lock TOYOTA PRIUS 2008 2.G Manual Online

432 5-2. Steps to take in an emergency
PRIUS_U_(L/O_0802)
Exterior alarm:
One beep
(sounds for 2
seconds)The lock button has
been pressed while
the hybrid system is
not OFF and the shift
position is in “P”.
Turn the hybrid sys-
tem OFF.
Interior alarm:
One beep (for 5
seconds) The vehicle’s ID code
detection system has
judged that the smart
key is not present
when the “POWER”
switch is pressed.
Check that the
smart key is in the
vehicle and within
the detection area.
AlarmWarning
lightDetailsCorrection procedure

440 5-2. Steps to take in an emergency
PRIUS_U_(L/O_0802)
Taking out the jack.Open the auxiliary box.
( P. 336)
Unlock the tightening strap.
After storing the jack, make
sure it is securely held by the
tightening strap.
ITY52P002
STEP1
ITY52P003
STEP2

450
5-2. Steps to take in an emergency
PRIUS_U_(L/O_0802)
If the electronic key does not operate properly
Locking and unlocking the doorsUsing the mechanical key in
order to perform the following
operations:Locks all doors
Unlocks the door
Turning the key rearward unlocks
the driver’s door. Turning the key
once again unlocks the other
doors.
Starting the hybrid system
To start the hybrid system, insert
the key into the key slot.
( P. 132)
If the electronic key 12 volt batter y is discharged, the doors can be
opened by the mechanical key. The engine system can be still
started by following the procedure.
21
ITY52P014
ITY52P015
■ Replacing the key battery
As this procedure is the temporary measure, it is recommended that the
electronic key battery be replaced immediately. ( P. 396)

5
When trouble arises
451
5-2. Steps to take in an emergency
PRIUS_U_(L/O_0802)
If the vehicle 12 volt batter y is discharged
The following procedures may be used to start the engine if the vehi-
cle’s 12 volt battery is discharged.
You can call your Toyota dealer, or qualified repair shop.
If you have a set of jumper (or booster) cables and a second vehi-
cle with a 12 volt battery, you can jump start your Toyota following
the steps below.
Open the hood and fuse block cover.
Open the exclusive jump start-
ing terminal cover.
STEP1
ITY52P016
STEP2

463
6-1. Specifications
6
Vehicle specifications
PRIUS_U_(L/O_0802)
Vehicle identification
The vehicle identificati on number (VIN) is the legal identifier for your
vehicle. This is the primary identification number for your Toyota. It is
used in registering the ownership of your vehicle.
This number is stamped on the
top left of the instrument panel.
This number is also on the Certi-
fication Label.
The engine number and traction
motor number are stamped on
the engine block as shown.Gasoline engine number
Electric motor (traction motor)
number
ITY61P001
ITY61P002
ITY61P003

468 6-1. Specifications
PRIUS_U_(L/O_0802)
Electrical system
Transmission
12 volt battery
Open voltage at
68F (20 C): 12.6 
12.8V Fully charged
12.2  12.4V Half charged
11 . 5  11.9V Discharged
(Voltage is checked 20 minutes after
the engine and all lights are turned
off.)
Charging rates 3.5A max.
Fluid capacity
Drain and refill3.8 qt. (3.6 L, 3.2 lmp.qt.)
Fluid type Toyota Genuine ATF WS
NOTICE
■Transmission fluid type
Using transmission fluid other than “Toyota Genuine ATF WS” may cause
deterioration in shift quality, locking up of your transmission accompanied by
vibration, and ultimately damage the transmission of your vehicle.

488
PRIUS_U_(L/O_0802)
6-2. Customization
Customizable features
ItemFunctionDefault settingCustomizedsetting
Smart key
system
(
P. 36) Smart key system ON OFF
Operation signal
(Emergency flashers)
ON OFF
Operation signal
(Buzzer) ON OFF
Wireless
remote
control
(
P. 49) Unlocking operation
Driver’s door
unlocked in 1-
step, all doors
unlocked
in 2-stepAll doors
unlocked in 1-step
Time elapsed before
automatic door lock
function is activated if
door is not opened after
being unlocked 60 seconds
OFF
30 seconds
Your vehicle includes a variety of electronic features that can be per-
sonalized to your preferences. Programming these preferences
requires specialized equipment and may be performed by an autho-
rized Toyota dealership.
Some function settings are changed simultaneously with other functions
being customized. Contact your Toyota dealer for further details.

489
6-2. Customization
6
Vehicle specifications
PRIUS_U_(L/O_0802)
ItemFunctionDefault settingCustomized
setting
Wireless
remote
control
(
P. 4 9 ) Operation indicator
(Emergency flashers)
ON OFF
Operation indicator
(Buzzer) ON OFF
Panic function ON OFF
Buzzer sounds when
pushing with any
door not closed ON OFF
Door lock
(
P. 5 1 ) Unlocking using a key Driver’s door
unlocked in 1-
step, all doors
unlocked
in 2-stepAll doors
unlocked in 1-step
Automatic
light control
system
(
P. 150) Light sensor sensitivity Level 3 Levels 1 to 5
Time elapsed before
headlights automati-
cally turn off after doors
are closed
60 seconds0 seconds
30 seconds
90 seconds
Daytime running light ONOFF
*

490 6-2. Customization
PRIUS_U_(L/O_0802)
*:Vehicles sold outside Canada
ItemFunctionDefault settingCustomizedsetting
Illumination
(
P. 318) Time elapsed before
lights turn off
15 seconds7.5 seconds
30 seconds
Operation when the
doors are unlocked ON OFF
Operation after the
“POWER” switch
turned OFF ON OFF
Front/rear personal
lights turned on when a
door is opened Corresponding
light only All lights
OFF

498
PRIUS_U_(L/O_0802)
Abbreviation list
Abbreviation/Acronym list
ABBREVIATIONSMEANING
A/C Air Conditioning
ABS Anti-lock Brake System
ACC Accessory
ALR Automatic Locking Retractor
CRS Child Restraint System
ECU Electronic Control Unit
EDR Event Data Recorder
ELR Emergency Locking Retractor
EPS Electronic Power Steering
GAWR Gross Axle Weight Ratings
I/M Emission inspection and maintenance
LED Light Emitting Diode
MMT Methylcy clopentadienyl Manganese Tricarbonyl
M + S Mud and Snow
MTBE Methyl Tertiary Butyl Ether
OBD On Board Diagnostics
SRS Supplemental Restraint System
TIN Tire Identification Number
TPMS Tire Pressure Monitoring (Warning) System
VIN Vehicle Identification Number
VSC Vehicle Stability Control