key TOYOTA PRIUS 2003 1.G Navigation Manual

2The navigation system operates by
switches on
the screen and the switches
located on the front face around the
screen. When you touch or push a switch,
a beep sounds. When using the switches
on the touch screen, please use only light
pressure with your finger to protect the
screen from damage. Do not use objects
other than your finger to touch the
screen.
1UE001
To type in an address etc., directly touch al-
phabet keys on the screen. If you touch a
wrong letter, delete it using the
switch.
Touching the
switch erases one letter. Touching
the
“List” switch will change the
screen to a display of the database items that
match the name or address that you have
entered on the screen. The number of
matching items is shown to the right side of
the screen. If the matching item is more than
9,999, the system displays
“” on the
screen.
To input numerals, touch the
“0–9” switch
and the display will change the screen to
number input display.
1UE002
Touching the “A–Z” switch changes the
screen back to the previous name input dis-
play.
1UE003
When a list is displayed, you can scroll or
page through the list by using the appropri-
ate switch.
To shift to the next or previous
page.
To scroll up or down one item at a
time.
This expresses a displayed screen
position.
Inputting letters and number

6You can find your destination using various
methods. See page 7
through 22 for the de-
tailed steps.
1. By Home (
switch on the Destina-
tion screen): You can select your own
home without entering the address each
time. In this case, it is necessary to regis-
ter your home beforehand. See page 7
for the detailed steps.
2. By Preset destination (
— switches on the Destination screen):
You can select one of 5 preset destina-
tions directly. In this case, it is necessary
to register the destinations beforehand.
See page 7 for the detailed steps.
3. By Address: You can input the house
number and the street address by using
the input keys. See page 8 for the de-
tailed steps.
4. By Point of Interest: You can select one of the many points of interest that have
been already stored in the system’s data-
base. There are more than 50 categories
to choose from including restaurants,
banks and automotive places. See page
10 for the detailed steps. 5. By Marked point:
You can register your
own favorite destinations as a “Marked
Point”. The system allows you to store up
100 marked points. See page 17 for the
detailed steps.
6. By Previous destination: You can select a destination from any of the last 20 pre-
viously set destinations. See page 17 for
the detailed steps.
7. By Emergency: You can select one of the three points of emergency service points
that have been already stored in the sys-
tem’s database. See page 18 for the de-
tailed steps.
8. By Intersection: Yo u c a n e n t e r t h e
names of two intersecting streets. This is
helpful if you do not know the specific
street address of your destination but
know the general vicinity. See page 19 for
the detailed steps.
9. By Freeway Entrance/Exit: You can en-
ter the name of the freeway (interstate)
entrance or exit. See page 20 for the de-
tailed steps.
10. By Previous starting point: You can en-
ter a point where the system has started
to guide last time. See page 21 for the de-
tailed steps. 11. By Map selection:
You can select a des-
tination simply by touching the location on
the displayed map. See page 22 for the
detailed steps.
INFORMATION
 When inputting the destination, the
response to the switch may be slow.
 “Points of interest” registration is
made based on the NAVTECH “Stan-
dard POI Inclusion List” and infoU-
SA POI data.
 If there is no point registered,
switches such as “Marked point”,
“Previous destination” or “Previous
starting point” are dimmed and not
available.
 The route for returning may not be
the same as that for going.
 The route guidance to the destina-
tion may not be the shortest route or
a route without traffic congestion.
 Route guidance may not be available
if there is no road data for the speci-
fied location.

8
1UE008
There are 2 ways to input a destination by
address.Touch the
“Address” switch on the
Destination screen. The Address screen
appears, and then you can input a house
number.
Touch letters directly on the screen to in-
put a house number.
1UE009
After inputting a house number, touch the
“Enter” switch to display the screen which
you can input a street name.
It is possible to input a street name first.
Touch the
“Street” switch to display the
screen which you can input a street name.
1UE010
After each letter is input, the system
searches the database for street names that
match. Alphabet keys are dimmed if the da-
tabase does not have a match for the next
letter in the remaining list of matching street
names.
When you input numerals, touch the
“0–9” switch to display the screen for
numeral input.
Based on your input, the number of matching
sites appears at the top right of the screen.
After th e number decreases to some extent,
touch the
“List” switch to display the street
selection list. If the number of matches de-
creases to 4 or less, the screen changes au-
tomatically to the selection list.
Destination input by
A
DDRESS
(a) Inputting a house number
a
nd street name

