TOYOTA PRIUS PLUS 2013 Owners Manual

241 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(P. 225)“ECO MODE”
indicator (P. 218)
Tail light indicator
(P. 253)Power mode indicator
(P. 218)
Headlight high beam
indicator (P. 254)
(if equipped)(green)
Cruise control indicator
(P. 267, 272)
(if equipped)
Front fog light indicator
(P. 258)
(if equipped)(green)
Radar cruise control
indicator (P. 272)
Rear fog light indicator
( P. 258)“SET” indicator
(P. 267, 272)
Security indicator
(P. 138, 145)Slip indicator
(P. 293, 297)
“READY” indicator
(P. 206)EV indicator (P. 235)
*1, 2

242 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
*1: These lights turn on when the “POWER” switch is turned to the ON
mode to indicate that a system check is being performed. They will
turn off after the hybrid system is on, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if the
lights do not turn off. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes
faster than usual to indicate that the system is operating.
Eco Driving Indicator
Light (P. 235)
(if equipped)
“PCS” warning
(P. 301)
EV drive mode indica-
tor (P. 213)
SRS airbag on-off
indicator (P. 1 6 6 )
Shift position indicators
(P. 216)
*1*1, 3

243 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Warning lights
Warning lights inform the driver of malfunctions in any of the
vehicle’s systems. (P. 463)
*1: These lights turn on when the “POWER” switch is turned to ON
mode to indicate that a system check is being performed. They will
turn off after the hybrid system is on, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate a malfunction.
(red)
(yellow)(if equipped)(if equipped)
(if equipped)(if equipped)(yellow)(if equipped)(yellow)
*1*1*1*1*1*1*1
*1*1*1*1*1*1*1
*1*1, 2*1*1

244 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
CAUTION
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS airbag warning light
not come on when you start the hybrid system, this could mean that these
systems are not available to help protect you in an accident, which could
result in death or serious injury. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional immediately if this occurs.

245
2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Head-up display
: If equipped
The head-up display can be used to project vehicle speed and other
information onto the windshield.
Head-up display
Display brightness will change
automatically according to the
brightness of the surrounding
area.
“HUD” (Head-up display)
switch
“SET” switch
Display position adjustment
switch
Display brightness adjust-
ment switch
Used to adjust the display
brightness to the desired level.

246 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
Switching the head-up display
On/off
When on, the indicator light on
the “HUD” switch comes on.
Head-up display contents
Speedometer
Displays the vehicle speed.
Touch tracer display
The steering switches operation status is displayed for confirmation
purposes. (P. 247)
Turn-by-turn navigation*
Displays a notification of upcoming intersections during navigation
system route guidance. (P. 248)
Dynamic radar cruise control*
Displays the approach warning. (P. 272)
PCS (Pre-Crash Safety System)*
Indicates that there is a possibility of collision. (P. 300)
*: If equipped

247 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Touch tracer display
When the audio control switches,
climate control switches, “DISP”
button or “TRIP” button of the
steering wheel are touched, the
touch tracer display will appear
in front of the display, with the
touched button highlighted to
allow the driver to identify the
button that is being operated.
The button can then be operated
by further presses.
If an audio/navigation system is
used that is not compatible with
the steering switches in this vehi-
cle, the audio switch display may
not operate correctly.

248 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
Turn-by-turn navigation display (if equipped)
When approaching an intersec-
tion while the navigation system
is giving route guidance, an
arrow will automatically be dis-
played on the head-up display to
indicate the direction of travel.
At one of the following distances
from the intersection, the guid-
ance display will be shown and
the distance to the intersection
will be shown in units of 50 m
(164 ft.).

249 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47841E_(EE)
Setting up the display
Setting the brightness
The brightness of the display is automatically adjusted in accor-
dance with the brightness of the surrounding environment. How-
ever, the brightness can also be manually adjusted in 5 stages.
Brighter
Darker
The brightness can be manually
adjusted in 5 stages.
Adjusting the display position
Higher
Lower

250 2-2. Instrument cluster
PRIUS +_OM_OM47841E_(EE)
Customizing the display
The following display can be shown or hidden.
Turn-by-turn navigation display (if equipped)
Touch tracer display
Temperature display which is set by the steering switches.
Press and hold the “SET” switch.
Customization can be performed
when the head-up display is on
and the vehicle is traveling at less
than 8 km/h (5 mph).
Press the “SET” switch and
select the item.
Turn-by-turn navigation dis-
play (if equipped)
Touch tracer display
Temperature display which is
set by the steering switches.
STEP 1
STEP 2