ADVANCED PARKING GUIDANCE SYSTEM
211
Do not allow organic solvent, car
wax, window cleaner or paint coat-
ing to adhere to the camera. If this
happens, wipe it off as soon as
possible.
If the camera is subjected to a colli-
sion, or the camera orientation
confirmation lines are not in line
with the bumper, it is likely that the
camera position or angle of instal-
lation has become crooked. See
your T oyota dealer as soon as pos-
sible.
Use your own eyes to confirm the
vehicle’s surroundings, as the dis-
played image may become faint or
dark, and moving images will be
distorted, or not entirely visible
when the outside temperature is
low. When backing up, be sure to
check behind and all around the ve-
hicle visually and with mirror be-
fore proceeding.
Do not attach any accessories
within the detection range of the
sensors.
A sensor may not operate properly
in the following situations.
There is ice, snow or mud on the
sensor. (When it is removed, the
normal operation will return.)
The sensor is frozen. (When the
sensor warms up, it will return to
normal.) At low temperatures in
particular, sensors that are fro-
zen may not detect a parked ve-
hicle.
When the vehicle is tilted.
In extreme hot or cold weather.
When driving on bumpy roads,
slopes, gravelled roads or grass.
Devices issuing ultrasonic
waves are operated around your
vehicle, such as a horn from
another vehicle, motorcycle en-
gine, air braking sound from
heavy duty vehicles.
When rain or water is splashed
over the vehicle.
When a radio antenna or fender
pole is mounted on your vehicle.
The sensor approaches too
close to a parked vehicle.
The sensor is covered in any
way.
The bumper or sensor receives a
strong impact.
NOTICE
When washing the vehicle, do not ap-
ply intensive burst of water to the
camera or camera area. Doing so may
result in the camera malfunction.
