headlights TOYOTA HIGHLANDER HYBRID 2021 Owners Manual (in English)

23
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
or
Automatic High Beams*
High beam (Push)
Front fog lights come on only when the headlights are on low beam.
Daytime Running Light system (DRL) Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at\� night. Automatic light cut off system Lights automatically turn off after 30 second delay,
or when lock switch on the remote is pushed after all doors are locked.
Automatic High Beams (AHB) system Automatically switches between high and
low beams as appropriate to enhance vision at night.
Refer to Toyota Safety Sense™ 2.5+ (TSS 2.5+) in this guide or the \�Owner’s Manual
for more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the Owner’s Manual for d\�etails.
Low beam (Original position)
Parking lights
Auto
DRL OFF High beam
flasher (Pull)
Headlights
Turn
Right turn
Left turn
Lights & turn signals
HEADLIGHTS
FRONT FOG LIGHTS
TURN SIGNALS
OFF ON
* Move lever partway and release. The signals will flash three times.
Lane change*
Lane change*
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 23130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 237/9/21 2:41 AM7/9/21 2:41 AM

42
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 2.5+ (TSS 2.5+) is a set of active safety technologies
designed to help mitigate or prevent collisions across a wide range of t\�raffic
situations, in certain conditions. TSS 2.5+ is designed to help support \�the driver’s
awareness, decision making and vehicle operation contributing to a safe \�driving
experience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense.
Quick overview-Toyota Safety Sense™ 2.5+
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced grille-mounted radar system is designed to work with
the forward-facing camera to help recognize a preceding pedestrian or
bicyclist, and provide an alert, mitigation and/or avoidance support in \�
certain conditions.
Lane Departure Alert with Steering Assist
Lane Departure Alert with Steering Assist is designed to provide
notification when the system detects an unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\�
keep the vehicle in its lane.
The Sway Warning function is designed to detect vehicle swaying
(based on the vehicle location and steering wheel operation) and alert\�
drivers with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and
the tail lights of preceding vehicles and switch between high beams
and low beams as appropriate.
Road Sign Assist (RSA)
RSA is designed to recognize specific road signs using the forward-
facing camera to provide information to the driver via the display.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
Full-Speed Range DRCC is designed to help maintain a pre-set
distance to a preceding vehicle when the preceding vehicle is traveling \�
at a lower speed. The minimum set speed is approximately 20 MPH, but
once activated, the operating speed range is 0-110 MPH.
Lane Tracing Assist (LTA) System
LTA contains all the features of Lane Departure Alert with Steering
Assist described below and additionally is designed to help keep the
vehicle in the center of a lane by assisting the driver in steering cont\�rol
when using Full-Speed Range DRCC.
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 42130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 427/9/21 2:41 AM7/9/21 2:41 AM

55
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of the following conditions are met, the high beams will be aut\�omatically
turned on (after approximately 1 second):• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\� lights turned on.
• There are few streetlights on the road ahead.
If any of the following conditions occur, the high beams will be automat\�ically turned off: • Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turne\�d on.
• There are many streetlights on the road ahead.
The Automatic High Beams (AHB) safety system is designed to help you s\�ee
more clearly at night. At speeds above 25 mph, AHB can detect the headli\�ghts of
oncoming vehicles and taillights of preceding vehicles, then automatical\�ly toggles
between high and low beams accordingly.
See toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situation\�s in which the
system operation may be limited.
(2) (1)
(1) Press the “
” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO”
position.
The AHB indicator will come on when the headlights are turned on automat\�ically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off and “
” or “” will turn on. To activate the
system again, push the lever its original position or press the “
” switch.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 55130493_MY21_Highlander_HV_QRG_V6_ML_070821_PRINT_R1.indd 557/9/21 2:42 AM7/9/21 2:42 AM