Deviation TOYOTA FJ CRUISER 2007 1.G Owners Manual

1852007 FJ CRUISER from Oct. ’06Prod. (OM35873U)
The compass works to calibrate the direc-
tion automatically while the vehicle is in
motion, if deviation is small.
For additional precision or for complete
calibrating, see “CALIBRATING THE COM-
PASS” below.
If the direction is not indicated or the
system does not operate properly, contact
your Toyota dealer.
TS10007
Compass sensor
The compass sensor is in the accesso-
ry meter.
NOTICE
Do not put magnets or a metal object
on or near the accessory meter. Doing
this may cause malfunction of the
compass sensor.
TS10008a
CALIBRATING THE COMPASS (deviation
calibration)
The direction display on the compass
deviates from the true direction deter-
mined by the earth’s magnetic field. The
angle of deviation varies according to the
geographic position of the vehicle.
To adjust this deviation, stop the vehicle
and push and hold the “SET” button for
about 2 seconds. The zone number ap-
pears on the outside temperature display.
Select the zone number by pushing the
“E/M” button, referring to the following
map to determine where the vehicle is.