ECU TOYOTA PRIUS PLUS 2013 Owners Manual

72 1-3. Opening, closing and locking the doors
PRIUS +_OM_OM47841E_(EE)
Security feature
If a door is not opened within approximately 30 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
Battery-saving function
The battery-saving function will be activated in order to prevent the elec-
tronic key battery and the 12-volt battery from being discharged while the
vehicle is not in operation for a long time.
In the following situations, the smart entry & start system may take some
time to unlock the doors.
• The electronic key has been left in an area of approximately 2 m (6 ft.)
of the outside of the vehicle for 10 minutes or longer.
• The smart entry & start system has not been used for 5 days or longer.
If the smart entry & start system has not been used for 14 days or longer,
the doors cannot be unlocked at any doors except the driver’s door. In
this case, take hold of the driver’s door handle, or use the wireless
remote control or the mechanical key, to unlock the doors.
AlarmSituationCorrection procedure
Interior alarm
pings continu-
ouslyThe “POWER” switch was
turned to ACCESSORY
mode while the driver’s
door was open (or the
driver’s door was opened
while the “POWER” switch
was in ACCESSORY
mode)Close the driver’s
door, or turn the
“POWER” switch off
The driver’s door is open
with the shift position in RClose the driver’s
door, shift the shift
position to P, or turn
the “POWER” switch
off

88 1-3. Opening, closing and locking the doors
PRIUS +_OM_OM47841E_(EE)
Security feature
P. 7 2
Conditions affecting operation
P. 7 3
If the wireless remote control does not operate properly
Locking and unlocking the doors: Use the mechanical key. (P. 513)
Electronic key battery depletion
P. 7 7
When the electronic key battery is fully depleted
P. 424
Customization
Settings (e.g. door unlocking function) can be changed.
(Customizable features P. 548)

95 1-3. Opening, closing and locking the doors
1
Before driving
PRIUS +_OM_OM47841E_(EE)
CAUTION
Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the body to be caught, resulting in death
or serious injury.
Remove any heavy loads, such as snow and ice, from the back door
before opening it. Failure to do so may cause the back door to suddenly
shut again after it is opened.
When opening or closing the back door, thoroughly check to make sure
the surrounding area is safe.
If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.
Use caution when opening or closing the back door in windy weather as it
may move abruptly in strong wind.
The back door may suddenly shut if it is
not opened fully. It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.

102
1-4. Adjustable components (seats, mirrors, steering wheel)
PRIUS +_OM_OM47841E_(EE)
Second seats
Moving a second seat for third seat access
Pull up the lever (either or
), tilt the seatback forward,
and slide the seat forward.
After getting in or out of the vehi-
cle, slide the seat backward and
raise the seatback.
Gently rock the seat back and
forth to ensure that it is securely
locked.
Seatback angle adjustment
lever
Seat position adjustment
lever

104 1-4. Adjustable components (seats, mirrors, steering wheel)
PRIUS +_OM_OM47841E_(EE)Press the seat-folding button.
The seats will be folded forward.
Gently rock the seats back and
forth to ensure that they are
securely locked.
Pull the lever.
To return the rear seatbacks to
their original positions, lift them
up until they lock.
STEP 2
STEP 3
Adjusting the position of the outside seat back and forward
The seat cannot be locked if it slides for-
ward as far as possible. After operating,
return the seat to a lockable position, and
secure it firmly in place.

106 1-4. Adjustable components (seats, mirrors, steering wheel)
PRIUS +_OM_OM47841E_(EE)
CAUTION
Reclining adjustment
To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
After adjusting the seat, make sure that the seat is locked in position.
After returning the seatback to the upright position
Observe the following precautions. Failure to do so may result in death or
serious injury.
Make sure that the seatback is securely locked in position by lightly push-
ing it back and forth.
Check that the seat belts are not twisted or caught in the seatback.
Re-couple the second center seat belt if it has been uncoupled. (P. 116)
If the seat belt has been stowed using the seat belt hanger, check that the
seat belt has been removed from the hanger. (P. 105)
After tilting the second seatback forward when getting in or out of the
vehicle etc.
Slide the seat backward and raise the seatback, and check that the seat is
securely locked.
If the seat is not locked, the seat may unexpectedly move and cause death
or serious injury.

111 1-4. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
PRIUS +_OM_OM47841E_(EE)
CAUTION
Reclining adjustment
To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
After adjusting the seat, make sure that the seat is locked in position.
After returning the seatback to the upright position
Observe the following precautions. Failure to do so may result in death or
serious injury.
Make sure that the seatback is securely locked in position by lightly push-
ing it back and forth.
Check that the seat belts are not twisted or caught in the seatback.
If the seat belt has been stowed using the seat belt hanger, check that the
seat belt has been removed from the hanger. (P. 105)
NOTICE
When the third seat is folded forward
P. 107

116 1-4. Adjustable components (seats, mirrors, steering wheel)
PRIUS +_OM_OM47841E_(EE)
Fastening the seat belt (second center seat)
Press the plate to release, and
pull out the seat belt.
Connect by inserting plate B
into buckle B until a click
sound is heard.
Secure the belt by inserting
plate A into buckle A until a
click sound is heard.
STEP 1
STEP 2 Plate B
Buckle B
STEP 3
Plate A
Buckle A

125
1
1-4. Adjustable components (seats, mirrors, steering wheel)
Before driving
PRIUS +_OM_OM47841E_(EE)
Steering wheel
CAUTION
Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.
After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an
accident, and resulting in death or serious injury.
The steering wheel can be adjusted to a comfortable position.
Hold the steering wheel and
push the lever down.
Adjust to the ideal position by
moving the steering wheel
horizontally and vertically.
After adjustment, pull the lever
up to secure the steering
wheel.
STEP 1
STEP 2

137 1-6. Refueling
1
Before driving
PRIUS +_OM_OM47841E_(EE)
CAUTION
When refueling
Securely insert the fuel nozzle into the fuel filler neck. If fuel is added with
the nozzle slightly lifted away from the fuel filler neck, the automatic shut off
function may not operate, resulting in fuel overflowing from the tank.
When replacing the fuel tank cap
Do not use anything but a genuine Toyota fuel tank cap designed for your
vehicle. Doing so may cause a fire or other incident which may result in
death or serious injury.
NOTICE
Refueling
Do not spill fuel during refueling.
Doing so may damage the vehicle, such as causing the emission control
system to operate abnormally or damaging fuel system components or the
vehicle’s painted surface.