fuel filter location TOYOTA LAND CRUISER 2010 J200 Owners Manual

545
6-1. Specifications
6
Vehicle specifications
L/C200_U
Lubrication system
*1: Vehicles with a blue-markered dipstick handle
*2: Vehicles with a green-markered dipstick handle
(Location of the marker: P. 430)
■Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toy-
ota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the
following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 5W-20 or 0W-20
SAE 5W-20 or 0W-20 engine oil
may be used. However, SAE
0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
The 0W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehi-
cle is operated at high speeds, or under extreme load conditions.
Oil capacity
Drain and refill
(Reference)
With filter
Without filter7.4 qt. (7.0 L, 6.2 Imp.qt.)*1
7.9 qt. (7.5 L, 6.6 Imp.qt.)*2
7.0 qt. (6.6 L, 5.8 Imp.qt.)*1
7.5 qt. (7.1 L, 6.2 Imp.qt.)*2
Outside temperature

592
L/C200_U
GAS STATION INFORMATION
Auxiliary catch leverP. 4 2 7Fuel filler doorP. 9 2
Hood lock release lever
P. 427
Fuel filler door opener
P. 9 2
Tire inflation pressure
P. 550
*1: Vehicles with a blue-markered dipstick handle
*2: Vehicles with a green-markered dipstick handle
(Location of the marker: P. 430)
Fuel tank capacity24.6 gal. (93 L, 20.5 lmp.gal.)
Fuel typeUnleaded gasoline only P. 93, 544
Cold tire inflation
pressureP. 5 5 0
Engine oil capacity
drain and refill
(Reference)
qt. (L, Imp.qt.)
With filter 7.4 (7.0, 6.2)
*1
7.9 (7.5, 6.6)*2
Without filter 7.0 (6.6, 5.8)*1
7.5 (7.1, 6.2)*2
Engine oil type“Toyota Genuine Motor Oil” or equivalent
Oil grade: ILSAC multigrade engine oil P. 545