buttons TOYOTA LAND CRUISER 2003 J100 Navigation Manual

MAP/VOICE buttonTouch this button to
repeat voice guidance,
cancel one touch scroll
and start guidance. For
details, see page 34.
DEST button
Push this button to
display the Destination
screen. For details, see
page 4.
MENU button
Push this button to display the Menu
screen. This screen allows you to make
adjustments or correct settings of various
options and functions.
DISPLAY button
Push this button to
display the Display
screen. For details, see
page 103.
INFO button
Push this button to
display the Information menu screen. For
details, see page 88. GPS (Global
Positioning System)
mark
Whenever your vehicle
is receiving signals
from the GPS, this
mark is displayed. For
details, see page 50.
Map/Guidance
Touch this switch to
change the screen
mode. For details, see
page 28.
Current vehicle
position mark
Indicates the current
position. For details,
see page 34.
Current street name
Turn on this function
to indicate the current
street name. For
details, see page 87.
Northup or Headingup symbol and Scale of map
Indicates a map view with north up or heading up.
Touching this symbol changes the map orientation. The
figure also indicates the map scale. For details, see
page 49.
Distance and time to destination
Displays the distance and the estimated travel time to the
destination. If you input more than two destinations, it displays
the distance and time to the next destination. Touching this
indication will change it to the distance and time to the other
destinations. The direction will be indicated when your vehicle
is off the route.
viii
2003 Land Cruiser 100 Navigation (OM60A00U)
Symbols, Switches and Buttons

108
2003 Land Cruiser 100 Navigation (OM60A00U)
The automatic air conditioning auto-
matically maintains the set tempera-
ture.
This air conditioning features automatic
fan speed and air flow control which auto-
matically selects the most suitable fan
speed and air flow to control the tempera-
ture. The ignition key must be in the ”ON”
position.
CLIMATE: Push this button to display
switches for automatic air conditioning con-
trols.
NOTICE
To prevent the battery from being dis-
charged, do not leave the air condition-
ing on longer than necessary when the
engine is not running.
SETTING OPERATION automatic con-
trol
1. Push the ”AUTO” button.
Air flow quantity, switching of the diffusers,
on−off of the air conditioning, and switching
of the air intake between RECIRCULATED
AIR and OUTSIDE AIR are automatically ad-
justed. The operation status is shown by
each indicator.
When one of the manual control buttons is
depressed while operating in automatic
mode, the mode relevant to the depressed
button is set. Other conditions continue to be
adjusted automatically. Push
the ”OFF” button to turn the air condi-
tioning off.
It is recommended that you close the lower
vent. For details about this, see page 113.
(a) Climate control

109
2003 Land Cruiser 100 Navigation (OM60A00U)
UNC502
2. Use the ”TEMP” button to set the de-
sired temperature.
The ”TEMP” button is used to set the de-
sired passenger compartment temperature.
The temperature of air delivered to the pas-
senger compartment will be controlled auto-
matically according to the setting. SETTING OPERATION manual control
When one of the manual control buttons
is depressed while operating in automat-
ic mode, the mode relevant to the de-
pressed button is set. Other conditions
continue to be
adjusted automatically.
If manual air flow selection is desired
The outlets from which air is delivered can be
selected manually by touching the switch.
The function of each mode is as follows:
1 Panel − Air flows mainly from the instru-
ment panel vents.
2 Bilevel − Air flows from both the floor
vents and the instrument panel vents.
3 Floor − Air flows mainly from the floor
vents.
It is recommended that you close the lower
vent. For details about this, see page 113.
4 Floor/Windshield Air flows mainly
from the floor vents and windshield
vents.
It is recommended that you close the lower
vent. For details about this, see page 113.
The selected mode is highlighted in green.
If quick heating or cooling is desired
UNC502
Push the ”TEMP” button on either side and
hold it until the maximum figure or minimum
figure appears.

11 8
2003 Land Cruiser 100 Navigation (OM60A00U)
Push the ”AM”, ”FM”, ”TAPE” or ”DISC”
button to turn on that mode. The selected
mode turns on directly.
Push these buttons if you want to switch from
one mode to another.
If the tape or disc is not set, the cassette play-
er or compact disc player does not turn on.
You can turn off the cassette player by eject-
ing the cassette tape. If the audio system
was previously off, then the entire audio sys-
tem will be turned off when you eject the cas-
sette tape. If another function was previously
playing, it will come on again.
UNG604
UNG605
The switches for radio, cassette tape and
disc player operation are displayed on
the liquid crystal display. Touch them
lightly and directly on the screen.

122
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG610
Push these buttons to choose either an
AM or FM station.
”AM”, ”FM1”, ”FM2” or ”FM TYPE” appears
on the display.
Turn this knob to step up the station band
or to step down.
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. ”ST” appears on the display. If the
signal becomes weak, the radio reduces the
amount of channel separation to prevent the
weak signal from creating noise. If the signal
becomes extremely weak, the radio
switches from stereo to mono reception. In
this case, ”ST” disappears from the display.
UNG604
1. Tune in the desired station.
2. Touch one of the station selector
switches (16) and hold it until a beep is
heard. This sets the station to the switch
and the frequency appears on the switch.
Each switch can store FM1, FM2 and AM. To
change the preset station to a different one,
follow the same procedure.
The preset station memory is cancelled
when the power source is interrupted by bat-
tery disconnection or a blown fuse.
Radio operation
(a) Listening to the radio(b) Presetting a station