brake TOYOTA PRIUS 2018 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2018, Model line: PRIUS, Model: TOYOTA PRIUS 2018Pages: 56, PDF Size: 3.82 MB
Page 3 of 56
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
1
INDEX
Engine maintenance 9
Fuel tank door release & cap 7
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 8
Keyless entry
1,2 6
Smart Key system (and remote)1,2 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW FEATURES & OPERATIONS (continued)
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ P (TSS-P)
Air conditioning/heating 18-19
Audio 22-23
Auto lock/unlock
1,2 10
Blind Spot Monitor with Rear
$ S P T T 5 S B G m D " M F S U BSM w/RCTA) 27
Clock 21
Color Dual Multi-Information
Display (MID)
2 20
Door locks 14
$ P M P S ) F B E V Q % J T Q M B Z ) 6 %
Driving mode select switch 11
EV drive mode switch 11
Garage door opener (HomeLink
®)3 27
Hybrid Synergy Drive System 10
Hybrid transmission 11
* O U F M M J H F O U $ M F B S B O D F 4 P O B S * $ 4
* O U F M M J H F O U 1 B S L J O H " T T J T U * 1 "
Lights
1 & turn signals 16
Moonroof 14
Parking brake 12
Power outlets 24
Qi-compatible wireless charging 24
3 F B S W J F X N P O J U P S T Z T U F N
Seat adjustments-Front 13
Seat heaters 17
Seats-Folding down rear seat 13
Seats-Head restraints 13 Floor mat installation 43
Rear door child safety locks 40
Seat belts 39
Seat belts-Shoulder belt anchor 39
Spare tire /Tire repair kit & tools 40-41
Star Safety System
™ 42-43
Tire Pressure Monitoring
X B S O J O H
4 Z T U F N 5 1 . 4
Automatic ) J H I # F B N T " ) #
8
Full-Speed Range Dynamic Radar
$ S V J T F $ P O U S P M % 3 $ $
35-37
Lane Departure Alert with Steering
" T T J T U G V O D U J P O - % " X 4 "
31-34
Pre-Collision System with Pedestrian
% F U F D U J P O G V O D U J P O 1 $ 4 X 1 %
29-31
Quick overview-
Toyota Safety Sense
™ 1 5 4 4 1
28
Sensors 28 Steering lock release 18
Steering wheel switches &
5 F M F Q I P O F D P O U S P M T # M V F U P P U I
®) 17
Tilt & telescopic steering wheel 12
6 4 # " 6 9 1 P S U
Vehicle Stability Control
7 4 $
5 3 " $ 0 ' ' T X J U D I 12
Windows-Power 14
Windshield wipers & washers 15
BLUETOOTH® DEVICE
PAIRING SECTION 44-53
Page 6 of 56
4
ECO MODE indicator
Automatic High Beams
(AHB) indicator1
For details, refer to “Indicators and warning lights,” Section 2, 2018 Owner’s
Manual.
Anti-lock Brake System (ABS) warning1
Charging system warning1
Brake system warning1
EV drive mode indicator
EV indicator
Airbag SRS warning1
Electric power steering system warning1
OVERVIEW
Instrument cluster
Air bag ON/OFF indicator
Blind Spot Monitor (BSM) indicator3
Constant speed cruise control
indicator2/Constant speed
cruise control SET indicator2
Full-Speed Dynamic Radar Cruise
Control (DRCC) indicator2/
DRCC SET indicator2
Arrow direction indicates fuel tank door
position
Brake Overrride System/Drive-Start
control/Intelligent Clearance Sonar3
Brake system warning (yellow indicator)1
Driver seat belt reminder and/
or front passenger seat belt reminder (alarm
will sound if speed is over 12 mph)
Indicator symbols
Clock
Main Display
Multi-Information Display (MID) Transmission shift position indicator
Service indicators and reminders
Page 7 of 56
5
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
High coolant temperature warning1
Low engine oil pressure warning1
Power Mode indicator
READY indicator
Low Tire Pressure Warning1
Open door warning
Immobilizer system indicator
Low fuel level warning
Master warning
1VSC OFF indicator1
Fog light indicator3
Turn signal indicator
Intelligent Parking Assist indicator3
S-APGS indicator3
Intelligent Clearance Sonar (ICS) OFF
indicator3
Parking brake indicator
Shift position indicators
Steering Assist indicator3
Smart Key system warning
Lane Departure Alert (LDA) with Steering
Assist
Lane Departure Alert (LDA) Sway Control
Headlight low/high beam
indicators
Lane Departure Alert (LDA) indicator
Malfunction/
Check Engine indicator1
Pre-Collision System (PCS)
warning light1
Slip indicator/Hill-start Assist
Control indicator1
Rear passengers’ seat belt
reminder indicator
1 If indicator does not come on or turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” or “Dynamic Radar Cruise Control,” Section 4-5, 2018
Owner’s Manual.
