lock TOYOTA PRIUS 2008 2.G Quick Reference Guide

OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Clock
25
H-Hour set
M-Minute set
Cup and bottle holders
Cup holder-Front Cup holder-Rear
Bottle holder
Front door
Power outlets
Instrument panel (12V)Center console box (12V)
The Hybrid System must be in “ACC” or “IG-ON.”
Parking brake
Set: Depress
Release: Depress again

26
SAFETY AND
EMERGENCY FEATURES
If belt is fully extended, then retracted even
slightly, it cannot be re-extended beyond that point,
unless fully retracted again. This feature is used to
help hold child restraint systems securely.
To find more information about seat belts, and how
to install a child restraint system, refer to the
Owner’s Manual.
Keep as low on
hips as possible
Take up
slack
Too high
Seat belts
Moving the lever to “LOCK” will allow the door to
be opened only from the outside.
Doors-Child safety locks
Door locks
Seat belts-Shoulder belt anchor
Unlock
Rear door
Push up, or
squeeze lock
release to lower Lock

27
OVERVIEW BASIC HYBRID VEHICLE OPERATIONFEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
27
Emergency flashers
Note: The air vent on the right side of the rear
seatback is designed to assist in cooling the
Hybrid vehicle battery. DO NOT BLOCK OR
COVER THIS VENT, as it may cause
overheating, resulting in reduced vehicle
performance.
Rear air vent
Push
Tire Pressure Warning System
If tire pressure becomes critically low on any of the
tires (excluding spare), indicator illuminates. Pushing
“ SET” button should not turn off the light.
Correctly adjusting tire inflation will turn off the
light after a few minutes. After replacing/rotating
tire or wheels, the system must be initialized.
Refer to the Owner’s Manualfor details on system
reset initialization.

28
SAFETY AND EMERGENCY FEATURES
Jump starting
Jump start terminal
Connecting jumper cables
The jump start terminal is in the fuse box. To access
the terminal, open the fuse block cover and the
jump start terminal cover.
Recommended
connecting point
Exclusive jump
start terminal
cover
(1) Connect positive (red) jumper cable to the jump
start terminal.
(2) Connect positive (red) jumper cable to the
positive (+) terminal on the booster battery.
(3) Connect negative (black) jumper cable to the
negative (-) terminal on the booster battery.
(4) Connect negative (black) jumper cable to the
recommended connecting point of the vehicle
with the discharged battery.
(5) Depress brake pedal, and press “POWER” button
to start the vehicle.
Refer to the “Owner’s Manual” for more details.
(1)
(3)
(2)
(4)
(4)