ignition TOYOTA LAND CRUISER 2021 Owners Manual (in English)

19
Moonroof
Automatic mode
Open
Tilt
CloseClose
Recommended open position to minimize
wind noise.
Push once to open partway.
Push again to open completely.
The vehicle must be in the “ACCESSORY” or “IGNITION ON” mode\
for use.
Linked mirror function when reversing
The outside rear view mirrors automatically
angle downwards when vehicle is in reverse. Will only operate when switc\
h is in “L”
or “R” position.
SLIDING OPERATION TILTING OPERATION
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Push once to open completely.
Lightly press either side of the moonroof switch while opening/tilting i\
s in progress,
the moonroof stops partway.
Rear view mirror-Outside

31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Rear seat entertainment system (if equipped)
Front audio system (DVD player) Displays
Remote control
Headphone volume control and headphone jacks
A/V input port
(VTR and HDMI port)
For details, refer to the “Navigation System Owner’s Manual.”
Power outlets-12V DC
The vehicle must be in “ACCESSORY” or “IGNITION ON” mode for\
use.
FrontRear
Power outlet-120V AC
The vehicle must be on for use.

32
Qi Wireless charger
Parking brake
FEATURES & OPERATIONS
(2) Push
SetRelease
(1) Pull slightly
(3) Lower
Pull
A mobile device can be charged wirelessly on the tray. After press the l\
id to open,
(1) Press the wireless charger power switch and the green operation indicat\
or
light turns on. (2) Place a compatible mobile device on the tray as shown in the
illustration. An amber indicator illuminates while charging is in progre\
ss. When
charging is complete, the indicator illuminates green. Some phones, case\
s or cover
type wireless chargers may not cause the green indicator to illuminate e\
ven though
it is fully charged.
The vehicle must be in “ACCESSORY” or “IGNITION ON” mode for\
use.
Refer to the Owner’s Manual for limitations and more details on this \
system before
attempting to use it.
Power switch
Charge area
Operation indicator
light
Press (1)
When the engine is turned off, the last state (ON/
OFF) of the charger is memorized.
Place device nearest the center of charging area for
best results. Moving device may result in stopping
or restarting the charging process.
Place (2)

39
ADJUSTING LDA ALERT SENSITIVITY
SWAY WARNING SYSTEM
The sway warning function can detect swaying based on the vehicle locati\
on in the
lane and the driver’s steering wheel operation. To help prevent swayi\
ng, the system
alerts the driver using a buzzer sound and a warning display in the MID.\
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The driver can adjust the sensitivity of the LDA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press “
” switches and select “” from the Multi-Information Display (MID).
(2) Use “
” switch and select “” and then press “.” The setting screen
is displayed.
(3) Use “
” switch and select “Alert sensitivity” and then press “” to select
the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

40
TOYOTA SAFETY SENSE™
DISABLING LDA SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY
(1) Press “” switches and select “” from the Multi-Information Display (MID).
(2) Use “
” switch and select “” and then press “.” The setting screen
is displayed.
(3) Use “
” switch and select “Sway sensitivity” and then press “” to select
the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it. (1) Press “
” switches and select “” from the Multi-Information Display (MID).
(2) Use “
” switch and select “” and then press “.” The setting screen
is displayed.
(3) Use “
” switch and select “Sway warning” and then press “” to select
the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

47
Safety Connect®
Safety Connect is a subscription-based telematics service that uses Glob\
al
Positioning System (GPS) data and embedded cellular technology to provide safety
and security features to subscribers. Safety Connect is staffed with liv\
e agents at
the Toyota response center, which operates 24 hours per day, 7 days per \
week.
Services for subscribers include:
• Automatic collision notification
• Stolen vehicle locator
• Emergency assistance (“SOS” button)
• Enhanced roadside assistance
Microphone
LED light indicators
(Green is Active)
“SOS” button
For additional information, refer to the “Owner’s Manual” or vi\
sit www.Toyota.com/
connected-services.
Tire Pressure Monitoring (warning) System (TPMS)
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait several minutes to allow initialization to complete.
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire pressure indicator flashes for 1 minute and then remains on,\
take the
vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not\
been
initialized recently, setting the tire pressures to factory specificatio\
ns should
turn off the light.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES