMS) reset switch1
Tilt and telescopic steering lock release lever
Air conditioning controls
Emergency flasher button
Eco drive mode switch EV drive mode
switch
Seat heater controls1
Outside rearview mirror/Rear window defogger button
Dynamic radar cruise control (DRCC)
Vehicle-to-vehicle distance button1
“ENGINE START STOP” button
2017_CamryHV_QRG_D4.indd 35/3/16 4:12 PM

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
5
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2017 Owner’s
Manual.
Driver seat belt reminder and/
or front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Airbag SRS warning1
Low Tire Pressure Warning1,4
Low fuel level warning
Electric power steering system warning1
Theft deterrent/ Engine Immobilizer
system indicator
Fuel tank door position
Cruise control
indicators2,3
Headlight low/high beam
indicators
Automatic High Beam indicator4
Turn signal indicator
Pre-Collision System (PCS)
warning light1,4
Lane Departure Alert (LDA) indicator4
Slip indicator1
Vehicle Stability Control OFF indicator1
Passenger Air Bag ON/OFF indicator1
ECO MODE indicator
EV drive mode indicator
EV indicator
Low outside temperature indicator
3 Light flashes in yellow to indicate a malfunction. Light flashes quickly\
in green to indicate that the
steering lock has not been released.
4 If equipped.
1 If indicator does not turn off within a few seconds of starting the Hybr\
id System, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 201\
7 Owner’s Manual.
Display change button
Service indicators and reminders
2017_CamryHV_QRG_D4.indd 55/3/16 4:12 PM

6
LOCKING OPERATION
UNLOCKING OPERATION
TRUNK LID
PANIC BUTTON
NOTE: If a door is not opened within 60 seconds of unlocking, all doors \
will
relock for safety.
Push and hold
Push and hold
START FUNCTION
Push
Push
ONCE: Driver door
TWICE: All doors
OVERVIEWKeyless entry (and remote entry)
Carry remote Type CSmart key feature
All-door lock
Touch
Carry remote Type CSmart key feature
Grasp
Driver door unlock*
POWER (WITHOUT STARTING HYBRID SYSTEM)
Push
Without depressing the brake pedal, pressing the “POWER” button wi\
ll change
the operation mode in succession from:
ACCESSORY
ON
OFF
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Carry remote to start
2017_CamryHV_QRG_D4.indd 65/3/16 3:20 PM

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
7
START FUNCTION
Fuel tank door release and cap
Smart key system
NOTE: Tighten until one click is heard. If
the cap is not tightened enough, Check
Engine “
” indicator may illuminate.
Turn to open
StorePull up
Close
POWER (WITHOUT STARTING HYBRID SYSTEM)
Without depressing the brake pedal, pressing the “POWER” button will chan\
ge
the operation mode in succession from:
Accessories such as the audio will operate.
Power ON; all electrical systems can be used.
All systems OFF; emergency flashers can be used.
ACCESSORY
ON
OFF
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Depress
brake pedalPush
Carry remote
to start
2017_CamryHV_QRG_D4.indd 75/3/16 4:13 PM

10
TransmissionHold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Automatic operation Push the switch completely down or pull it completely up and
release to fully open or close. To stop the window partway, operate the \
switch in
the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Auto lock/unlock
Automatic door locks can be programmed to operate in two different modes\
, or
turned OFF.
- Doors lock when shifting from Park.
- Doors lock when the vehicle speed is approximately 12 mph or higher.
- Doors unlock when shifting into Park.
- Doors unlock when the driver’s door is opened within 10 seconds aft\
er turning the “POWER” switch OFF.
Refer to the Owner’s Manual for more details.
1 The “POWER” switch must be set at “ON” and the brake pedal \
depressed to shift from Park.
2 The engine brake is the equivalent of downshifting. Shift to “B” w\
hen engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.).
B
Park1
Reverse
Neutral
Drive
Engine braking2
Push
Turn
Steering lock release
Driver side
FEATURES AND OPERATIONS
2017_CamryHV_QRG_D4.indd 105/3/16 3:20 PM

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
Parking brake
Set: Depress
Release: Depress again
Automatic operation Push the switch completely down or pull it completely up and
release to fully open or close. To stop the window partway, operate the \
switch in
the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Windows - Power
Up
Down
Window lock switch
Automatic door locks can be programmed to operate in two different modes\
, or
turned OFF.
- Doors lock when shifting from Park.
- Doors lock when the vehicle speed is approximately 12 mph or higher.
- Doors unlock when shifting into Park.
- Doors unlock when the driver’s door is opened within 10 seconds aft\
er turning the “POWER” switch OFF.
Refer to the Owner’s Manual for more details.
1 The “POWER” switch must be set at “ON” and the brake pedal \
depressed to shift from Park.
2 The engine brake is the equivalent of downshifting. Shift to “B” w\
hen engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.).
Lock release lever AngleLength
Driver side
2017_CamryHV_QRG_D4.indd 115/3/16 4:13 PM

