headlight aiming TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual

2292003 MR2 from Aug. ’03 Prod. (OM17511U)
SB73044a
2. Release the bulb retaining springand remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
SB73075a
3. Install the rubber cover as shown and fit it securely on the boss. Plug
in the connector.
Make sure the rubber cover fits securely
on the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
—H ead lig h t s (h ig h beam)
SB73077
1. Unplug the connector while depress- ing the lock release.
If the connector is tight, wiggle it.
03 07.07