42
EMV3065U
This picture shows an example of how the
system would route you around a delay
caused by a traffic jam.
1This part indicates the location where
traffic jam is occurring due to road re-
pairs or an accident.
2 Detour route suggested by the system
1UE071
When you touch the “Chg. route” switch,
the screen changes to a change route
screen that allows you to select the distance
you want to detour. Touch one of the numeral
keys to start the detour process. After de-
touring, the system returns to the original
guidance route.
Whole route: If you touch this switch, the
system will calculate an entire new route to
the destination.
INFORMATION
 When your vehicle is on a freeway,
the detour distance selections are 5,
15, and 25 miles.
 The system may not be able to calcu-
late a detour route depending on the
selected distance and surrounding
road conditions.

69

CHANGING THE “NAME”
2UE006
Touch alphabet or numeral keys directly
to input the name.
After you finish your entry, touch the
“OK”
switch.
The previous screen will be displayed. If you
touch the
“Off” switch of show name, the
name of this marked point is not shown on
the map. 
CHANGING THE “PHONE NUMBER”
2UE007
Touch numeral keys directly.
After you finish your entry, touch the
“OK”
switch.
The previous screen will be displayed. 
CHANGING THE “LOCATION”
2UE008
Touch the arrows to scroll to your desired
point on the Map screen.
Touch the
“OK” switch when the cursor
moves to your desired point.
The previous screen will return.
After you finish any editing, touch the
“Back” switch on the first screen of Edit
marked points.

87
3UE014
Date of notice: Input the next maintenance
date.
Distance of notice: Input the driving dis-
tance until the next maintenance check. You
can input a five−digit number for the driving
distance.
When you touch the
! switch on the
screen, the screen changes to display the
change name screen. Touch the keys to in-
put your desired name and then input the
conditions. After you input the information, touch the
“OK” switch. The screen then returns to
the Maintenance screen. The icon’s color will
change to green after the date or driving dis-
tance are input. The icon’s color will change
to orange when your vehicle needs to be ser-
viced. The following switches appear on the
Maintenance screen.
Delete all: Cancel all conditions which have
been input.
Reset all: Reset the item which has satisfied
either condition.
Touch the
“Off” switch of the Maintenance
screen, and the Information screen will no
longer be displayed.
INFORMATION
 For scheduled maintenance infor-
mation, please refer to the “Owner’s
Manual Supplement / Scheduled
Maintenance”.
 Depending on your driving or the
road conditions, the system may
have a timelag between the data
which has been input and the actual
date and driving distance.
Information items
Oil change
Replace oil filter
Rotate tires
Replace tires
Replace battery
Replace brake linings
Replace wiper blades
Replace engine coolant

89
3UE016T
2. After you enter your dealer, the screen
changes and displays the map loca-
tion of the dealer. If it is OK, touch the
“OK” switch.
The current screen changes to the screen
where you can edit the data of your dealer.
(See (b) Editing dealer.)
By touching the
“View map” switch of
Edit dealer screen. Y ou can see the location
of the dealer. (See “Entering Destination” on
page 22.)
3UE017T
1. Touch the “Set dealer” switch and
touch the “Change” switch of the
item to edit. 
Editing the name of the dealer or staff
in charge
3UE018
Touch alphabet or numeral keys directly
to input the name.
After you finish your entry, touch the
“OK”
switch. The previous screen will be dis-
played.
(b) Editing dealer

90
Editing the location
3UE019T
Touch the arrows to scroll to your desired
point on the Map screen.
Touch the
“OK” switch when the cursor
moves to your desired point.
The previous screen will be displayed. 
Editing the phone number
3UE020
Touch numeral keys directly.
After you finish your entry, touch the
“OK”
switch.
The previous screen will be displayed.
After you finish any editing, touch the
“Back” switch.
3UE017T
1. Touch the “Set dealer” switch and
touch the “Delete dealer” switch.
(c) Deleting dealer