seats TOYOTA LAND CRUISER 2008 J200 Navigation Manual

AIR CONDITIONING
247
2. Use the “TEMP” or “TEMP” but-
ton to set the desired vehicle interior
temperature.
The “TEMP
” or “TEMP” selector
button is used to set the desired interior
temperature. The interior temperature will
be controlled on the driver and passenger
side room zones simultaneously or individ-
ually.
To increase the interior temperature, push
the “TEMP
” side, to decrease it, push
the “TEMP” side.
If quick heating or cooling is desired —
“LO” appears when you hold it until maxi-
mum cooling (decrease), and “HI” appears
when you hold it until maximum warming
(increase).
“TEMP
” or “TEMP” button for the
driver’s side— Changes the temperature
on the driver and passenger sides simulta-
neously or the driver side only.
“TEMP
” or “TEMP” button for the
passenger’s side— Changes the tem-
perature settings separate from the driver
side.
“4 ZONE” —
This button is used to set the temperatures
independently for the driver’s, front pas-
senger’s and rear seats.
Touching the button changes from the in-
dependent mode to the linked mode.
Independent mode: Temperatures can
be set independently for the driver’s, front
passenger’s and rear seats. The indicator
will come on to show that the independent
mode has been selected.
Linked mode: The same temperature is
set for the driver’s seat and front passen-
ger’s seat. The indicator will come off to
show that the simultaneous temperature
setting mode has been selected.
When the temperature for the front pas-
senger’s seat is changed in linked mode,
the mode is changed automatically to inde-
pendent mode.

AIR CONDITIONING
250
If manual onoff of the air conditioning
is desired —
Touch “A/C” to turn the air conditioning on
and touch it again to turn the air condition-
ing off.
The air conditioning does not work if the
outside temperature is lowered down to
around 0C (32F).
If the system is used for ventilation, heat-
ing in dry weather or removing frost or ex-
terior fog on the windshield, turn the air
conditioning off once it is no longer re-
quired. This will improve fuel economy.
The air conditioning can be used for year−
round automatic temperature control in-
cluding cooling and dehumidifying opera-
tion.(b) Rear air conditioning controls 1 “Rear OFF” button

2 Temperature control

3 Fan speed control
The temperature for the right−hand and
left−hand rear seats can be adjusted sepa-
rately. Touch “
” or “” to increase or de-
crease the temperature.
The fan speed can be set to your desired
speed by touching the appropriate fan
speed control button.
The higher the fan speed is, the more air is
delivered.
Touch “Rear OFF” to turn the fan off.
To remove the exterior windshield frost
and interior windshield fog, use the high
speed setting.
The selected mode is highlighted.