lock TOYOTA PRIUS V 2012 Accessories, Audio & Navigation (in English)

TOYOTA — RS3200 PLUS Security System Page 12
PROGRAMMING
The RS3200 PLUS is factory-set to not PASSIVELY ARM. To change the system’s
operation for PASSIVE ARMING operation, as well as adjust the ENTRY DELAY time,
follow the procedure below. For more information on this feature, please refer to page
7. (Not applicable to Highlander and Sienna. Please consult your Toyota Dealer for
programming information.)
PASSIVE ARMING ON/OFF SELECTION, ENTRY DELAY TIME SELECTION
1.

Before you begin:
Open the driver

’s door. Close the remaining
doors and the trunk or hatch. Unlock all doors
with the inside lock switch. Remove the key
from the
ignition
switch.
d. Lock , then unlock
the driver’s door
inside lock button
3 times.
f. The system locks the door
in 2 seconds; if this does not
happen, start over
.
Start the Programming Procedure. (Complete these steps within 40 seconds.)
b. Lock then unlock the
driver’s door inside lock
button 1 time.c. The system locks the door
in 2 seconds; if this does
not happen, start over.
Programming is now
complete.
3. Select the Operating Mode and Complete the Programming Procedure.
a. Close, then Open the driver ’s
door:
2 times = PASSIVE ARMING OFF
3 times = PASSIVE ARMING ON,
0 Sec. ENTR

Y DELAY
4 times = PASSIVE ARMING ON,
15 Sec. ENTR

Y DELAY
5 times = PASSIVE ARMING ON,
30 Sec. ENTR

Y DELAY
a. Close the
driver’s door. b.
Lock and unlock all doors
3 times by key or remote
control.c. Open and close
the driver ’s
door.
e.

Open the
driver

’s door.
g. Unlock the driver ’s
door knob.
2. Insert and remove the key from the igni-
tion key cylinder 3 times; this must be
completed within 5 seconds.

Page 13 T OYOTA — RS3200 PLUS Security System
Warning
• This product is applicable only to vehicles with 12V DC, negative ground\
ing
specifications. Do not use in vehicles with 24V specifications. Otherwis\
e, damage
to the unit or a fire may result.
•

Never attempt to disassemble or modify the product. Otherwise, an accide\
nt, fire
or electric shock may result.
•


When replacing fuses, be sure to use fuses with the same specified capac\
ity
(amperage.) Otherwise, damage to the unit or vehicle, fire or electric\
shock may
result.
•


If an abnormal condition occurs, such as liquids spilling onto the produ\
ct, or the
product emitting smoke or strange odors, stop using it immediately and c\
onsult
the dealer from whom you purchased the product. Continued use of the pro\
duct
before corrective actions are taken may result in an accident, injury or\
fire.
•


Never pull the plastic bag over your head. Otherwise, a serious injury o\
r death
from suf

focation may occur.

Caution
• Do not use this product for applications other than in-vehicle use. Othe\
rwise, an
electric shock or injury may result.
•

Do not allow children to play with the remote controls. Otherwise, the d\
oors may
be locked or unlocked, the security system armed or disarmed, or an alar\
m
triggered unintentionally

.
•

If this product is dropped or its case is damaged, disconnect the power \
supply
lead and contact the dealer from whom you purchased it to obtain service\
. Other-
wise, a fire or electric shock may result.