’04 Rav4_U (L/O 0403)
183
2004 RAV4 from Mar. ’04 Prod. (OM42568U)
When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.If the center panel does not contact your
garage door opener transmitter:
Check to see if spacer is on the cor-
rect pin.
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
Keep the remaining spacers away
from children.
’04 Rav4_U (L/O 0403)
184
2004 RAV4 from Mar. ’04 Prod. (OM42568U)
To use the auxiliary boxes, open as
shown in the following illustrations.
Type C and D auxiliary boxes are
equipped with a belt to hold the objects
such as first aid kit. See “—Using the
holding belts” on page 185 for detailed
information.
Type E auxiliary box is also designed
to store the warning reflector.
The first −aid kit or warning reflector itself
is not included as an original equipment.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the auxiliary box closed
while driving.
NOTICE
Type A: During hot weather, the inte-
rior of the vehicle becomes very hot.
Do not leave anything flammable or
deformable such as a lighter, glasses,
etc. inside.
Type A (front ceiling)
Type B (instrument panel)
Type C (left side of luggage compartment)
Type D (right side of luggage compart-
ment)
Auxiliary boxes—
’04 Rav4_U (L/O 0403)
185
2004 RAV4 from Mar. ’04 Prod. (OM42568U)
Type E (luggage compartment floor)Type C (left side of luggage compartment)
Type D (right side of luggage compart-
ment)
These auxiliary boxes are equipped with
a belt to hold the objects.
Type D auxiliary box—This belt is de-
signed to hold the first aid kit.
To use the belt, do the following.1. To loosen: Pull the buckle forward.
2. To tighten: Pull the belt.
Make sure the objects are securely held.
—Using the holding belts