display TOYOTA MATRIX 2003 E130 / 1.G Owner's Manual

’03 MATRIX_U (L/O 0201)
1302003 MY COROLLA MATRIX_U (OM12767U)
Ta l k
Rock
Cls Rck (Classic rock)
Adlt Hit (Adult Hits)
Soft Rck
To p 4 0
Country
Oldies
Soft
Nostalga (Nostalgia)
Jazz
classicl (Classical)
R & B
Soft R & B
Language
Rel Musc (Religious Music)
Rel Talk (Religious Talk)
Persnlty (Personality)
Public
College
WeatherInterrupt function
If the radio in on the compact disc mode,
the radio will switch to the FM band with
the previous interrupt volume. The pro-
gram type and “Int” will appear. If the
radio in on the FM mode, the volume will
be adjusted to the previous interrupt vol-
ume. To cancel the interrupt function,
press “P·TYPE” or the selected mode but-
ton.
If the radio in on the PTY mode, program
types, except Any Type, may be selected
as interrupts. To set a program type as an
interrupt, push and hold “P·TYPE” while a
program type is displayed until you hear
a beep. The asterisk will appear when an
interrupt is set.
To turn off an interrupt while the radio in
on the PTY mode, select the program type
marked with an asterisk. Push and hold
“P·TYPE” until you hear a beep. The as-
terisk will disappear.
Note: ALERT! is a special program type
interrupt that is always on. If an emergen-
cy broadcast is received during reception
of anything other than AM broadcasting,
“ALERT” appears on the display and the
system adjust the volume to the interrupt
volume. Setting a PTY station
Program types can be stored to the preset
buttons. For details, see “1 2 3 4 5 6
(Preset or disc selection buttons)”.
Seeking a PTY station
If the radio is in the PTY mode, it will find
and play the next station up or down the
station band within the same program
type. If no PTY station will be found,
“NOT FOUND” will appear on the display
and the radio will return to the previous
frequency.
For details, see “SEEK”.
Scanning a PTY station
If the radio is in the PTY mode, it will
tune in the next station within the same
program type.
For details, see “SCAN”.
RCL (Recall)
This button is designed to change the dis-
play in each mode. You can also display
the clock by pushing this button when the
ignition switch is off.

’03 MATRIX_U (L/O 0201)
1312003 MY COROLLA MATRIX_U (OM12767U)
Radio
Push the “RCL” button to change the dis-
play among frequency, program service
name, and program type while receiving
RDS stations. To change what is normally
shown on the display, push this button
until you see the display you want, then
push and hold this button until the display
flashes and you hear a beep.
Compact disc auto changer
Push the “RCL” button to see how long
the current track has been playing. To
change what is normally shown on the
display (track number or elapsed time),
push this button until you see the display
you want, then push and hold this button
until the display flashes and you hear a
beep.RDM (Random)
There are two random features—you can
either listen to the tracks on all the com-
pact discs in the changer in random order,
or only listen to the tracks on a specific
compact disc in random order.
To randomly play the tracks on a disc:
Push and hold the “RDM” button until
“RANDOM ONE” appears on the display
and you hear a beep. The disc you are
listening to will play in random order. To
turn off the random feature, push this but-
ton again.
To randomly play all the tracks in the
changer:
Quickly push and release the “RDM” but-
ton. “RANDOM ALL” will appear on the
display and the auto changer will perform
all the tracks on all the discs in the
changer in random order. If you hear a
beep, the auto changer will perform all the
tracks on all the discs in the changer. To
turn off the random feature, push this but-
ton again.RPT (Repeat)
There are two repeat features—You can
either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release the “
” but-
ton while the track is playing. “REPEAT
TRACK” will appear on the display. If you
push and hold the button, the auto chang-
er will repeat the whole disc. When the
track ends, it will automatically replay. To
turn off the repeat feature, push this but-
ton again.
Repeating a disc:
Push and hold the “
” button until
“REPEAT CD” appears on the display. The
auto changer will repeat all the tracks on
the disc you are listening to. When the
disc ends, the auto changer will automati-
cally go back to the top track of the disc
and replay. To turn off the repeat feature,
push this button again.

