cruise control TOYOTA PRIUS PLUG-IN 2014 Owners Manual

32
3. Basic operation
PRIUS PHV_QG_OM47866U_(U)
Cruise control operation
■Set the vehicle speed
Press the “ON-OFF” button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to set
the speed.
■Adjusting the set speed
Increases the speed
Decreases the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the lever
in the desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By approximately 1 mph (1.6 km/h) each time the
lever is operated.
Large adjustment: The set speed can be increased or decreased
continually until the lever is released.
ITO24P105

33
3. Basic operation
PRIUS PHV_QG_OM47866U_(U)
■Canceling and resuming the constant speed control
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied.
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than
approximately 25 mph (40 km/h).
ITO24P106
■Cruise control can be set when
●The shift position is in D.
●Ve h i c l e s p e e d i s a b o v e a p p r o x i m a t e l y 2 5 m p h ( 4 0 k m / h ) .

17
PRIUS PHV_OM_OM47856U_(U)
B
Telephone switches*1, 2
“DISP” button P. 269Audio remote
control switches*1, 2
Cruise control switch∗
Dynamic radar cruise control
switch∗
P. 310
P. 314
Vehicle-to-vehicle distance button∗ P. 314
Talk switch*1, 2
“TRIP” button P. 269, 275
Climate remote control switches P. 371
∗:If equipped
*1:Refer to “NAVIGATION SYSTEM OWNER’S MANUAL”.
*2:Refer to “DISPLAY AUDIO SYSTEM OWNER’S MANUAL”.

23
PRIUS PHV_OM_OM47856U_(U)
Installation of a mobile two-way radio system
The installation of a mobile two-way radio system in your vehicle could affect
electronic systems such as:
●Multiport fuel injection system/sequential multiport fuel injection system
●Cruise control system
●Anti-lock brake system
●SRS airbag system
●Seat belt pretensioner system
Be sure to check with your Toyota dealer for precautionary measures or spe-
cial instructions regarding installation.
High voltage parts and cables on the hybrid vehicles emit approximately the
same amount of electromagnetic waves as the conventional gasoline pow-
ered vehicles or home electronic appliances despite of their electromagnetic
shielding.
Unwanted noise may occur in the reception of the mobile two-way radio.

253
2-1. Driving procedures
PRIUS PHV_OM_OM47856U_(U)
2
When driving
■About engine braking
When shift position B is selected, releasing the accelerator pedal will apply
engine braking.
●When the vehicle is driven at high speeds, compared to ordinary gaso-
line-fueled vehicles, the engine braking deceleration is felt less than that
of other vehicles.
●The vehicle can be accelerated even when shift position B is selected.
If the vehicle is driven continuously in the B position, fuel efficiency will
become low. Usually, shift the shift position to D.
■When driving with cruise control or radar cruise control activated
Even if switching the driving mode to power mode with the intent of enabling
engine braking, engine braking will not activate because cruise control or
radar cruise control will not be canceled.
■When canceling Eco drive mode/power mode
●Press the switch again. Also, power mode will be canceled automatically
when the “POWER” switch is turned off. However, Eco drive mode will
not be canceled automatically until the switch is pressed, even if the
“POWER” switch is turned off.
●When in Eco drive mode, if the power mode switch is pressed or the
operation is reversed, the mode will switch to that of the last switch to be
pressed.
■After charging/reconnecting the 12-volt battery
→P. 4 7 6
■Customization
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features →P. 6 4 3 )

