hood release TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual

16
Rear view monitor system
(vehicles without a Display Audio
system or navigation system)
P. 235
Tilt and telescopic steering lock release
lever
P. 106
Glove box P. 443
Pictorial indexInstrument panel
Power back door
main switch
 P. 74
Parking brake pedal P. 198
Hood release lever P. 496
Auxiliary box P. 451
Multi-information
display
P. 207
Fuel filler door opener P. 120
Fog light switch
Headlight switch
Turn signal lever P. 224
P. 218
P. 197
Windshield wiper and
washer switch
Rear window wiper and
washer switch
P. 226
P. 229
Gauges and
meters
P. 200
Floor mat P. 466
Horn P. 199
Power (ignition) switch (vehicles
with smart key system)
P. 183
Clock P. 211

496
4-3. Do-it-yourself maintenance
Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood release lever.
The hood will pop up slightly.
Lift the auxiliary catch lever
and lift the hood.
Hold the hood open by insert-
ing the supporting rod into
either of the slots.
STEP1
STEP2
STEP3

5
When trouble arises
605
5-2. Steps to take in an emergency
Have the vehicle inspected at your
nearest Toyota dealer as soon as
possible.
■ Overheating
The following symptoms may occur when your vehicle is overheating:
●Hybrid system output decreases.
● Steam comes from the engine area.
CAUTION
■To prevent an accident or injury when inspecting under the hood of
your vehicle
●If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, caus-
ing serious injury such as burns.
● With a hybrid vehicle, there are times when the gasoline engine automati-
cally starts to run or the cooling fans suddenly start to operate. Do not
touch or approach the rotating parts of the belt or fans. Doing so may lead
to fingers, clothes or tools getting caught, resulting in an accidental injury.
● Do not loosen the coolant reservoir cap while the hybrid system and radia-
tor are hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.
NOTICE
■When adding engine/power control unit coolant
Wait until the hybrid system has cooled down before adding engine/power
control unit coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot hybrid sys-
tem too quickly can cause damage to the hybrid system.

676
GAS STATION INFORMATION
Auxiliary catch leverP. 496Fuel filler doorP. 120
Hood release lever P. 4 9 6Fuel filler door opener P. 1 2 0Tire inflation pressure
P. 621
Back door openerP. 7 2
Fuel tank capacity (Reference) 17. 2 gal. (65.0 L, 14.3 Imp. gal.)
Fuel typeUnleaded gasoline with an Octane Rating
of 87 (Research Octane Number 91) or
higher
Cold tire inflation
pressure
P. 6 2 1
Engine oil capacity
(Drain and refill

reference) qt. (L, Imp. qt.)
Without filter 6.0 (5.7, 5.0)
With filter 6.4 (6.1, 5.4)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade:
P. 615
ILSAC multigrade engine oil
Recommended oil viscosity:
SAE 0W-20