display TOYOTA PRIUS 2007 2.G Quick Reference Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2007, Model line: PRIUS, Model: TOYOTA PRIUS 2007 2.GPages: 17, PDF Size: 1.13 MB
Page 4 of 17

3 2
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Master keyIgnition key & wireless remote.
Mechanical keyFits into master key and can be
removed to manually lock/unlock driver door only.
Ignition key slot When inserting, push completely
in. When removing, gently pull; key will be pushed
out by a spring. DO NOT FORCE THE KEY.If it
cannot be removed, push
it all the way in again,
then pull it out.
To remove or replace mechanical key Slide the
lock knob in the direction of the arrow.
Key fob
BASIC HYBRID VEHICLE
OPERATION
Master key
Mechanical key
*
Ignition key
(key fob) slot
*Lock/Unlock the driver’s door only
Slide
Pull out
Hybrid Synergy Drive System
•The vehicle has high voltage DC and AC systems as
well as a 12-volt system. DC and AC high voltage is
very dangerous and can cause severe burns and
electric shock that may result in death or serious
injury.
•Never touch, disassemble, remove or replace high
voltage cables, their connectors and high voltage
parts such as the inverter unit, traction battery,
traction motor, Air Conditioning compressor, AC/DC
converter, etc.
The Hybrid Synergy Drive System utilizes a computer
controlled gasoline engine and electric motor to
provide the most efficient combination of power for
the vehicle. To conserve energy, when the brakes
are applied, braking force generates electricity
which is then sent to the traction battery. In
addition, the engine shuts off when the
vehicle is
stopped. The benefits are better fuel economy,
reduced vehicle emissions and improved
performance.
Note: Fuel consumption and energy information
of the Hybrid System are shown on the
multi-information display. Refer to this
screen for important driving information
and feedb
ack to maximize energy
use/creation and conserve fuel.
Refer to the Owner’s Manualfor more details.
Tips for improved fuel economy
Ensure tire pressures are maintained at levels
specified in the Owner's Manual.
If possible, link trips to reduce engine cold starts.
Av o i d driving at speeds that are higher than
necessary, especially on the highway.
When possible, avoid sudden stops to maximize
regenerative braking energy.
Minimize use of the Air Conditioning.
Page 8 of 17

11
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
10
OVERVIEW
Headlight, turn signal and front fog light1controls
Wiper and washer controls
“POWER”
Clock
“AUDIO” switch (Multi-information display control)
“CLIMATE” switch (Multi-information display control)
Multi-information display
“DISPLAY” switch (Multi-information display control)
“INFO” switch (Multi-information display control)
Mph or km/h button
Tr i p meter reset
Emergency flasher buttonAudio system
12V DC Power outlet
Park button
Electronic shift lever
Ignition key (key fob
) slot
Cruise control
Tire Pressure Wa r n i n g System reset
Smart Key system cancel
1
Steering wheel climate control
Instrument panel light control
Steering wheel audio control
1If equipped2For details, refer to the Navigation System
Owner’s Manual.
Instrument panel
With navigation system1, 2
Without navigation system
Page 9 of 17

BASIC HYBRID VEHICLE OPERATION
13
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
12
OVERVIEW
Headlight indicator
Low engine oil pressure warning
2
Service indicators and reminder
Speedometer
Fuel gauge
Odometer and two trip meters
Instrument cluster
Driver seat belt reminder1
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder1
(alarm will sound if speed is over 12 mph) Brake system warning
1
Charging system warning2
Low fuel level indicator1
Anti-lock Brake System warning1
Malfunction/Check Engine indicator1
When the Anti-lock Brake System (ABS) function is in
action, you may feel the brake pedal pulsating and
hear a noise. In this situation, to let the Anti-lock
Brake System work for you, just hold the brake pedal
down more firmly. Do not pump the brake as this will
result in reduced braking
performance.
Indicator symbols
Master warning1
High coolant temperature warning2
Open door warning1
Airbag SRS warning1
1
For details, refer to “Service reminder indicators and warning buzzers-- --
Instrument cluster” Section 2-5, 2007 Owner’s Manual.
2For details, refer to “Service reminder indicators and warning buzzers-- --
Multi-information display” Section 2-5, 2007 Owner’s Manual.
3If this light flashes, see “Cruise control” Section 2-6, 2007 Owner’s Manual.4For details, refer to “Hybrid transaxle” Section 2-6, 2007 Owner’s Manual.5For details, refer to “Smart Key system” Section 2-1, 2007 Owner’s
Manual.
Driving ready light
Engine oil replacement reminder
1
Tu r n signal indicator
Headlight high beam indicator
Cruise control indicator
3
Slip indicator
Hybrid System warning2
Vehicle Stability Control warning1
Tr a c t i o n battery warning2
Electric power steering system
warning2
Smart Key system warning5
Ta i l light indicator
Automatic headlight leveling system warning
2
Running mode position indicator4
Automatic Air Conditioner indicator
Recirculate mode indicator
Windshield air flow indicator
Rear window and outside rear view mirror
defoggers indicator
Hybrid vehicle immobilizer/Theft deterrent
system indicator
Low Tire Pressure Wa r n i n g1
Front passenger occupant classification
indicator
Page 13 of 17

BASIC HYBRID VEHICLE OPERATION
21
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
20
FEATURES/OPERATIONS
Setting a speed
System
ON/OFF
Resume
2/Increase speed
Cancel1
Set/Decrease speed
Cruise control
Passenger compartment temperature
Outside temperature
Temperature
Air flow vent
Fan speed
Automatic climate control ON
Fresh or recirculated cabin air
Rear window and outside rear view mirror
defogger
Windshield air flow
Air Conditioning ON/OFF
Climate control OFF
Display the operation screen
1
Air Conditioning/Heating
1For details, refer to the “Navigation System
Owner’s Manual.”Auto A/C ON/OFF
Temperature selector
Air intake selector
Windshield vent
Rear window and outside rear view mirror
defogger
Steering wheel switches
1The set speed may also be cancelled by depressing
the brake pedal.
2If vehicle speed falls below 25 mph, the set speed
will not be resumed.
Turning system ON/OFF
With navigation system1
Ty p e 2 functions
Ty p e 1 functions
Page 14 of 17

23
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
22
FEATURES/OPERATIONS
RADIO
To preset a station Tune in the desired station and
touch a station selector icon (1-6) until you hear a
beep.
To scan for stationsPush “SCAN.” Push again to hold
selection.
CD PLAY E R
To scan tracks on a disc To u c h “SCAN” icon on the
display. Push again to hold selection.
CD changer (Ty p e 3 only)
-To load one disc Push “LOAD” and insert one disc.
-To load multiple discs Push and hold “LOAD” until
you hear a beep. Insert one disc. Shutter will close
and then re-open for
next disc.
To select a file (MP3/WMA only) Tu r n “TUNE•FILE.”
1For details, refer to theNavigation System Owner’s
Manual.
AudioAudio operation screen
Ty p e 2 additional functions
Ty p e 3 additional functions
Push
Audio
operation
screen
“-+”
Vo l u m e control
“MODE”
Push to turn audio ON and select an audio mode.
Push and hold to turn the audio system OFF.
“”switch
In radio modePush to select a preset station;
push and hold to seek the next strong station.
In CD modePush to skip up or down to
next/previous
track.
>>
Steering wheel switches
Ty p e 1 functions
Audio file search
With
navigation
system
1
Eject CDPush to turn
ON/OFF
Load CD(s)Station/CD track scan Mode
Seek station/CD track select
Audio
Seek station/CD track or
audio file selectCD/AUX mode select
Push to turn
ON/OFF