3 If equipped.
Page 9 of 56
7
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
START FUNCTION
Fuel tank door release & cap
NOTE: Tighten until one click is heard. If the cap is not locked or tightened,
Check Engine “
” indicator may illuminate.
Smart Key system (and remote entry)
Turn to open
Store
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
0 G G " M M T Z T U F N T 0 ' ' & N F S H F O D Z n B T I F S T D B O C F V T F E
Accessory – Some electrical components can be used.
On - All electrical components can be used.
When starting the hybrid system, make sure you are carrying the Smart key, the
parking brake is set and shift position is in P.
POWER (WITHOUT STARTING HYBRID SYSTEM)
Page 12 of 56
10
TIPS FOR IMPROVED FUEL ECONOMY
STARTING YOUR VEHICLE
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Entune™ Audio system screen or the navigation system.
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the vehicle.
To conserve energy, when the brakes are applied the braking force generates
electricity which is then sent to the traction battery. In addition, the engine shuts off
when the vehicle is stopped. The benefits are better fuel economy, reduced vehicle
emissions and improved performance.
1. Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
2. When possible, link trips to reduce engine cold starts.
3. Avoid driving at speeds that are higher than necessary, especially on the highway.
4. When possible, avoid sudden stops to maximize regenerative braking energy.
5. Minimize use of the air conditioning.
Hybrid Synergy Drive System
Auto lock/unlock
FEATURES & OPERATIONS
(1) Depress the brake pedal and
press the “POWER” switch briefly
and firmly.
(2) The “READY” light will blink.
After a few seconds, when the
light remains steady and a beep
sounds, you may begin driving.
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed goes above approximately 12 mph.
' U L Y H U
Page 13 of 56
11
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
* The engine brake is the equivalent of downshifting. Shift to “B” when engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.). While vehicle is
stopped, push “P” button to park.
Reverse
Park button
Neutral
Drive
Engine brake*
Hybrid transmission
Driving mode select switch
EV Drive Mode ON/OFF switch EV-Drive Mode allows the electric motor (traction
motor), powered by the hybrid battery (traction battery), to be used to drive the
vehicle under certain driving conditions.
Refer to the Owner’s Manual for more details.
Normal - Suitable for
normal driving.
Power mode - Use when
a higher level of response
is desired, such as when
driving in mountainous
regions.
ECO drive mode -
Helps achieve lower fuel
consumption during trips
that involve frequent
accelerating and braking.Refer to the Owner’s Manual for more details.
EV drive mode switch
Page 14 of 56
12
Vehicle Stability Control (VSC)/TRAC OFF Switch
Parking brake
Set: Depress
Release: Depress again
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt & telescopic steering wheel
FEATURES & OPERATIONS
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While car is stopped, press switch to disable the TRAC system.
To disable both VSC and TRAC systems, press the switch for at least 3 seconds.
Refer to the Owner’s Manual for more details.
Push
Lock release lever
Angle
Length
Page 28 of 56
26
Intelligent Clearance Sonar (ICS) (if equipped)
When parking, this available system scans for stationary objects, like walls or
lampposts. Should the system anticipate a collision, it will emit an audible and
visible alert, reduce engine or motor output, and automatically apply the brakes if
needed. And with advanced side-colllision detection, Prius can help you get in and
out of parking spots more easily.
Refer to the Owner‘s Manual for more details on this system.
System ON/OFF on the
Multi-Information Display.
CHANGE SETTINGS
FEATURES & OPERATIONS
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the screen
contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
Page 31 of 56
29
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt
to test the operation of the pre-collision system yourself, as the system may not
operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle
may not be detected by the radar and camera sensors, preventing the system from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/PD operation,
settings adjustments, limitations, and precautions before attempting to use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
Page 32 of 56
30
CHANGING THE PCS ALERT TIMING
TOYOTA SAFETY SENSE™
Far
Middle
(default)
Near
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select from the MID and then press “”. The
setting screen is displayed.
(3) Press “
” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “
” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
" T Q B S U P G U I F 1 S F $ P M M J T J P O 4 Z T U F N
U I J T G V O D U J P O J T B M T P E F T J H O F E U P m S T U Q S P W J E F B O
alert and then automatic braking if needed.In certain conditions, the PCS system included with the TSS-P package may also
help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to
help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle
D B N F S B P G 1 $ 4 E F U F D U T B Q P U F O U J B M Q F E F T U S J B O C B T F E P O T J [ F
Q S P m M F
B O E N P U J P O P G
the detected pedestrian. However, a pedestrian may not be detected depending
on the conditions, including the surrounding brightness and the motion, posture,
size, and angle of the potential detected pedestrian, preventing the system from
operating or engaging. Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION