head lining TOYOTA PROACE VERSO 2019 Owners Manual

101
Head restraints
F To raise a head restraint, pull it up until it engages in its notch.F To remove it, press the lug A and pull the head restraint up.F To refit it, engage the head restraint rods in the apertures keeping them in line with the seat backrest.F To lower it, press on the lug A and on the head restraint at the same time.
Rear seat and bench seat on rails
The different equipment and adjustments described hereafter vary according to the version and configuration of your vehicle.
For more information on the Seat belts, refer to the corresponding section.
F To recline the backrest, raise the control (from the rear, lower the lever).F Release the control when the desired position is obtained.
Reclining the backrest
The reclining backrest can be adjusted to several positions.
The individual seat is always on the right and the bench seat on the left (facing for ward).The bench seat has two independent backrests.
3
Ease of use and comfort

106
Folding the seat backrest to
the table position
F Place the head restraints in the low position.
Moving forward or backward
Two controls are provided for moving the seat for ward and backward:
F From the front, raise the control and slide the seat for ward or back.F From the rear, pull the strap without going beyond the point of resistance and push the seat for ward or pull it back.
Reclining the backrest
The reclining backrest can be adjusted to several positions.
F To recline the backrest, raise the control (from the rear, lower the lever).F Release the control when the desired position is obtained.
F From the front, raise the handle to release the backrest.F From the rear, lower the handle to release the backrest.F Fold the backrest onto the cushion.
Ease of use and comfort