airbag disable TOYOTA LAND CRUISER 1986 Factory Repair Manual

2004 LAND CRUISER (EWD548U)
242SRS
*The SRS airbag are provided for the driver and front passenger. The SRS airbags have been designed to help reducing
the shocks to the heads and chests of the driver and front passenger in the event of a severe frontal impact collision as
supplements to the seat belts.
This system is a 3-sensor type airbag system to detect the impact during a front collision using the center airbag sensor
assembly and airbag sensor front LH, RH, and to make the airbag system and pretensioner operate as well.
*In this system, a front side collision is detected by the side airbag sensor front LH, RH in order to simultaneously deploy
the side and curtain shield airbags. A rear side collision is detected by the side airbag sensor rear LH, RH in order to
deploy only the curtain shield airbag.
*Roll sensing of curtain shield airbags control has been adopted in order to deploy the curtain shield airbags and the
pretensioners for the driver and front passenger, in the event that the vehicle rolls over.
A roll sensing of curtain shield airbags cutoff SW is provided on the driver side of the instrument panel to enable the driver
to disable this system.
*Dual-stage SRS airbags system, that controls the airbag inflating output optimum by judging the extent of impact and seat
position (Driver seat), has been used for the driver and front passenger airbags.
*In accordance with the adoption of the dual-stage SRS airbag system, a seat position sensor has been established for the
driver seat.
*This system has adopted a fuel cut control that stops the fuel pump when the airbag is deployed.
: Parts Location
CodeSee PageCodeSee PageCodeSee Page
A1568C27C70R4071
A1668C2972S1173
A2770C3072S1273
A2870D770S1373
B574E970S1473
B770J771S1774
C12A70J1271S1874
C13B70J1571S1974
C14C70J2272T771
C25A70P2173
C26B70P2273
:Junction Block and Wire Harness Connector
CodeSee PageJunction Block and Wire Harness (Connector Location)
2G28Dash Wire and Cowl Side J/B LH (Left Kick Panel)
2K28Floor No.1 Wire and Cowl Side J/B LH (Left Kick Panel)
2Q30Instrument Panel Integration Wire and Cowl Side J/B LH (Left Kick Panel)
3D
3E40Dash Wire and Cowl Side J/B RH (Right Kick Panel)
3F
(g )
3Q42Instrument Panel Integration Wire and Cowl Side J/B RH (Right Kick Panel)
4C52Dash Wire and J/B No 4 (Instrument Panel Center)4E52Dash Wire and J/B No.4 (Instrument Panel Center)
7B64Dash Wire and J/B No.7 (Behind the Grove Box)
System Outline