’03 MATRIX_U (L/O 0201)
1322003 MY COROLLA MATRIX_U (OM12767U)
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold either side of the “SEEK/
SCAN” button for more than 4 seconds
until “PRESET SCAN” appears on the dis-
play and you hear two beeps. The radio
will tune in the next preset station up the
band, stay there for 5 seconds, and then
move to the next preset station. To cancel
scan and remain on current station, push
this button again.
To scan all the frequencies:
Push and hold either side of the “SEEK/
SCAN” button for about two seconds until
“SC” appears on the display and you hear
a beep. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again to the next
preset. To cancel scan and remain on cur-
rent station, push this button again. If you
hear two beeps, the radio will scan the
preset stations.
You can also scan only to stations with
the types of programs you want to listen
to or traffic announcements. (See
“P.TYPE”.)Compact disc auto changer
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
changer.
Scanning the tracks on a disc:
Push and hold either side of the “SEEK/
SCAN” button for about two seconds until
“SCAN” appears on the display and you
hear a beep. The auto changer will scan
all the tracks on the disc you are listening
to. If you hear two beeps, the auto chang-
er will scan the first track of all the discs
in the changer. To select a track, push
either side of this button again.
Scanning the first track of all the discs in
the changer:
Push and hold either side of the “SEEK/
SCAN” button for more than 4 seconds
until “DISC SCAN” appears on the display
and you hear two beeps. The auto chang-
er will scan the first track of the next
disc. To select a disc, push either side of
this button again.
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek the next station, quickly push and
release either side of the “SEEK/SCAN”
button. If you hear a beep, the radio will
scan the stations. (See “SCAN”.) Do this
again to find the station after that.
You can also seek only to stations with
the types of programs you want listen to
or traffic announcements. (See “P.TYPE”.)
Compact disc auto changer
By using this button, you can skip up or
down to a different track.
Push either side of the “SEEK/SCAN” but-
ton repeatedly until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
“
” button one time.

’03 MATRIX_U (L/O 0201)
1332003 MY COROLLA MATRIX_U (OM12767U)
SONG LIST
This integrated sixdisc compact disc auto
changer has a feature called song list.
This feature is capable of saving 20 track
selections.
To save tracks into the song list feature,
perform the following steps:1. Turn the compact disc player on and load it with at least one disc. (See
“LOAD”.)
2. Make sure the disc changer is not in song list mode. “SLIST” should not
appear in the display. If “SLIST” is
present, push the “SONG LIST” button
to turn it off.
3. Select the desired disc by pushing the numbered button and then use the right
side of the “SEEK/SCAN” button to lo-
cate the track you want to save. The
track will begin to play.
4. To save the track, push and hold the “SONG LIST” button until you hear two
beeps.
5. Repeat step 3 and 4 for saving other selections.
If you try to save more than 20 selec-
tions, “SLIST FULL” will appear on the
display. To play the song list, push the “SONG
LIST” button. One beep will be heard and
“SLIST” will appear on the display. The
recorded tracks will begin to play in the
order that they were saved.
You may seek through the song list by
using the “SEEK/SCAN” button. Seeking
past the last saved track will return to the
first saved track.
To delete tracks from the song list, per-
form the following steps:
1. Turn the disc player on.
2. Push the “SONG LIST” button to turn the song list on. “SLIST” will appear
on the display.
3. Push either side of the “SEEK/SCAN” button to select the desired track to be
deleted.
4. Push and hold the “SONG LIST” button for more than two seconds until you
hear a beep. After two seconds of
pushing the button continuously, two
beeps will be heard to confirm that the
track has been deleted.
After a track has been deleted, the re-
maining tracks are moved up the list.
When another track is added to the song
list, the tracks will be added to the end
of the list. To delete the entire song list, perform the
following steps:
1. Turn the disc player on.
2. Push the “SONG LIST” button to turn song list on. “SLIST” will appear on
the display.
3. Push and hold the button for more than 4 seconds. A beep will be heard, fol-
lowed by two beeps after two seconds
and a final beep will be heard after 4
seconds. “SLIST EMPTY” will appear
on the display indicating that the song
list has been deleted.
If a disc is ejected, and the song list
contains saved tracks from that disc,
those tracks are automatically deleted
from the song list. Any tracks saved to
the song list again are added to the bot-
tom of the list.
To end the song list mode, push the
“SONG LIST” button. One beep will be
heard and “SLIST” will be removed from
the display.

’03 MATRIX_U (L/O 0201)
1342003 MY COROLLA MATRIX_U (OM12767U)
TRAF (Traffic)
This button turns the traffic announcement
(TA) feature on and off.
By pushing “< >” button, “TRAF” appears
on the display and the radio will start
seeking any traffic program station.
When a traffic program station is found,
“TRAF” will be displayed (). If no
traffic program stations are found, “No
Traffic” will appear on the display.
After the traffic announcement program is
over, the display returns to the previous
mode.
If no traffic program station is found, “No
Traffic” will appear on the display for 5
seconds and the display returns to the
previous mode. If the “TRAF” button is
pushed when the compact disc player is
on, the radio will start seeking traffic pro-
gram stations.
When a “TA” is received, the radio stores
the volume of the previous mode and ad-
justs the volume to the previous interrupt
volume. During the traffic announcement,
you can adjust the volume using the
“PWR/VOL”.The adjusted volume will be used as the
new default interrupt volume. The interrupt
volume has a minimum default setting.
The stored interrupt volume will be the
greater of the current volume and the
minimum default setting. After an interrupt,
the radio system will return to the volume
that was active before the interrupt.
TUNE (Tuning)
Your Toyota has an electronic tuning radio
(ETR). Turn the knob clockwise to step up
the frequency. Turn the knob counterclock-
wise to step down the frequency.NOTICE
To ensure correct audio system op-
erations:

Be careful not to spill beverages
over the audio system.
 Do not put anything other than a
cassette tape or Compact Disc into
the slot.
 The use of a cellular phone inside
or near the vehicle may cause a
noise from the speakers of the au-
dio system which you are listening
to. However, this does not indicate
a malfunction.
RADIO RECEPTION
Usually, a problem with radio reception
does not mean there is a problem with
your radio—it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain
can interfere with FM reception. Power
lines or telephone wires can interfere with
AM signals. And of course, radio signals
have a limited range. The farther you are
from a station, the weaker its signal will
be. In addition, reception conditions
change constantly as your vehicle moves.
Car audio system operating
hints

’03 MATRIX_U (L/O 0201)
1502003 MY COROLLA MATRIX_U (OM12767U)
Ty p e A
Ty p e B
The digital clock indicates the time
when the key is in the “ACC” or “ON”
position. Even when the ignition switch
is off, you can turn on the clock dis-
play for a few seconds by pushing the
“RCL” button.
Type A—To set the time, push and hold
the “HR” or “MIN” button until the “:”
starts flashing. Then set the time by push-
ing the “HR” (hour) and the “MIN” (minute)
buttons. If the time is before 12 noon,
“AM” appears on the display when the
time being set.
Type B—To set the time, push and hold
the “H” or “M” button until the “:” starts
flashing. Then set the time by pushing the
“H” (hour) and the “M” (minute) buttons.
When the time is being set, “AM” or “PM”
appears on the display.
RDS CLOCK UPDATE FUNCTION
You can update the clock with RDS
(Radio Data System) data. Push and hold
the “HR” and “MIN” (type A) or “H” and
“M” (type B) buttons at least 2 seconds
while receiving an RDS station. “TIME
UPDATED” will appear on the display with
a beep and the clock will be updated. If
setting could not be completed
successfully, “NO UPDATED” will appear
on the display.
CIGARETTE LIGHTER
To use the cigarette lighter, press it in.
After it finishes heating up, it automati-
cally pops out ready for use.
If the engine is not running, the key must
be in the “ACC” position.
Do not hold the cigarette lighter pressed
in.
Use a Toyota genuine cigarette lighter or
equivalent for replacement.
ClockCigarette lighter and portable
ashtray

