EM-17 TOYOTA LAND CRUISER 1998 Factory Repair Manual

A09156
SST
A08597
Turn
A04335
A04337
A04338
String
- ENGINE MECHANICALTIMING BELT
EM-17
1590 Author
: Date
:
2004 LAND CRUISER (RM1071U)
16. LOOSEN CRANKSHAFT PULLEY BOLT
Using SST, loosen the pulley bolt.
SST 09213-7001 1 (90105-70020),
09330-00021
17. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Turn the crankshaft pulley and align its groove with the
timing mark º0º of the No.1 timing belt cover.
(b) Check that the timing marks of the camshaft timing pul-
leys and that of the timing belt rear plates aligned.
If not, turn the crankshaft 1 revolution (360°).
(c) Remove the crankshaft pulley bolt.
NOTICE:
Do not turn the crankshaft pulley.
18. REMOVE TIMING BELT TENSIONER
HINT:

When re-using timing belt:
If the installation marks are disappeared, place 2 new
installation marks on the timing belt to match the timing
marks of the camshaft timing pulleys before the removal.

When replacing timing belt tensioner only:
To avoid meshing of the timing pulley and the timing belt,
secure one of them with string, and then place match-
marks on the timing belt and the RH camshaft timing
pulley.