light TOYOTA PRIUS V 2012 Owners Manual (in English)

425
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
■
Daytime running lights and headlight high beams
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 423)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Unplug the connector while
pressing the lock release.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

426 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
■Parking lights
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 423)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

427
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
■
Front side marker lights
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 423)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

428 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
■Fog lights (if equipped)
Remove the engine under cover
bolts and pull down the engine
under cover.
Unplug the connector while
pressing the lock release.
STEP 1
STEP 2

430 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
■Front turn signal lights
Remove the engine under cover bolt and clip and pull down
the engine under cover. ( P. 428)
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P144
STEP 3
STEP 4

431
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
■
Rear turn signal lights and back-up lights
Open the back door and remove
the cover.
To prevent damage, cover the tip
of the screwdriver with a rag.
Turn the bulb base counterclock-
wise.
Rear turn signal light
Back-up light
Remove the light bulb. Rear turn signal light
Back-up light
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P147
STEP 3
STEP 4

432 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
■License plate lights
Open the back door and remove
the cover.
To prevent damage, cover the tip
of the screwdriver with a rag.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P150
STEP 3
STEP 4

433
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
■
Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
● Headlight low beams (LED type)
● Stop lights
● Tail lights
● Rear side marker lights
● High mounted stoplight
■LED lights
The headlight low beams (LED type), stop lights, tail lights, rear side marker
lights and high mounted stoplight consist of a number of LEDs. If any of the
LEDs burn out, take your vehicle to your Toyota dealer to have the light
replaced.
■ Condensation build-up on th e inside of the lens
Contact your Toyota dealer for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
● Large drops of water have built up on the inside of the lens.
● Water has built up inside the headlight.
■ When replacing light bulbs
 P. 419

434 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
CAUTION
■Replacing light bulbs
● Be sure to stop the hybrid system and turn off the lights. Do not attempt to
replace the bulb immediately after turning off the lights.
The bulbs become very hot and may cause burns.
● Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped, it may blow out or crack.
● Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
■ To prevent damage or fire
Make sure bulbs are fully seated and locked.

When trouble arises5
435
PRIUS v_U (OM47784U)
5-1. Essential informationEmergency flashers ......... 436
If your vehicle needs to be towed ............................. 437
If you think something is wrong ............................. 443
5-2. Steps to take in an emergency
If a warning light turns on or a warning buzzer
sounds ........................... 444
If you have a flat tire......... 462
If the hybrid system will not start .......................... 476
If you lose your keys ........ 478
If the electronic key does not operate properly....... 479
If the 12-volt battery is discharged ..................... 481
If your vehicle overheats ....................... 487
If the vehicle becomes stuck .............................. 491
If your vehicle has to be stopped in an
emergency ..................... 493