’03 MATRIX_U (L/O 0201)
1532003 MY COROLLA MATRIX_U (OM12767U)
Close the power outlet lid when the
power outlet is not in use. Inserting
a foreign object other than the ap-
propriate plug that fits the outlet
may cause electrical failure or short
circuits.
The power outlet is not designed for
the following electric appliances even
though their power consumption is un-
der 115 VAC/100W. These appliances
may not operate properly.
Appliances with high initial peak watt-
age: cathoderay tube type televisions,
compressordriven refrigerators, electric
pumps, electric tools, etc.
Measuring devices which process pre-
cise data: medical equipment, measur-
ing instruments, etc.
Other appliances requiring an extremely
stable power supply: microcomputer
controlled electric blankets, touch sen-
sor lamps, etc.
Certain electrical appliances may cause
radio noise.
The direction is indicated on the inside
rear view mirror.
If the ignition switch was turned off with
the system on, the system will automati-
cally turn back on when the ignition switch
is turned on.
To turn on the compass, push and hold
the “
” switch until the display turns
on.
To turn off the compass, push and hold
the “
” switch until the display turns
off. The compass indicates the direction
that the vehicle is heading. In the
above case, it shows that the vehicle is
heading north.
Displays
Directions
N
NE E
SE
S
SW W
NWNorth
Northeast East
Southeast
South
Southwest West
Northwest
The compass may not show the correct
direction in the following conditions:
The vehicle is stopped immediately af-
ter turning.
The compass does not adjust while the
vehicle is stopped.
The ignition switch is turned off imme-
diately after turning.
The vehicle is on an inclined surface.
Compass

’03 MATRIX_U (L/O 0201)
1542003 MY COROLLA MATRIX_U (OM12767U)
The vehicle is in a place where the
earth’s magnetic field is subject to in-
terference by artificial magnetic fields
(underground parking, under a steel
tower, between buildings, roof parking,
near a crossing, near a large vehicle,
etc.).
The vehicle is magnetized. (There is a
magnet or a metal object on or near
the inside rear view mirror.)
The battery has been disconnected.
Your vehicle is out of the set zone. Refer
to the “CALIBRATING THE COMPASS” be-
low to set the zone number.
The compass works to calibrate the direc-
tion automatically while the vehicle is in
motion, if deviation is small.
For additional precision or for complete
calibrating, see “CALIBRATING THE
COMPASS” below.
Compass sensor
The compass sensor is in the inside
rear view mirror.
NOTICE
Do not put magnets or a metal object
on or near the inside rear view mirror
of the vehicle. Doing this may cause
malfunction of the compass sensor.
CALIBRATING THE COMPASS (deviation
calibration)
The direction display on the compass
deviates from the true direction deter-
mined by the earth’s magnetic field. The
angle of deviation varies according to the
geographic position of the vehicle.
To adjust this deviation, stop the vehicle,
then push and hold the both personal light
switches until the zone number appears
on the display. Then push the right side
or left side personal light switch, referring
to the following map to select the number
of the zone where the vehicle is.

’03 MATRIX_U (L/O 0201)
1552003 MY COROLLA MATRIX_U (OM12767U)
Zone number
After calibration, leaving the system for
several seconds returns it to the compass
mode.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
Hawaii: 5
Samoa: 5
Guam: 8
Saipan: 8

’03 MATRIX_U (L/O 0201)
1562003 MY COROLLA MATRIX_U (OM12767U)
CALIBRATING THE COMPASS (circling
calibration)
Sometimes the direction display on the
compass may not change after a turn. To
rectify this, stop the vehicle and push and
hold the both personal light switches until
“C” appears on the display.
If “C” appears on the display because of
a drastic change in the magnetic field,
perform circling calibration.Drive the vehicle in a circle at 8 km/h (5
mph) or less. If there is not enough space
to drive in a circle, drive around the
block.
After driving 1 to 3 circles in the above
method, calibration is completed when the
direction is shown on the display.
If calibration cannot be performed because
of the magnetized vehicle etc., take your
vehicle to Toyota dealer.Perform circling calibration just after
you have purchased your Toyota. And
then always perform circling calibration
after the battery has been removed, re-
placed or disconnected.
Do not perform circling calibration of
the compass in a place where the
earth’s magnetic field is subject to in-
terference by artificial magnetic fields
(underground parking, under a steel
tower, between buildings, roof parking,
near a crossing, near a large vehicle,
etc.).
During calibration, do not operate elec-
tric systems (moon roof, power win-
dows, etc.) as they may interfere with
the calibration.