rear view mirror TOYOTA PRIUS 2021 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2021, Model line: PRIUS, Model: TOYOTA PRIUS 2021Pages: 64, PDF Size: 6.06 MB
Page 24 of 64

22
FEATURES & OPERATIONS
AUTOMATIC AIR CONDITIONING - VEHICLES EQUIPPED WITH 7-in DISPLAY
Air conditioning/heating
Air conditioningON/OFF
Recirculate cabin air (outside air when OFF)
Airflow vent
Windshield defogger
Outside rearview mirror/Rear window defogger
Automatic climate control ONAdjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically to set temperature.
Smart-flow (S-Flow) mode gives airflow priority to the front seats, reducing the airflow and air conditioning effect onrear seats when there are no passengers.
Climate control OFF
Temperature settingFan speed
ECO mode: Climate control that minimizes fuel consumption. This option may reduce fan speed.
Adjusters Up/Down: Change temperature,change fan speed, change vent mode.
Seat heaters (if equipped)
Driver seatFrontpassenger seat
The “POWER” switch must be in the “IGNITION ON” mode for use.
NOTE: Turn system off when not in use.
126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 22126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 226/17/20 10:09 AM6/17/20 10:09 AM
Page 25 of 64

23
AUTOMATIC AIR CONDITIONING - VEHICLES EQUIPPED WITH 11.6-in DISPLAY
Air conditioning temperature control
Windshield defogger
Rear window and outside rear view mirrors defogger
Temperature setting
Fan speed settingAutomatic mode setting
Air conditioning control screen
Airflow mode setting
S-FLOW mode settingAir conditioningECO mode settingA/C settingOutside/recirculated air mode setting
OVERVIEW
FEATURES
& OPERATIONS
TOYOTA
SAFETY
SENSE
SAFETY
& EMERGENCY
FEATURES
Touch area to display air conditioning control screen (See below)
126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 23126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 236/17/20 10:09 AM6/17/20 10:09 AM
Page 31 of 64

29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While the vehicle is stopped, press switch to disable the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at least 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Push
Vehicle Stability Control (VSC)/
TRAC OFF switch
Assist mode will be canceled or stopped in the following cases.
Assist control is canceled when
• The system temperature preservation function operates
• There is a system malfunction
• System determined that the parking environment is not suitable for assist to
continue
When assist control is canceled, firmly grasp the steering wheel, depress the brake
pedal and stop the vehicle.
Start again from the beginning, as the system will already be canceled. When
continuing to park manually, operate the steering wheel as you normally would.
Assist control is stopped when
• The steering wheel is operated
• The vehicle speed exceeds 4 mph (7 km/h) during assist control
• The Front and Rear Parking Assist with Automated Braking** operates
When assist control is stopped, it can be resumed by following the guidance shown
on the screen.
The Intelligent Parking Assist (IPA) system requires driver brake control. Always
look around outside the vehicle and use mirrors to confirm clearance.
* Refer to section S-APGS (Simple Advanced Parking Guidance System) in the
Owner’s Manual for limitations and more details.
** Refer to section PKSB (Parking Support Brake function) in the Owner’s Manual
for limitations and more details.
CANCELING OF STOPPING ASSIST MODE
126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 29126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 296/17/20 10:09 AM6/17/20 10:09 AM
Page 32 of 64

30
FEATURES & OPERATIONS
Blind Spot Monitor with Rear Cross Traffic
Alert (BSM w/RCTA) (if equipped)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the decision when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
Prius’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the
Prius is detected, the outside rear view mirror indicators will flash. Also, the RCTA
detection screen will be shown on the display and the RCTA buzzer will sound.
IndicatorIndicatorBSM on/off screen and indicator
Buzzer (RCTA only)
RCTA detection screen (RCTA only)
(1) Press “ ” switches and select “” from the Multi-Information Display (MID).
(2) Press “ ” switches and select “” and then press “.” The setting
screen is displayed.
(3) Press “ ” switches and select the “On/Off” setting function and then press
“.”
(4) Press “” to go back to the menu.
Note: Once the systems are disabled, the systems will not be enabled until
they are enabled by the screen of multi-information display again. (The
systems are not automatically enabled even when the hybrid system is
restarted.)
Refer to the Owner’s Manual for limitations and more details on this system before
attempting to use it.
SYSTEM ON/OFF
126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 30126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 306/17/20 10:09 AM6/17/20 10:09 AM
Page 35 of 64

33
Sensors
TSS 2.0 combines a forward-facing camera mounted in front of the inside rear view
mirror and a grille-mounted radar mounted in the front grille. These sensors support the
driver assist systems.
The Pre-Collision System uses a grille-mounted radar and forward-facing camera to
help detect a vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not use PCS instead of normal braking operations under any circumstances. Do not attempt to test the operation of the Pre-Collision System yourself, as the system may not operate or engage, possibly leading to an accident. In some situations, such as when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a curve and for a few seconds after driving on a curve, a vehicle or pedestrian or bicyclist may not be detected by the grille-mounted radar and forward-facing camera, preventing the system from operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the system may not operate properly.
Pre-Collision WarningWhen the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the Multi-Information Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake AssistIf the driver notices the hazard and brakes, the system may provide additional braking force using Brake Assist. This system may prime the brakes and may apply greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Forward-facing camera
Grille-mounted radar
126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 33126899_MY21_Prius_QRG_V2_ML_0614_R1.indd 336/17/20 10:09 AM6/17/20 10:09 AM