oil change TOYOTA RAIZE 2023 Owners Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2023, Model line: RAIZE, Model: TOYOTA RAIZE 2023Pages: 516, PDF Size: 44.62 MB
Page 96 of 516

942-1. Instrument cluster
RAIZE_OM_General_BZ358E✽
: If equipped
⬛How to initialize settings
a Press and hold the switch while Odometer is displayed to switch to the
user customization screen
b Press the switch until appears
c While is displayed, press and hold the switch. After
appears, press and hold the switch again
After starts flashing, go back to the odometer display to see the fol-
lowing items are initialized.
Engine oil deterioration warning reset✽
Perform this operation after th e engine oil has been changed.
When the engine oil is deteriorated or the engine oil replacement is due soon, the Oil
deteriorate warning light will turn on ( ➞P. 382).
a Press the ODO/TRIP switch to
display trip meter A
b Turn the engine switch to “OFF”
c While pressing the ODO/TRIP
switch, turn “ON” the engine
switch
Do not start the engine yet.
Keep holding the ODO/TRIP switch
until the Oil deteriorate warning light
turns off.
dCheck that the Oil deteriorate
warning light is flashing fast
ItemInitial setting
Resetting average fuel economy when fuelingOFF
Resetting Trip meter A when fuelingOFF
On/Off of Eco Driving Indicator LightON
Automatic correction of time (for vehicles equipped with 9 inch dis-
play audio pairable with smart phones)ON
KBRO210342E
RAIZE_OM_General_BZ358E.book 94 ページ 2022年5月17日 火曜日 午後1時59分
Page 106 of 516

1042-1. Instrument cluster
RAIZE_OM_General_BZ358E✽
: If equipped
Settings
While the vehicle is parked with the engine switch turned “ON”, you can
specify or adjust the display and configure the function settings by press-
ing the / switch to change the menu to .
Note that the screen is not operable while the vehicle is running. Be sure
to operate the screen when the ve hicle is stopped in a safe place.
The following items can be set and adjusted.
⚫Instrument panel illumination
adjustment (➞ P. 104)
⚫Time and date ( ➞P. 105)
⚫Display options ( ➞P. 106)
⚫Screens ( ➞P. 1 0 0 )
⚫Buzzers (➞ P. 107)
⚫Notification dates ( ➞P. 108)
⚫BSM/RCTA✽ (➞ P. 109)
⚫Door lock ( ➞P. 109)
⚫Windshield wipers ( ➞P. 110)
⚫Turn signal lights ( ➞P. 111)
⚫Maintenance ( ➞P. 111)
⚫Engine oil deterioration warning
reset
✽ (➞ P. 112)
⚫Initialization of display settings
(➞ P. 113)
⚫Language (➞ P. 114)
⬛Instrument panel illumination adjustment
Day illumination or ni ght illumination (➞P. 114) for the meter can be
adjusted.
(Initial setting: ➞P. 113)
a Press / switch to switch menu to
b Press the / switch and select “Display Brightness”, and then
press the ENTER switch
c After pressing the ENTER switch, pr ess / switches to adjust the
brightness
⦁ After is displayed, press / to adjust the brightness, and then press
the ENTER switch again.
⦁ Adjust day illumination by turnin g off the front position lights.
⦁ Adjust night illumination by turning on the front position lights.
⦁ Illumination can be adjusted in 10 steps.
RAIZE_OM_General_BZ358E.book 104 ページ 2022年5月17日 火曜日 午後1時59分
Page 114 of 516

1122-1. Instrument cluster
RAIZE_OM_General_BZ358E✽
: If equipped
e Press / switch to select di stance and press the ENTER switch
⦁After appears, use / switch to set the distance, and press the
ENTER switch again.
⦁ If the distance is already set, the distance to go before the next notification time
is displayed.
⦁ To reset the distance, press / switch to select “Reset” and press the
ENTER switch.
⬛Engine oil deterioration warning reset✽
Perform this operation after th e engine oil has been changed.
When the engine oil is deteriorated or the engine oil replacement is due soon, a mes-
sage reminding you of changing the engine oil will appear ( ➞P. 392).
a Press / switch to switch menu to
b Press and hold the / switch or press it several times to switch
the “Settings” screen, select “Oil De teriorate WNG Reset” and press the
ENTER switch
c Press the / switch to select “Yes”, and then press the ENTER
switch
Make sure that “Reset Completed” is displayed.
RAIZE_OM_General_BZ358E.book 112 ページ 2022年5月17日 火曜日 午後1時59分
Page 115 of 516

1132-1. Instrument cluster
RAIZE_OM_General_BZ358E
Instrument cluster
2
⬛Initialization of display settings
Display settings can be initialized (default setting).
a Press / switch to switch menu to
b Press and hold the / switch or press it several times to switch the
“Settings” screen, select “Reset Settings” and press the ENTER switch
c Press the / switch to select “Y es”, and then press the ENTER switch
Items in the following table are initialized.
ItemInitial setting
“Display Brightness”For day illuminationLevel 8
For night illuminationLevel 6
“Time and Date”“Auto Time ADJ”“ON”
“12H/24H”“24H”
“Designs”“Disp.1”
“Display Settings”
“Eco Indicator Light”“ON”
“AVG Fuel Reset after Refuel”“OFF”
“Trip A Reset after Refuel”“OFF”
“Opening Display”“ON”
“Ending Display Type”“STD”
“Steering Angle”“ON”
“Buzzer”
“Turn Signal Tone Type”“1”
“Opening Sound Volume”“2”
“BSM Buzzer Volume”“2”
“RCTA Buzzer Volume”“2”
“Notification Day
Settings”“Date 1” - “Date 10”“(Not Set)”
“Maintenance Set- tings”“Oil Change Timing Notice”“OFF”
“Oil Filter Change Timing Notice”“OFF”
“Tire Rotation Timing Notice”“OFF”
“Language”“English”
RAIZE_OM_General_BZ358E.book 113 ページ 2022年5月17日 火曜日 午後1時59分
Page 178 of 516

1764-1. Driving the vehicle
RAIZE_OM_General_BZ358E
NOTICE
⬛If you feel the clutch is slipping (Manual transmission vehicles)
Have the vehicle inspected at your Toyota dealer as soon as possible. If your
vehicle does not accelerate by stepping on the accelerator pedal even when
the clutch is engaged, the clutch ma y be slipping and the vehicle may no
longer be able to run.
⬛To prevent damage to the tu rbo system (Turbo vehicles)
⚫Immediately after driving at high speed or climbing on a hill, do not stop the
engine. Make sure to idle the engine for approx. 1 minute to cool down the
turbo system, and then stop the engine.
⚫Do not use any parts other than those specified for the exhaust pipes.
⚫Never alter the exhaust pipes.
⚫Never race or accelerate suddenly when the engine is cold.
⚫Make sure to change the oil periodically. ( ➞P. 418)
⬛When encountering flooded roads
Do not drive on a road that has flooded after heavy rain, etc. Doing so may
cause the following serious damage to the vehicle:
⚫Engine stalling
⚫Short in electrical components
⚫Engine damage caused by water immersion
In the event that you drive on a flooded road and the vehicle is flooded, be
sure to have your Toyota dealer check the following:
⚫Brake function
⚫Changes in quantity and quality of oi ls and fluids such as engine oil,
transaxle oil, and differential oil
⚫Poor lubrication of the bearings and joints, etc.
RAIZE_OM_General_BZ358E.book 176 ページ 2022年5月17日 火曜日 午後1時59分
Page 233 of 516

2314-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving
4
NOTICE
⬛Camera handling
⚫Be careful with the following since they could cause the rear-view camera to
malfunction.
⦁Do not install any item around the camera, which could interfere with the
camera’s field of view (such as an item blocking the view or light-emitting
objects, items made of shiny materials).
⦁ Do not apply strong impact to the ca mera unit, such as hitting it hard or
bumping it against another object. Doing so could cause the camera posi-
tion or mounting angle to be deviated.
⦁ The camera unit has a waterproof structure. Do not remove, disassemble
or alter it.
⦁ When you wash the camera lens, use water to wash the dirt off from the
camera and wipe it off with a so ft cloth dampened with water.
If you rub the camera lens too hard, it could scratch the camera lens, and
you will not be able to see clear images.
⦁ The camera’s cover is made of resin. Do not allow organic solvents, body
wax, oil film remover, and glass coating agent to get attached to it. If they
get attached, wipe it off immediately.
⦁ Do not expose it to rapid temperature changes, such as by pouring hot
water over it in cold weather.
⦁ Do not splash water directly to the camera or areas around the camera
using a high-pressure washer during a car wash. The high water pressure
adds stress and may prevent the system from working properly.
⚫Applying shock to the camera unit may cause the camera to malfunction.
Have the vehicle inspected at your Toyo ta dealer in your earliest conveni-
ence.
RAIZE_OM_General_BZ358E.book 231 ページ 2022年5月17日 火曜日 午後1時59分
Page 297 of 516

2956-2. Maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
Maintenance schedule (except for Mexico)
Maintenance operations : I = Inspect, correct or replace as necessaryR = Replace, change or lubricate
SERVICE
INTERVAL:ODOMETER READING
MONTHS(Odometer reading or months,
whichever
comes first.) x1000
km 1 1020304050607080
x1000 miles 1 6 12 18 24 30 36 42 48
BASIC ENGINE COMPONENTS
1Valve clearance
(1KR-VET engine)I96
2Drive beltsIIII24
3Engine oil
(WA-VE engine)RRRRRRRR6
4Engine oil
(1KR-VET engine)Replace when the maintenance reminder
appears.*
1―
5Engine oil filter
(WA-VE engine)RRRRRRRR6
6Engine oil filter
(1KR-VET engine)Replace when the maintenance reminder
appears.*
1―
7Cooling and heater
system*
2II24
8Engine coolantFirst replace at 160000 km (100000 miles),
then replace every 80000 km (48000 miles)―
9Exhaust pipes and
mountingsIIII12
IGNITION SYSTEM
10Spark plugsReplace at every 100000 km (60000 miles)―
11BatteryIIIIIIIII12
RAIZE_OM_General_BZ358E.book 295 ページ 2022年5月17日 火曜日 午後1時59分
Page 299 of 516

2976-2. Maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
*1Replace both the engine oil and oil filter, even when the maintenance
reminder does not appear, after 6 mont hs have passed, since the last oil
change.
*2After 80000 km (48000 miles) or 48 months inspection, inspect every 20000
km (12000 miles) or 12 months.
*3Including the filter in fuel tank.
25Drive shaft bootsIIIIIIII6
26Front wheel align-
ment (toe-in)II48
27Suspension ball joint
and dust coverIIII12
28
Manual transmis-
sion oil (including
front differential)
IRI: 48
R: 96
29
Continuously varia-
ble transmission
fluid (including front
differential)
Inspect every 12 months, Replace every
100000 km (60000 miles)―
30Front and rear sus-
pensionIIII12
31Tires and inflation
pressureIIIIIIII6
32Lights, horns, wipers
and washersIIIIIIII6
33Air conditioning filterRRRR24
SERVICE
INTERVAL:ODOMETER READING
MONTHS
(Odometer reading or months,
whichever
comes first.) x1000
km 1 1020304050607080
x1000 miles 1 6 12 18 24 30 36 42 48
RAIZE_OM_General_BZ358E.book 297 ページ 2022年5月17日 火曜日 午後1時59分
Page 303 of 516

3016-2. Maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
Maintenance schedule (For Mexico)
Maintenance operations : I = Inspect, correct or replace as necessary
R = Replace, change or lubricate
SERVICE
INTERVAL:ODOMETER READING
MONTHS(Odometer reading or months,
whichever
comes first.) x1000
km 10 20 30 40 50 60 70 80
x1000 miles 6 12182430364248
BASIC ENGINE COMPONENTS
1Valve clearanceI96
2Drive beltsIIII24
3Engine oilReplace when the main
tenance reminder
appears.
* 1―
4Engine oil filterReplace when the main tenance reminder
appears.
* 1―
5Cooling and heater
system
*2II24
6Engine coolantFirst replace at 160000 km (100000 miles),
then replace every 80000 km (50000 miles)―
7Exhaust pipes and
mountingsIIII12
IGNITION SYSTEM
8Spark plugsReplace at every 100000 km (60000miles)―
FUEL AND EMISSION CONTROL SYSTEMS
9Fuel filter*
3R96
10Air cleaner filterIRIRI: 24
R: 48
11
Fuel tank cap, fuel
lines, connections
and fuel vapor con-
trol valve*
2
II24
12Charcoal canisterII24
RAIZE_OM_General_BZ358E.book 301 ページ 2022年5月17日 火曜日 午後1時59分
Page 305 of 516

3036-2. Maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
REMARKS: See page 306 for general maintenance items.
*1Replace both the engine oil and oil filter, even when the maintenance
reminder does not appear, after 6 mont hs have passed, since the last oil
change.
*2After 80000 km (48000 miles) or 48 months inspection, inspect every 20000
km (12000 miles) or 12 months.
*3Including the filter in fuel tank.
Additional maintenance schedule (For Mexico)
Refer to the following table for normal maintenance schedule items
requiring more frequent service specific to the type of severe conditions.
(For outline, see “Maintenan ce schedule requirements”.)
A-1: Operating on rough or muddy roads, or roads with melted snow
Inspection*
1 of brake linings and drums
(include parking brake linings and drums)Every 10000 km (6000 miles) or 6
months
Inspection* 1 of brake pads and discsEvery 10000 km (6000 miles) or 3
months
Inspection*1 of brake pipes and hosesEvery 10000 km (6000 miles) or 6
months
Inspection*1 of steering wheel, linkage
and steering gear boxEvery 5000 km (3000 miles) or 3
months
Inspection* 1 of suspension ball joint and
dust coversEvery 10000 km (6000 miles) or 6
months
Inspection* 1 or replacement of continu-
ously variable transmission fluid (includ-
ing front differential)I: Every 5000 km (3000 miles) or 3 months
R: Every 50000 km (30000 miles)
Inspection* 1 of front and rear suspensionEvery 10000 km (6000 miles) or 6
months
Tightening of bolts and nuts on chassis
and body
*2Every 10000 km (6000 miles) or 6
months
A-2: Operating on dusty ro ads (Roads in areas where their pavement rate is
low, or a cloud of dust ofte n arises and the air is dry.)
Replacement of engine oilReplace when the maintenance
reminder appears.
*
3
RAIZE_OM_General_BZ358E.book 303 ページ 2022年5月17日 火曜日 午後1時59分