engine TOYOTA HILUX 2013 (in English) Service Manual

177 2-2. Instrument cluster
2
When driving
HILUX_OM_OM0K134E_(EE)
Speedometer
Displays the vehicle speed.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer/trip meter display change button
P. 178
Odometer and trip meter display
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to
record and display different distances independently.
Tachometer
Displays the engine speed in revolutions per minute.

179 2-2. Instrument cluster
2
When driving
HILUX_OM_OM0K134E_(EE)
The meters illuminate when
Vehicles without optitron type meter
The front position lights is turned on.
Vehicles with optitron type meter
The engine switch is in the “ON” position.
The odometer and trip meter display illuminate when
The engine switch is in the “ON” position.
The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 592)

182 2-2. Instrument cluster
HILUX_OM_OM0K134E_(EE)
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(P. 173)
(if equipped)
Slip indicator
(P. 222)
Headlight high beam
indicator (P. 191)
(if equipped)
VSC OFF indicator
(P. 222)
(optitron type
meters)
Tail light indicator
(P. 191)
(4WD models)
Four-wheel drive
indicator(P. 212)
(if equipped)
Front fog light indicator
(P. 195)
(if equipped)
Rear differential lock
indicator (P. 217)
Rear fog light indicator
(P. 196)
(automatic
transmission)
Shift position indicators
(P. 166)Engine preheating
indicator (P. 162)
(if equipped)
Cruise control indicator
(P. 202)
*1, 2
*1
*1

183 2-2. Instrument cluster
2
When driving
HILUX_OM_OM0K134E_(EE)
Warning lights
Warning lights inform the driver of malfunctions in any of the
vehicle’s systems. (P. 557)
*1: These lights turn on when the engine switch is turned to the “ON” posi-
tion to indicate that a system check is being performed. They will turn
off after the engine is started, or after a few seconds. There may be a
malfunction in a system if a light does not come on, or if the lights do
not turn off. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light flashes to indicate a malfunction.
*4: The light turns to yellow (except for Russia and Ukraine) or flashes (for
Russia and Ukraine) to indicate a malfunction.
(for driver)(for front
passenger)(if equipped)(if equipped)(if equipped)
(if equipped)(if equipped)(if equipped)(4WD models)
*1*1*1*1*1*1*1
*1*1*1*1
*1, 3*1*4*1*3

184 2-2. Instrument cluster
HILUX_OM_OM0K134E_(EE)
CAUTION
If a safety system warning light does not come on
Should a safety system light such as ABS and the SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional immediately
if this occurs.

187 2-2. Instrument cluster
2
When driving
HILUX_OM_OM0K134E_(EE)
Display items
Outside temperature display
Average fuel consumption
Current fuel consumption
Average vehicle speedDisplays the outside temperature.
The temperature range that can be displayed is
from -40°C (-40°F) to 50°C (122°F).
Displays the average fuel consumption since the
engine switch is turned to the “ON” position.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a
reference.
Displays the current rate of fuel consumption.
Displays the average vehicle speed since the
engine switch is turned to the “ON” position.
The function can be reset by pressing the “RESET”
button for longer than 1 second when the average
vehicle speed is displayed.

188 2-2. Instrument cluster
HILUX_OM_OM0K134E_(EE)Elapsed time
Driving range
Compass
P. 459
Display off
A blank screen is displayed.Displays the elapsed time after the engine switch
is turned to the “ON” position.
• When the engine switch is turned on, time is
counted from 0:00. When the time exceeds
19:59, the counter returns to 0:00.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the elapsed time is displayed.
Displays the estimated maximum distance that
can be driven with the quantity of fuel remaining.
• This distance is computed based on your aver-
age fuel consumption. As a result, the actual dis-
tance that can be driven may differ from that
displayed.
• When only a small amount of fuel is added to the
tank, the display may not be updated.

191
2
When driving
HILUX_OM_OM0K134E_(EE)
2-3. Operating the lights and wipers
Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
The front position, tail,
license plate and
instrument panel lights
turn on.
The headlights and all
lights listed above turn
on.
The headlights and all
the lights listed above
turn on and off auto-
matically (when the
engine switch is in the
“ON” position).
(if equipped)

193 2-3. Operating the lights and wipers
2
When driving
HILUX_OM_OM0K134E_(EE)Guide to dial settings
Occupancy and luggage
load conditionsDial position
Left-hand drive vehiclesRight-
hand drive
vehicles
OccupantsLuggage
loadSingle-cab
modelsExtra-cab
modelsDouble-cab
models
Driver None 0 0 0 0
DriverFull
luggage
loading343.55
Daytime running light system (if equipped)
To make your vehicle more visible to other drivers, the headlights turn on
automatically whenever the engine is started. The daytime running light sys-
tem is not designed for use at night.
Headlight control sensor (if equipped)
Light reminder buzzer
A buzzer sounds when the key is removed and the driver’s door is opened
while the lights are turned on.
The sensor may not function properly if
an object is placed on the sensor, or any-
thing that blocks the sensor is affixed to
the windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight sys-
tem to malfunction.

194 2-3. Operating the lights and wipers
HILUX_OM_OM0K134E_(EE)
NOTICE
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run-
ning.