brake TOYOTA RAV4 2017 XA40 / 4.G Quick Reference Guide

1
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
INDEX
Engine maintenance 9
Fuel tank door release & cap 8
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Keyless entry1 6-7
Light control-Instrument cluster 9
Smart Key system1 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONS
FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES
TOYOTA SAFETY SENSE™ P (TSS-P)Air conditioning/heating 23
All-Wheel Drive Lock
(AWD models) 13
Audio 18-19
Auto lock/unlock1 10
Automatic transmission 10
Bird’s Eye View Camera
with Perimeter Scan function 20
Blind Spot Monitor (BSM) with
Rear Cross Traffic Alert (RCTA) 24
Clock 17
Cruise control 25
Cup holders 21
Door locks 14
Door-Non-Power Liftgate 16
Door-Power Liftgate 15
ECO drive mode 13
Garage door opener (Homelink®)3 16
Lights1,2 & turn signals1 11-12
Moon roof 17
Multi-Information Display (MID)2 21
Parking brake 11
Power outlets-12V DC 20
Seat adjustments-Front 14
Seat adjustments-Rear 14
Seat heaters 22
Seats-Head restraints 14
Sport drive mode 13
Steering wheel-Heater 22
Steering wheel switches &
telephone controls (Bluetooth®) 22
Tilt & telescopic steering wheel 11
USB/AUX Port 19
Vehicle Stability Control
(VSC) OFF button 24
Windows-Power 16
Windshield wipers & washers 12
Automatic High Beams (AHB) 35
Dynamic Radar
Cruise Control (DRCC) 32-34
Lane Departure Alert with Steering
Assist function (LDA w/SA) 29-32
Pre-Collision System with Pedestrian
Detection function (PCS w/PD) 27-29
Quick overview-
Toyota Safety Sense™ P (TSS-P) 26
Sensors 26
BLUETOOTH® DEVICE PAIRING SECTION 40-49
Doors-Child safety locks 37
Floor mat installation 39
Seat belts 36
Seat belts-Shoulder belt anchor 37
Spare tire & tools 37
Star Safety SystemTM 38-39
Tire Pressure Monitoring
(warning) System (TPMS) 36
106464_2017_RAV4_QRG_D5_R1.indd 19/22/16 8:00 AM

4
OVERVIEW
Instrument cluster
For details, refer to “Indicators and warning lights,” Section 2-2, 2017 Owner’s
Manual.
Airbag warning4
Automatic Transmission fluid temperature warning1,4
Cruise control indicator/Cruise control SET indicator
All-Wheel Drive lock indicator1
AUTO Limited SlipDifferential indicator1
Anti-lock Brake System warning4
Automatic High Beam (AHB)indicator4
Blind Spot Monitor (BSM) warning1
Dynamic Radar Cruise Control (DRCC) indicator
Blind Spot Monitor outside
mirror indicators1,4
Arrow direction indicates fuel tank door position
Indicator symbols
Charging system warning1,4
Brake system warning4
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
1 If equipped.2 The indicator flashes to indicate that the system is operating.3 Light flashes to indicate a malfunction.
Service indicators and reminders
TachometerSpeedometer
Fuel gauge
Shift position and shift range
Multi-Information Display (MID)Outside temperature displayOdometer/Trip meter
Temperature gauge
106464_2017_RAV4_QRG_D5_R1.indd 49/22/16 10:45 AM

7
OVERVIEW
FEATURES
& OPERATIONS
TOYOTA
SAFETY
SENSE
SAFETY
& EMERGENCY
FEATURES
Smart Key system
Type A
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “ENGINE START STOP” switch
will change the operation mode in succession from:
Push and hold
PANIC BUTTON
PushDepress brake pedal
Off - All systems OFF.
Accessories - Some electrical components can be used.
On - All electrical components can be used; engine not running.
Type B
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
106464_2017_RAV4_QRG_D5_R1.indd 79/22/16 8:11 AM

10
* The “ENGINE START STOP” switch/ignition switch must be “ON” and the brake
pedal depressed to shift from Park.
Shift the shift lever to “S” position from “D” position.
+ : Upshift (push and release)
- : Downshift (pull and release)
Downshifting increases power going uphill, or provides engine braking downhill. For
best fuel economy during normal driving conditions, always drive with the shift lever
in the “D” position.
Auto lock/unlock
Automatic transmission
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-(With Smart Key system) Doors lock when the vehicle speed goes above
approximately 12 mph.
Driver’s door linked door unlocking function
-(Without Smart Key system) Doors unlock when the engine switch is set from “ON”
to “ACC” or “LOCK” and driver’s door is opened.
-(With Smart Key system) Doors unlock when the engine switch is set to OFF and
driver’s door is opened.
Refer to the Owner’s Manual for more details.
Park*P
ReverseR
NeutralN
DriveD
S“S” mode
FEATURES & OPERATIONS
“S” (SEQUENTIAL) MODE
106464_2017_RAV4_QRG_D5_R1.indd 109/22/16 8:13 AM