265
2-2. Instrument cluster
PRIUS PHV_OM_OM47856U_(U)
2
When driving
■Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(→P. 2 5 6 )
Eco Driving Indicator
Light (→P. 2 7 0 )
(U.S.A.)
Headlight indicator
(→P. 2 9 4 )
“ECO MODE”
indicator (→P. 2 4 9 )
(Canada)
Ta i l l i g h t i n d i c a t o r
(→P. 2 9 4 )
Power mode indicator
(→P. 2 4 9 )
Headlight high beam
indicator (→P. 2 9 7 )(if equipped)
Cruise control indicator
(→P. 3 1 0 , 3 2 2 )
Front fog light indicator
(→P. 3 0 0 )(if equipped)
Radar cruise control
indicator (→P. 3 1 4 )
Security indicator
(→P. 1 8 3 )(if equipped)
“SET” indicator
(→P. 3 1 0 , 3 2 2 )
“READY” indicator
(→P. 2 4 0 )
Slip indicator
(→P. 3 3 1 , 3 3 5 )
EV indicator (→P. 2 7 0 )
(if equipped)
“PCS” warning
(→P. 3 3 8 )
EV drive mode indica-
tor (→P. 3 5 )
Charging timer indicator
(→P. 9 0 )
*1, 2
*1, 3

268
2-2. Instrument cluster
PRIUS PHV_OM_OM47856U_(U)
Multi-information display
The multi-information display presents the driver with a variety of
driving-related data, including the clock.
●Energy monitor (→P. 5 2 )
●Hybrid System Indicator (→P. 2 7 0 )
●EV driving ratio indicator (→P. 2 7 3 )
●5-minute/1-minute fuel consumption (→P. 6 1 )
●Monthly fuel consumption record (→P. 6 4 )
●Odometer/trip meter/distance to empty (→P. 2 7 5 )
●Clock (→P. 2 7 7 )
●Calendar (→P. 2 7 7 )
●Dynamic radar cruise control display (if equipped) (→P. 3 1 4 )
●Warning messages (→P. 5 4 8 )

288
2-2. Instrument cluster
PRIUS PHV_OM_OM47856U_(U)
■Head-up display contents
●Spe edometer
Displays the vehicle speed.
●Hybrid System Indicator
Provides assistance for Eco-friendly driving.
●Turn-by-turn navigation*
Displays a notification of upcoming intersections during navigation
system route guidance. (→P. 2 9 1 )
●Dynamic radar cruise control*
Displays the approach warning. (→P. 3 1 4 )
●PCS (Pre-Collision System)*
Indicates that there is a possibility of collision. (→P. 3 3 7 )
*: If equipped

310
PRIUS PHV_OM_OM47856U_(U)
2-4. Using other driving systems
Cruise control∗
∗: If equipped
Use the cruise control to maintain a set speed without depressing
the accelerator pedal.
Cruise control switch
Indicators
■Setting the vehicle speed
Press the “ON-OFF” button to
activate the cruise control.
Cruise control indicator will
come on.
Press the button again to
deactivate the cruise control.
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to set
the speed.
“SET” indicator will come on.
The vehicle speed at the
moment the lever is released
becomes the set speed.
STEP 1
STEP 2

312
2-4. Using other driving systems
PRIUS PHV_OM_OM47856U_(U)
■Cruise control can be set when
●The shift position is in D.
●Ve h i c l e s p e e d i s a b o v e a p p r o x i m a t e l y 2 5 m p h ( 4 0 k m / h ) .
■Accelerating after setting the vehicle speed
●The vehicle can be accelerated normally. After acceleration, the set
speed resumes.
●Even without canceling the cruise control, the set speed can be
increased by first accelerating the vehicle to the desired speed and then
pushing the lever down to set the new speed.
■Automatic cruise control cancelation
Cruise control will stop maintaining the vehicle speed in any of the following
situations.
●Actual vehicle speed falls more than approximately 10 mph (16 km/h)
below the preset vehicle speed.
At this time, the memorized set speed is not retained.
●Actual vehicle speed is below approximately 25 mph (40 km/h).
●Enhanced VSC is activated.
■If the cruise control indicator light flashes
Press the “ON-OFF” button once to deactivate the system, and then press
the button again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels
immediately after being activated, there may be a malfunction in the cruise
control system. Have the vehicle inspected by your Toyota dealer.