fuse TOYOTA HIGHLANDER HYBRID 2014 XU50 / 3.G Owners Manual

5
1
8 7
6
5
4
3
2
HIGHLANDER_HV_U (OM48D74U)
9
6-1. Maintenance and careCleaning and protecting the vehicle exterior ................ 380
Cleaning and protecting the vehicle interior ................. 383
6-2. Maintenance Maintenance requirements ................... 386
General maintenance ........ 389
Emission inspection and maintenance (I/M)
programs ......................... 393
6-3. Do-it-yourself maintenance
Do-it-yourself service precautions ..................... 394
Hood.................................. 396
Positioning a floor jack ...... 398
Engine compartment ......... 399
12-volt battery ................... 407
Tires .................................. 412
Tire inflation pressure........ 421
Wheels .............................. 424
Air conditioning filter .......... 426
Electronic key battery ........ 428
Checking and replacing fuses ............................... 430
Light bulbs ......................... 434 7-1. Essential information
Emergency flashers ........... 450
If your vehicle has to be stopped in an
emergency....................... 451
7-2. Steps to take in an emergency
If your vehicle needs to be towed ...................... 452
If you think something is wrong ........................... 456
If a warning light turns on or a warning buzzer
sounds ............................. 457
If a warning message is displayed ......................... 466
If you have a flat tire .......... 486
If the hybrid system will not start ........................... 510
If the shift lever cannot be shifted from P ............. 512
If the electronic key does not operate properly ........ 513
If the 12-volt battery is discharged ....................... 516
If your vehicle overheats.... 521
If the vehicle becomes stuck ................................ 525
6Maintenance and care7When trouble arises

1393-2. Opening, closing and locking the doors
3
Operation of each component
HIGHLANDER_HV_U (OM48D74U)■
When reconnecting the 12- volt battery or changing a fuse while the back
door is open
To enable the power back door to operate properly, initialize the system by
completely closing the back door manually. If the 12-volt battery is recon-
nected or a fuse is changed while the back door is closed, initializing the sys-
tem is not necessary.
■ Customization
Settings (e.g. power back door opening angle) can be changed.
(Customizable features: P. 556)
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
■Before driving
● Make sure that the back door is fully closed. If the back door is not fully
closed, it may open unexpectedly while driving and hit near-by objects or
luggage in the luggage compartment may be thrown out, causing an acci-
dent.
● Do not allow children to play in the luggage compartment.
If a child is accidentally locked in the luggage compartment, they could
have heat exhaustion or other injuries.
● Do not allow a child to open or close the back door.
Doing so may cause the back door to move unexpectedly, or cause the
child’s hands, head, or neck to be caught by the closing back door.
■ Important points while driving
Never let anyone sit in the luggage compartment. In the event of sudden
braking, sudden swerving or a collision, they are susceptible to death or
serious injury.

3565-4. Using the other interior features
HIGHLANDER_HV_U (OM48D74U)
NOTICE
■To avoid damaging the power outlets
Close the power outlet lids when the power outlets are not in use.
Foreign objects or liquids that enter the power outlets may cause a short cir-
cuit.
■ To prevent blown fuses
12 V
Do not use an accessory that uses more than 12 V 10 A.
120 VAC
Do not use a 120 VAC appliance that requires more than 100 W.
If a 120 VAC appliance that consumes more than 100 W is used, the protec-
tion circuit will cut the power supply.
■ To prevent 12-volt battery discharge
Do not use the power outlet longer than necessary when the hybrid system
is off.
■ Appliances that may not operate properly (120 VAC)
The following 120 VAC appliances may not operate properly even if their
power consumption is under 100 W:
● Appliances with high initial peak wattage
● Measuring devices that process precise data
● Other appliances that require an extremely stable power supply

379
6Maintenance and care
HIGHLANDER_HV_U (OM48D74U)6-1. Maintenance and care
Cleaning and protecting the vehicle exterior .......... 380
Cleaning and protecting the vehicle interior ........... 383
6-2. Maintenance Maintenance requirements ................... 386
General maintenance........ 389
Emission inspection and maintenance (I/M)
programs......................... 393
6-3. Do-it-yourself maintenance
Do-it-yourself service precautions ..................... 394
Hood ................................. 396
Positioning a floor jack ...... 398
Engine compartment ......... 399
12-volt battery ................... 407
Tires .................................. 412
Tire inflation pressure ....... 421
Wheels .............................. 424
Air conditioning filter.......... 426
Electronic key battery........ 428
Checking and replacing fuses ............................... 430
Light bulbs......................... 434

394
HIGHLANDER_HV_U (OM48D74U)
6-3. Do-it-yourself maintenance
Do-it-yourself ser vice precautions
If you perform maintenance by yourself, be sure to follow the
correct procedure as given in these sections.
ItemsParts and tools
12-volt battery
condition
( P. 407)•Grease
• Conventional wrench (for terminal clamp bolts)
Brake fluid level
( P. 405)• FMVSS No.116 DOT 3 or SAE J1703 brake fluid
• Rag or paper towel
• Funnel (used only for adding brake fluid)
Engine/power
control unit cool-
ant level
( P. 403)
• “Toyota Super Long Life Coolant” or a similar high
quality ethylene glycol based non-silicate, non-
amine, non-nitrite and non-borate coolant with long-
life hybrid organic acid technology
For the U.S.A.:
“Toyota Super Long Life Coolant” is pre-mixed with
50% coolant and 50% deionized water.
For Canada:
“Toyota Super Long Life Coolant” is pre-mixed with
55% coolant and 45% deionized water.
• Funnel (used only for adding coolant)
Engine oil level
(  P. 400)• “Toyota Genuine Motor Oil” or equivalent
• Rag or paper towel
• Funnel (used only for adding engine oil)
Fuses ( P. 430)• Fuse with same amperage rating as original
Light bulbs
( P. 434)
• Bulb with same number and wattage rating as origi-
nal
• Phillips-head screwdriver
• Flathead screwdriver• Wrench
Radiator and con-
denser ( P. 404)
Tire inflation
pressure
( P. 421)• Tire pressure gauge
• Compressed air source
Washer fluid
( P. 406)• Water or washer fluid containing antifreeze (for win-
ter use)
• Funnel (used only for adding water or washer fluid)

3996-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM48D74U)
6
Maintenance and care
Engine compartment
Washer fluid tank (P. 406)
Brake fluid reservoir ( P. 405)
Engine oil filler cap ( P. 401)
Engine oil level dipstick ( P. 400)
Engine coolant reservoir ( P. 403) Power control unit coolant
reservoir (
P. 403)
Fuse boxes ( P. 430)
Electric cooling fans
Condenser ( P. 404)
Power control unit coolant
radiator ( P. 404)
Radiator ( P. 404)1
2
3
4
5
6
7
8
9
10
11

4306-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM48D74U)
Turn the power switch off.
Open the fuse box cover.
Engine compartment (type A fuse box)
Push the tab in and lift the lid off.
Engine compartment (type B fuse box)
Push the tab in and lift the lid off.
Engine compartment (type C fuse box)
Push the tab in and lift the lid off.
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2

4316-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM48D74U)
6
Maintenance and care
Under the driver’s side instrument panel
Remove the lid.
Luggage compartment
Remove the 12-volt battery cover
(  P. 407) and then remove the
terminal cover.
Remove the fuse with the pull-
out tool.
Only type A fuses can be removed
using the pullout tool.
3

4326-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM48D74U)
Check if the fuse is blown.Normal fuse
Blown fuse
Type A and B:
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type C:
Contact your Toyota dealer.
4
1
2
Ty p e AType B
Ty p e C

4336-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM48D74U)
6
Maintenance and care
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. ( P. 434)
● If the replaced fuse blows again, have the vehicle inspected by your Toyota
dealer.
■ If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
■ When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
WARNING
■To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
● Never use a fuse of a higher amperage rating than that indicated, or use\
any other object in place of a fuse.
● Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
● Do not modify the fuses or fuse boxes.
■ Fuse box near the power control unit
Never check or replace the fuses as there are high voltage parts and wiring
near the fuse box.
Doing so may cause electric shock, resulting in death or serious injury.
NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.