reset TOYOTA LAND CRUISER 2003 J100 Navigation Manual

123
2003 Land Cruiser 100 Navigation (OM60A00U)
Your vehicle has an electronic tuning radio
(ETR). Tune in the desired station using one
of the following methods.
Preset tuning: Touch the switch (1−6) or
push the ”
” or ”” bu tto n of th e ”CH” button
for the station you want. The switch (1 −6) is
highlighted in green and station frequency
appears on the display.
Manual tuning: Turn the ”TUNE” knob brief-
ly. Each time you turn the knob, the radio will
step up or down to another frequency.
Seek t uning: Push the ”” or ”” button of
the ”SEEK” button and hold it until you hear
a beep. The radio will begin seeking up or
down for a station of the nearest frequency
and will stop on reception. Each time you
push the button, the stations will be searched
out one after another.
UNG612
Scan tuning: Touch the ”SCAN” switch
briefly. ”SCAN” appears on the display. The
radio will find the next station up or down the
band, stay there for a few seconds, and then
scan again. To select a station, touch the
”SCAN” switch a second time.
Preset scan tuning: Touch the ”SCAN”
switch and hold it until you hear a beep. ”P.
SCAN” appears on the display. The radio will
tune in the next preset station up or down the
band, stay there for a few seconds, and then
move to the next preset station. To select a
station, touch the ”SCAN” switch a second
time.
TRAF (T raffic) function: A station that reg-
ularly broadcasts traffic information is
automatically sought.
When you push the ”TRAF” button, ”TRAF
SEEK” appears on the display and the radio
will start seeking any traffic program station.
If any traffic program station is not found,
”NOTHING” appears and the previous mode
returns.
If the traffic program station is found, the
name for traffic program station is displayed
and ”TRAF” is lit for a while until traffic an-
nouncement is received.
(c) Selecting a station(d) RDS (Radio Data System)

124
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG615
When you touch the ”RDS SRCH” switch
during FM reception, ”RDS SEARCH” ap-
pears and the radio starts to search RDS sta-
tion.
If any RDS station cannot be found, ”NO
RDS Stations Found” appears and the pre-
vious mode returns.
If RDS stations are found, the stations are
read and preset by program type. The FM
TYPE mode screen displays the ”** RDS
Stations Found” (** indicates the number of
stations which are found) and then RDS sta-
tions appear in the order of frequency. If in one program type, more than 6 stations
are found, the 6 stations are preset in the or-
der of the lower frequency.
Each time you push the ”
” or ””, the
program type changes as in the following:
 ROCK
 EASY LIS (Easy listening)
 CLS/JAZZ (Classical music and Jazz)
 R&B (Rhythm and Blues)
 INFORM (Information)
 RELIGION
 MISC.
 ALERT (Emergency message)
UNG617
If ”MSG” appears during FM reception,
touching the ”MSG” switch displays the mes-
sage display screen which indicates the text
message from the RDS station.
(e) TYPE (Program type)(f) Radio text message

154
2003 Land Cruiser 100 Navigation (OM60A00U)
Preset Destination Number
One
Preset Destination one
Go to Preset Destination
Number One
Go to Preset Destination
One
Calculates route to preset des-
tination 1.
Preset Destination Number
Tw o
Preset Destination Two
Go to Preset Destination
Number Two
Go to Preset Destination
Tw o
Calculates route to preset des-
tination 2.
Preset Destination Number
Three
Preset Destination Three
Go to Preset Destination
Number Three
Go to Preset Destination
Three
Calculates route to preset des-
tination 3.
Preset Destination Number
Four
Preset Destination Four
Go to Preset Destination
Number Four
Go to Preset Destination
Four
Calculates route to preset des-
tination 4.
Preset Destination Number
Five
Preset Destination Five
Go to Preset Destination
Number Five
Go to Preset Destination
Five
Calculates route to preset des-
tination 5.
Destination 2–––To enter a destination from the listCommand
Action
Go to Previous Destination
Previous DestinationShows previous destination list.