page 1237 TOYOTA RAV4 1996 Service Repair Manual

LU0O4−01
S01775S01237B13839
M/T
A/T
S01375
P04282
SST
SST
− LUBRICATIONOIL PUMP
LU−7
1996 RAV4 (RM447U)
REMOVAL
HINT:
When repairing the oil pump, the oil pan and strainer should be
removed and cleaned.
1. REMOVE HOOD
2. REMOVE RH ENGINE UNDER COVER
3. DRAIN ENGINE OIL
4. REMOVE FRONT EXHAUST PIPE (See page EM−33)
5. REMOVE STIFFENER PLATE
Remove the 2 bolts (M/T) or 3 bolts (A/T) and stiffener plate.
6. REMOVE OIL PAN
(a) Remove the dipstick.
(b) Remove the 17 bolts and the 2 nuts.
(c) Insert the blade of SST between the cylinder block and oil
pan, and cut off applied sealer and remove the oil pan.
SST 09032−00100
NOTICE:
Do not use SST for the oil pump body side and rear oil
seal retainer.
Be careful not to damage the oil pan flange.

S01775S01237B13839
A/T M/T LU−16
− LUBRICATIONOIL PUMP
1996 RAV4 (RM447U)
9. INSTALL STIFFENER PLATE
Install the stiffener plate with the 2 bolts (M/T) or 3 bolts (A/T).
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
10. INSTALL FRONT EXHAUST PIPE (See page EM−55)
11. FILL WITH ENGINE OIL
12. START ENGINE AND CHECK FOR LEAKS
13. RECHECK ENGINE OIL LEVEL
14. INSTALL RH ENGINE UNDER COVER
15. INSTALL HOOD