Head lights TOYOTA PRIUS PLUS 2012 Owners Manual

1
2
3
4
5
6
3
PRIUS +_OM_OM47821E_(EE)
2-1. Driving procedures
Driving the vehicle .............. 202
Power (ignition) switch ........ 214
EV drive mode .................... 221
Hybrid transmission ............ 224
Turn signal lever ................. 233
Parking brake...................... 234
Horn .................................... 235
2-2. Instrument cluster
Gauges and meters ............ 236
Indicators and warning
lights ................................. 248
Head-up display .................. 253
2-3. Operating the lights
and windshield wipers
Headlight switch.................. 261
Fog light switch ................... 266
Windshield wipers
and washer ....................... 268
Rear window wiper
and washer ....................... 272
Headlight cleaner switch ..... 2742-4. Using other driving systems
Cruise control ..................... 275
Dynamic radar cruise
control .............................. 280
Driving assist systems........ 298
Hill-start assist control ........ 304
PCS (Pre-Crash Safety
System) ............................ 307
2-5. Driving information
Cargo and luggage............. 316
Winter driving tips............... 319
Trailer towing...................... 323
2When driving

8
PRIUS +_OM_OM47821E_(EE)
Pictorial indexExterior
Front fog lights P. 266Headlights
Front position lightsP. 261
P. 261
Hood P. 397
Windshield wipers P. 268Outside rear view mirrors
P. 133
Front turn signal lights P. 233
Side turn signal lights P. 233

131
1
1-4. Adjustable components (seats, mirrors, steering wheel)
Before driving
PRIUS +_OM_OM47821E_(EE)
Inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by
using the following functions:
Manual anti-glare inside rear view mirror
Normal position
Anti-glare position
Auto anti-glare inside rear view mirror
In “AUTO” mode, sensors are used to detect the headlights of vehi-
cles behind and the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
ON/OFF
When the automatic anti-glare
function is in ON mode, the
indicator illuminates.
The function will set to ON
mode each time the “POWER”
switch is turned to ON mode.
Pressing the button turns the
function to OFF mode. (The
indicator also turns off.)
Indicator

2When driving
201
PRIUS +_OM_OM47821E_(EE)
2-1. Driving procedures
Driving the vehicle ............ 202
Power (ignition) switch...... 214
EV drive mode .................. 221
Hybrid transmission .......... 224
Turn signal lever ............... 233
Parking brake ................... 234
Horn .................................. 2352-2. Instrument cluster
Gauges and meters .......... 236
Indicators and warning
lights ............................... 248
Head-up display ................ 253
2-3. Operating the lights
and windshield wipers
Headlight switch................ 261
Fog light switch ................. 266
Windshield wipers
and washer ..................... 268
Rear window wiper
and washer ..................... 272
Headlight cleaner switch ... 274
2-4. Using other driving systems
Cruise control.................... 275
Dynamic radar cruise
control ............................. 280
Driving assist systems ...... 298
Hill-start assist control....... 304
PCS (Pre-Crash Safety
System) .......................... 307
2-5. Driving information
Cargo and luggage ........... 316
Winter driving tips ............. 319
Trailer towing .................... 323

247 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even
when vehicle operation and driving conditions are the same.
Brightness of the instrument cluster light
If the headlight switch is turned to ON while the surrounding area is dark, the
instrument cluster lights will dim.
When disconnecting and reconnecting 12-volt battery terminals
The average fuel consumption and cruising range will be reset.
NOTICE
To prevent damage to the engine and its components
The engine may be overheating if the high coolant temperature warning light
comes on or flashes. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 528)
The trip information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

261
2
When driving
PRIUS +_OM_OM47821E_(EE)
2-3. Operating the lights and windshield wipers
Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
The daytime running
lights turn on.
The front position
lights, tail, license
plate and instrument
panel lights turn on.
The headlights and
all the lights listed
above turn on.
The headlights, front
position lights, and
so on turn on and off
automatically (when
the “POWER” switch
is in ON mode).
(if equipped)

262 2-3. Operating the lights and windshield wipers
PRIUS +_OM_OM47821E_(EE)
Turning on the high beam headlights
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams
with the headlights on or off.
Manual headlight leveling dial (if equipped)
The level of the headlights can be adjusted according to the number
of passengers and the loading condition of the vehicle.
Raises the level of the head-
lights
Lowers the level of the head-
lights

264 2-3. Operating the lights and windshield wipers
PRIUS +_OM_OM47821E_(EE)
Headlight control sensor (if equipped)
Automatic light off system
When the light switch is in the
, , or position: The
headlights turn off automatically if the “POWER” switch is turned to
ACCESSORY mode or OFF.
When the light switch is in the AUTO position: The headlights and all
lights turn off automatically if the “POWER” switch is turned to ACCES-
SORY mode or OFF and the driver’s door is opened.
To turn the lights on again, turn the “POWER” switch to ON mode, or turn the
light switch off once and then back to the
, , or posi-
tion.
The sensor may not function properly if
an object is placed on the sensor, or any-
thing that blocks the sensor is affixed to
the windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight sys-
tem to malfunction.
Air conditioning operation may also be
interrupted.

265 2-3. Operating the lights and windshield wipers
2
When driving
PRIUS +_OM_OM47821E_(EE)
Automatic headlight leveling system (if equipped)
The level of the headlights is automatically adjusted according to the number
of passengers and the loading condition of the vehicle to ensure that the
headlights do not interfere with other road users.
Customization
Settings (e.g. light sensor sensitivity) can be changed.
(Customizable features P. 554)
NOTICE
To prevent 12-volt battery discharge
Do not leave the lights on longer than necessary when the hybrid system is
off.

274
2-3. Operating the lights and windshield wipers
PRIUS +_OM_OM47821E_(EE)
Headlight cleaner switch
: If equipped
The headlight cleaners can be operated when
The “POWER” switch is in ON mode and the headlight switch is turned on.
Windshield washer linked operation
Only for the first time when the windshield washer is operated with the
“POWER” switch in ON mode and the headlights on, the headlight cleaners
will operate once. (P. 268)
NOTICE
When the washer fluid tank is empty
Do not press the switch continually as the washer fluid pump may overheat.
Washer fluid can be sprayed on the headlights.
Press the switch to clean the
headlights.