14
HEADLIGHTS
TURN SIGNALS
* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease
wipe frequency.
Windshield wipers & washers
Power outlets-12V DC
USB/AUX port
By connecting a USB-compatible portable audio device or USB memory to th\
e
USB port, you can listen to music from the portable audio device or USB \
memory
through the vehicle’s speaker system.
By inserting a mini plug into the AUX port, you can listen to music from\
a portable
audio device through the vehicle’s speaker system while in AUX mode.
Open lid
FEATURES AND OPERATIONS
Front console Center console
The “POWER” switch/ignition switch must be set at “ACCESSORY”\
or “ON” position
for use.
Adjust frequency*
Pull to wash and wipeMist
Interval wipe
Slow
Fast
-Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
2017_CamryHV_QRG_D4.indd 145/3/16 3:21 PM

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
HEADLIGHTS
TURN SIGNALS
* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease
wipe frequency.
Parking lights Headlights
DRL OFF
Right turn
Lane change1
Lane change2
Left turn
Lights & turn signals
By connecting a USB-compatible portable audio device or USB memory to th\
e
USB port, you can listen to music from the portable audio device or USB \
memory
through the vehicle’s speaker system.
By inserting a mini plug into the AUX port, you can listen to music from\
a portable
audio device through the vehicle’s speaker system while in AUX mode.
Center console
The “POWER” switch/ignition switch must be set at “ACCESSORY”\
or “ON” position
for use.
FEATURES/OPERATIONS
High beam
-Daytime Running Light system (DRL)
Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
High beam
flasher
Low beam
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
2017_CamryHV_QRG_D4.indd 155/3/16 4:13 PM

28
Star Safety System™
SAFETY AND EMERGENCY FEATURES
ENHANCED VEHICLE STABILITY CONTROL (VSC)
SMART STOP TECHNOLOGY (SST)
Enhanced Vehicle Stability Control provides cooperative control of the A\
BS, TRAC,
VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of tracti\
on occurs
during a turn.
ANTI-LOCK BRAKE SYSTEM (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressu\
re to each
wheel. This limits brake lockup and helps provide directional control fo\
r the current
road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing Hybrid S\
ystem
output, and Traction Control helps maintain traction on loose gravel and\
wet, icy, or
uneven surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits Hybrid System output and applies the brakes to the spinning \
wheel.
This transfers power to the wheels that still have traction to help keep\
you on track.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help
maintain control and balance when braking. Abrupt stops can cause a vehi\
cle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to \
sudden
stops by redistributing brake force to enhance the braking effectiveness\
of all four
wheels. All new Toyota vehicles come standard with the Star Safety System
TM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), A\
nti-lock Braking
System (ABS), Electronic Brake-force Distribution (EBD), Brake Assis\
t (BA) and Smart
Stop Technology (SST).
Refer to the Owner’s Manual for more details and important informatio\
n on limitations
to these systems.
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the \
mat in
place.
• Install floor mats right side up.
Smart Stop Technology automatically reduces driving torque when the acce\
lerator
and brake pedals are pressed simultaneously under certain conditions.
2017_CamryHV_QRG_D4.indd 285/3/16 3:23 PM

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
29
Floor mat installation
SMART STOP TECHNOLOGY (SST)
Enhanced Vehicle Stability Control provides cooperative control of the A\
BS, TRAC,
VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of tracti\
on occurs
during a turn.
ABS helps prevent brakes from locking up by “pulsing” brake pressu\
re to each
wheel. This limits brake lockup and helps provide directional control fo\
r the current
road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
VSC helps prevent loss of traction during cornering by reducing Hybrid S\
ystem
output, and Traction Control helps maintain traction on loose gravel and\
wet, icy, or
uneven surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits Hybrid System output and applies the brakes to the spinning \
wheel.
This transfers power to the wheels that still have traction to help keep\
you on track.
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help
maintain control and balance when braking. Abrupt stops can cause a vehi\
cle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to \
sudden
stops by redistributing brake force to enhance the braking effectiveness\
of all four
wheels. All new Toyota vehicles come standard with the Star Safety System
TM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), A\
nti-lock Braking
System (ABS), Electronic Brake-force Distribution (EBD), Brake Assis\
t (BA) and Smart
Stop Technology (SST).
Refer to the Owner’s Manual for more details and important informatio\
n on limitations
to these systems.
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the \
mat in
place.
• Install floor mats right side up.
Smart Stop Technology automatically reduces driving torque when the acce\
lerator
and brake pedals are pressed simultaneously under certain conditions.
Always align the marks
2017_CamryHV_QRG_D4.indd 295/3/16 4:14 PM