fuel TOYOTA LAND CRUISER 2008 J200 User Guide

141
2−1. Driving procedures
2
When driving
nDriving in the rain
lDrive carefully when it is raining, because visibility will be reduced, the
windows may become fogged−up, and the road will be slippery.
lDrive carefully when it starts to rain, because the road surface will be
especially slippery.
lRefrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road
surface, preventing the steering and brakes from operating properly.
nBreaking in your new Toyota
To extend the life of the vehicle, the following precautions are recommended
to observe:
lFor the first 200 miles (300 km):
Avoid sudden stops.
lFor the first 500 miles (800 km):
Do not tow a trailer.
lFor the first 1000 miles (1600 km):
Do not drive at extremely high speeds.
Avoid sudden acceleration.
Do not drive continuously in the low gears.
Do not drive at a constant speed for extended periods.
nDrumindisc type parking brake system
Your vehicle has a drum−in−disc type parking brake system.
This type of brake system needs bedding−down of the brake shoes periodi−
cally or whenever the parking brake shoes and/or drums are replaced.
Have your Toyota dealer perform the bedding−down.
nOperating your vehicle in a foreign country
Comply with the relevant vehicle registration laws and confirm the availability
of the correct fuel. ( P. 496)

154 2−1. Driving procedures
nShift position uses
*1: To improve fuel consumption and reduce noises, set the shift lever in
the “D” position for normal driving.
*2: By selecting shift ranges using “S” mode, you can control engine brak−
ing forces.
nSelecting a driving mode
The following patterns can be selected to suit current driving and
operating conditions.
Power mode
For powerful acceleration and
driving in mountainous
regions.
Normal mode
Second start mode
For starting on slippery road
surfaces, such as on snow.
Press “2nd” to return to normal
mode.
Shift positionFunction
PParking the vehicle or starting the engine
RReversing
NNeutral
DNormal driving*1
S“S” mode driving *2
ETC PWR2nd
PWR2ndPWR2ndPWR2nd
ECT
PWR2nd
STRT
ITY21C007

160
2−2. Instrument cluster
Gauges and meters
The following gauges, meters and display illuminate when the
“ENGINE START STOP” switch is in IGNITION ON mode.
Tachometer
Displays the engine speed in revolutions per minute.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Speedometer
Displays the vehicle speed.
Vo l t m e t e r
Displays the charge state.
Multi−information display
P. 166

166
2−2. Instrument cluster
Multi−information display
The Multiinformation di splay presents the driver with a variety of
drivingrelated data.
lTrip information ( P. 167)
Displays driving range, fuel
consumption and other cruis−
ing−related information.
lToyota park assist system
display (
P. 181)
Automatically displayed when
using Toyota park assist sys−
tem.
lCrawl control display
(
P. 197)
Automatically displayed when
using crawl control.
lShift position and shift
range (
P. 153)
l
Warning messages
( P. 460)
Automatically displayed when
a malfunction occurs in one of
the vehicle’s system.

167
2−2. Instrument cluster
2
When driving
Switch the display
Display items can be switched
by pressing the “DISP” button.
Trip information
nCurrent fuel consumption
Displays the current rate
of fuel consumption.
nAverage fuel consumption
Displays the average fuel consum
ption since the vehicle was last
refueled.

168 2−2. Instrument cluster
nDriving range
Displays the estimated maximum di
stance that can be driven with
the quantity of fuel remaining.
lThis distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis−
played.
lWhen only a small amount of fuel is added to the tank, the display may
not be updated.
nAverage vehicle speed
Displays the average vehicle speed since the engine was started.
nDriving distance
Displays the driving distance since the engine was started.
nTire inflation pressure (If equipped)
Displays inflation pressure of ea
ch tire. There is no correlation
between the order of the displayed values and the tire positions.
It may take a few minutes to display the tire inflation pressure after the
“ENGINE START STOP” switch is turned to IGNITION ON mode. It may
also take a few minutes to display the tire inflation pressure after inflation
pressure has been adjusted.

214
2−5. Driving information
Cargo and luggage
Take notice of the following information about storage precau
tions, cargo capacity and load.
lStow cargo and luggage in the luggage compartment when−
ever possible. Be sure all items are secured in place.
lBe careful to keep the vehicle le vel. Placing the weight as far
forward as possible helps maintain vehicle balance.
lFor better fuel economy, do not carry unnecessary weight.
n
Roof luggage carrier
Roof rails
Cross rails
1
2
ITY25C039

227
2−5. Driving information
2
When driving
Trailer towing
Your vehicle is designed primarily as a passengerandload car
rying vehicle. Towing a trailer will have an adverse effect on han
dling, performance, braking, durability, and fuel consumption.
For your safety and the safety of others, do not overload the vehi
cle or trailer.
To tow a trailer safely, use extreme care and drive the vehicle in
accordance with the trailer ’s characteristics and operating condi
tions.
The vehicle stability and braking performance are affected by
trailer stability, brake setting and performance, and the hitch.
Toyota warranties do not apply to damage or malfunction caused
by towing a trailer for commercial purposes.
Contact your Toyota dealer for fu rther information about additional
requirements such as a towing kits, etc.

360
4−1. Maintenance and care
Cleaning and protecting the vehicle exterior
nAutomatic car washes
lFold the mirrors back and retract the antenna before washing the vehicle.
lBrushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
nHigh pressure car washes
lDo not allow the nozzles of the car wash to come within close proximity
of the windows.
lBefore car wash, check that the fuel filler door is closed.
nAluminum wheels
Remove any dirt immediately by using a neutral detergent. Do not use hard
brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners.
Use the same mild detergent and wax as used on the paint.
nBumpers and side moldings
Do not scrub with abrasive cleaners. Perform the following to protect the vehicle and maintain it in prime
condition.
lWorking from top to bottom, liberally apply water to the vehicle
body, wheel wells and underside of the vehicle to remove any
dirt and dust.
Wash the vehicle body using a sponge or soft cloth, such as a cham−
ois.
lFor hard−to−remove marks, use car wash soap and rinse thor−
oughly with water.
lWipe away any water.
l
Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehi−
cle body is cool.

366 4−2. Maintenance
nAllow inspection and repairs to be performed by a Toyota dealer
lToyota technicians are well−trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
l
Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it.
CAUTION
nWarning in handling of battery, oils, fuels, and fluids
lEngine exhaust, some of its constituents, and a wide variety of automobile
components contain or emit chemicals known to the State of California to
cause cancer and birth defects and other reproductive harm. Work in a
well ventilated area.
lOils, fuels and fluids contained in vehicles as well as waste produced by
component wear contain or emit chemicals known to the State of Califor−
nia to cause cancer and birth defects or other reproductive harm. Avoid
exposure and wash any affected area immediately.
lBattery posts, terminals and related accessories contain lead and lead
compounds which are known to cause brain damage. Wash your hands
after handling. (
P. 387)