11
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Tilt & telescopic steering wheel
Lights & turn signals
Parking brake
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Lock release leverAngle
Pull
(2) Push
(1) Pull slightly(3) Lower
SetRelease
Daytime Running Light system (DRL)
Automatically turns on the headlights at a reduced intensity.
Automatic On/Off1
The side marker, parking, tail, license plate, instrument panel and headlights turn
on and off automatically
Automatic Off1
Automatically turns lights off after a delay of 30 seconds, or when the lock switch
on remote is pushed after all the doors are locked.
Automatic High Beam
Designed to automatically turn on or off high beams as necessary.
1 If equipped.
Type A
Type C
Type B
HEADLIGHTS
Parking lights
Parking lights
Low beam
High beam flasher
Highbeam
Auto
DRL ON
Headlights
Headlights
DRL OFF
Parking lights
DRL ON
Headlights
OFF
106464_2017_RAV4_QRG_D5_R1.indd 119/22/16 8:13 AM

1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Refer to the Owner’s Manual for more details.
25
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Cruise control
TURNING SYSTEM ON/OFF
FUNCTIONS
Buzzer
System ON/OFF
Indicators and set speedIndicators
Set/Decrease speed
Cancel1
Resume2 /Increase speed
106464_2017_RAV4_QRG_D5_R1.indd 259/22/16 10:50 AM

27
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help detect vehicles and pedestrians in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not use PCS instead of normal braking operations under any circumstances. Do not attempt to test the operation of the pre-collision system yourself, as the system may not operate or engage, possibly leading to an accident. In some situations, such as when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a curve and for a few seconds after driving on a curve, a vehicle may not be detected by the radar and camera sensors, preventing the system from operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations in which the system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/PD operation,
settings adjustments, limitations, and precautions before attempting to use it.
Pre-Collision Warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the Multi-Information Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist If the driver notices the hazard and brakes, the system may provide additional braking force using Brake Assist. This system may prime the brakes and may apply greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking If the driver does not brake in a set time and the system determines that the possibility of a frontal collision with a preceding vehicle is extremely high, the system may automatically apply the brakes, reducing speed in order to help the driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
106464_2017_RAV4_QRG_D5_R1.indd 279/22/16 8:33 AM

28
CHANGING THE PCS ALERT TIMING
TOYOTA SAFETY SENSE™
FarMiddle(default)Near
p 244
p 243
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “” switches and select from the MID and then press “.”
(3) Select “Sensitivity” and then press “.”
Each time “” is pressed, the response to the PCS alert timing changes as shown
above. You can press “” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. The system can be disabled/enabled and the alert timing of the system can be changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter wave radar
As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS-P package may also help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ P, PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle camera of PCS detects a potential pedestrian based on size, profile, and motion of the detected pedestrian. However, a pedestrian may not be detected depending on the conditions, including the surrounding brightness and the motion, posture, size, and angle of the potential detected pedestrian, preventing the system from operating or engaging. Refer to a Toyota Owner’s Manual for additional information.
THE PCS WITH PEDESTRIAN DETECTION FUNCTION
106464_2017_RAV4_QRG_D5_R1.indd 289/22/16 8:34 AM

33
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
ADJUSTING DRCC SET SPEED
1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a
slower vehicle traveling in front and accelerate back up to the selected speed if the
vehicle in front changes lanes or speeds up.
(1) Push the ON-OFF button. The “RADAR READY” or “” indicator will come on.
(2) Push the lever down to SET speed, push it up to Resume and pull it or depress
brake to Cancel.
(3) Push up to increase the set speed, push down to decrease (1mph increments).
(3) (2)
ADJUSTING DISTANCE
To change the vehicle-to-vehicle distance
Push the “” button to cycle
through the settings, which will
change progressively.
Decrease speed
Increase speed
Cancel1
Resume2
Set
This mode employs a radar sensor to detect the presence of vehicles up to
approximately 328ft (100m) ahead, determines the current vehicle-to-vehicle
following distance and operates to maintain a suitable following distance from the
vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
LONG(default setting)MIDDLESHORT
Preceding vehicle mark
106464_2017_RAV4_QRG_D5_R1.indd 339/22/16 10:59 AM

34
SWITCHING TO CONSTANT SPEED CONTROL MODE
If you are already using DRCC “”, push ON-OFF button to turn the system off
first, then push and hold ON-OFF button for at least 1.5 seconds to switch.
Note: When the engine is turned off, it will automatically default to DRCC.
TOYOTA SAFETY SENSE™
1.5 seconds
(1) Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system applies the brakes (the stop lights will come on at this
time). The system will respond to changes in the speed of the vehicle ahead
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.
(3) Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Note: When your vehicle is too close to a vehicle ahead, and sufficient
automatic deceleration via the cruise control is not possible, the display will
flash and the buzzer will sound to alert the driver. An example of this would be
if another driver cuts in front of you while you are following a vehicle. Depress
the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
(1) (2) (3)
ADJUSTING DRCC DISTANCE (CONTINUED)
106464_2017_RAV4_QRG_D5_R1.indd 349/22/16 8:38 AM