radio TOYOTA PRIUS 2007 2.G Quick Reference Guide

BASIC HYBRID VEHICLE OPERATION
7
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
6
BASIC HYBRID VEHICLE OPERATION
Insert key*.
Depress the brake pedal and push the “POWER”
button briefly and firmly.
The “READY” light will blink. After a few
seconds, when the light remains ON and a beep
sounds, you may begin driving.
Note:The brake pedal must be depressed to turn
the Hybrid System on.
*It is not
necessary to insert the ignition key (key
fob) if Smart Key system is installed and activated.
Turning the Hybrid System ON
Changing operation modes
Pressing “POWER” without depressing the brake
pedal while the Hybrid System is OFF will change
the operation mode in succession from:
Start function
ACC
IG-ON
OFF
Accessories such as the radio will operate.
Ignition is on; Hybrid System is not
engaged.
All systems OFF.
Smart Key unlock functions(if equipped)
The Smart Key unlocking function can be
programmed to operate in 3 different modes when
Smart Key is activated. In all modes, grasping the
front passenger door handle will unlock all doors.
-To unlock driver side door only, grasp driver side
handle.
-To unlock all doors, grasp any door handle except
rear doors.
-To unlock driver side door
or hatch independently,
grasp the handle.
Refer to the Owner’s Manualfor more information
on this feature, and how to change modes.
Smart Key system cancel switch
NOTE:To conserve battery power, turn the Smart Key
system “OFF” when not using the vehicle for prolonged
periods of time. For more battery saving information,
refer to the
Owner’s Manual for more details. ON
OFF
Push
Unlocking operation
Front door
NOTE:After unlocking, if a door is not opened
within 30 seconds, all doors will relock for safety.
Refer to your Owner’s Manualand the following
section of this guide for Smart Key unlocking
programmable options.
Rear hatch

23
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
22
FEATURES/OPERATIONS
RADIO
To preset a station Tune in the desired station and
touch a station selector icon (1-6) until you hear a
beep.
To scan for stationsPush “SCAN.” Push again to hold
selection.
CD PLAY E R
To scan tracks on a disc To u c h “SCAN” icon on the
display. Push again to hold selection.
CD changer (Ty p e 3 only)
-To load one disc Push “LOAD” and insert one disc.
-To load multiple discs Push and hold “LOAD” until
you hear a beep. Insert one disc. Shutter will close
and then re-open for
next disc.
To select a file (MP3/WMA only) Tu r n “TUNE•FILE.”
1For details, refer to theNavigation System Owner’s
Manual.
AudioAudio operation screen
Ty p e 2 additional functions
Ty p e 3 additional functions
Push
Audio
operation
screen
“-+”
Vo l u m e control
“MODE”
Push to turn audio ON and select an audio mode.
Push and hold to turn the audio system OFF.
“”switch
In radio modePush to select a preset station;
push and hold to seek the next strong station.
In CD modePush to skip up or down to
next/previous
track.
>>
Steering wheel switches
Ty p e 1 functions
Audio file search
With
navigation
system
1
Eject CDPush to turn
ON/OFF
Load CD(s)Station/CD track scan Mode
Seek station/CD track select
Audio
Seek station/CD track or
audio file selectCD/AUX mode select
Push to turn
ON/OFF